AirConServiceCenter ASC2500 - WAECO - AirCon Service

Operation
AirCon Service Center
8.6 Free selection
I
NOTE
The “Free selection” menu is used to perform air conditioning servicing
step-by-step. You can perform the same processes as in the short selection
menu, but also omit individual procedures. In addition, it is possible to enter
the values for each individual process using the keypad. You can also enter
the vehicle data for the service report in this menu.
The following four processes can performed individually in the “Free
selection” menu:
• Recycling phase: extraction, recycling of the refrigerant, pressure rise
test, draining the waste oil.
• Vacuum phase: evacuation of the system, leak test / vacuum check.
• Filling phase: filling with fresh oil, filling of UV additive, filling of
refrigerant.
• Selecting connections: The air conditioning system has a high pressure
and low pressure connection, high pressure or low pressure only
connections.
After each process has been performed, a service report is printed.
1. Start by fitting the connections of the AirConServiceCenter to the
vehicle air conditioning system, and opening them.
2. In the basic menu, use the cursor keys or to select “Free
selection”:
Short selection
Free selection
Other selections
ENTER-OK
3. Press ENTER to confirm.
4. Enter the vehicle data and press ENTER to confirm.
84
EN