AirConServiceCenter ASC2500 - WAECO - AirCon Service

Service tasks
AirCon Service Center
30. Select “Process start” by pressing ENTER.
✓ After filling is complete, you will be prompted to disconnect the hoses
of the AirConServiceCenter from the vehicle air conditioning system.
31. Disconnect the service hoses (10) and (11) and press ENTER to
confirm.
The service hoses are then emptied. The device is then ready for
further use.
32. Put the valve caps of the vehicle air conditioning system back on the
connections.
9 Service tasks
9.1 Calibrating the oil scales
I
NOTE
In order for the oil quantities and the UV additive to be measured correctly,
the zero point of the scales must be checked regularly and reset if
necessary.
Resetting is necessary:
• If the quantity in a container deviates by more than 10 ml from the target
value
• If the AirConServiceCenter has been shaken, for example during
transport on bumpy roads
• Every four to six weeks
1. In the basic menu, use the cursor keys or to select “Other
selections”:
Short selection
Free selection
Other selections
ENTER-OK
2. Press ENTER to confirm.
3. Use the cursor keys or to select “Reset scales”:
Int. vessel filling
Flushing
Reset scales.
Service.
90
EN