AirConServiceCenter ASC2500 - WAECO - AirCon Service

AirCon Service Center
Service tasks
4. You are then prompted to remove the containers from the scale:
Scale empty?
ENTER-OK STOP-EXIT
5. To check the zero point of the scales for oil and UV additive, open the
cover (19) on the left side and take the containers off the catches:
- Container for fresh oil (16)
- Container for UV additive (17) and
- Drained oil receptacle (18)
17
16
19
18
When the scales are relieved, press ENTER to confirm. The prompt to
remove the containers from the scale will flash.
✓ Once you have set the zero point, the selection menu for the scales
appears again.
6. Return the containers to the operating positions:
Reattach the containers for oil (16) and (18) and for the UV additive
(17) to the snap locks and close the cover (19).
7. Press STOP twice to access the standby menu.
EN 91