AirConServiceCenter ASC2500 - WAECO - AirCon Service

Operation
AirCon Service Center
8.2 User codes
It is possible to protect the air conditioning service station from
unauthorised access using personal user codes. When this function is
activated, the system queries the user code after being switched on, and
the station cannot be started without it. Up to 10 different users can be
created, each with individual codes.
8.2.1 Creating user codes
1. In the basic menu, use the cursor keys or to select “Other
selections”:
Short selection
Free selection
Other selections
ENTER-OK
2. Press ENTER to confirm.
3. Use the cursor key to select “Service” and press ENTER to
confirm:
Flushing
Reset scales.
Service.
ENTER-OK STOP-EXIT
4. To access the “ADM” administrator menu, enter the password “9786”
and press ENTER to confirm:
Service.
5. Enter the administrator code “0000” (default setting) and press ENTER
to confirm:
Insert ADM Code
----
I
NOTE
For security reasons, a new administrator code must be selected each time,
but not “0000” as this will deactivate the entire function.
Users can be created using the administrator code.
6. Enter the new administrator code:
ADM AREA
Insert new code
----
----
76
EN