AirConServiceCenter ASC2500 - WAECO - AirCon Service
AirConServiceCenter ASC2500 - WAECO - AirCon Service AirConServiceCenter ASC2500 - WAECO - AirCon Service
Operation AirCon Service Center 8 Operation A NOTICE! When the air conditioning is being serviced, the engine and the air conditioning must be switched off. 8.1 Short selection I NOTE A fully automatic air conditioning service is started using the “Short selection” menu. You only have to enter the filling quantity as shown on the label in the vehicle, or as found in the database. The following actions are performed automatically in succession in the “Short selection” menu: – Extraction of the refrigerant – Recycling of the refrigerant (purity = SAE J 2099) – Pressure rise test – Draining the used oil – Evacuating the system – Leak test / vacuum check – Filling with new oil to the required quantity – Filling with UV additive – Filling of refrigerant After each process has been performed, a service report is printed. Subsequent actions are only initiated once the preceding action has been completed successfully. 1. First fit the service hoses for the AirConServiceCenter to the vehicle air conditioning system, and open the service couplings. 2. Press the cursor key or to access the basic menu. 3. In the basic menu, use the cursor keys or to select “Short selection”: Short selection Free selection Other selections ENTER-OK 4. Press ENTER to confirm. 5. Use the keypad (7) and the cursor keys to enter the vehicle data. 6. Press ENTER to confirm. 7. Enter the refrigerant filling quantity. Either use the value shown on the filling quantities sticker in the vehicle and enter it using the keypad (7) and the cursor keys, or use the AirConServiceCenter database. 74 EN
AirCon Service Center Operation A NOTICE! If in doubt, use the value shown on the label in the vehicle. Personal DB ALFA ROMEO ASTON MARTIN AUDI AUDI A8 (4D_) 1994-11.1997 g. 775 8. If necessary, use the keypad (7) and the cursor keys to enter the required data, and press ENTER to confirm. If no data is to be entered, press ENTER to switch to the next program step. ✓ If you press the “i” key in database mode, information on the oil quantities and oil types appears in the display (6). 9. Use the cursor keys or to select whether the air conditioning system has two connections (high pressure and low pressure) or one connection (high pressure or low pressure). ✓ ✓ Press ENTER to confirm. PAG ISO 46 ml. 250 WAECO CODE: 250cc 8887200001 50cc 8887200013 HP/LP PORT HP PORT LP PORT ENTER-OK STOP-EXIT The fully automatic air conditioning service is started. After the air conditioning service has finished, you will be prompted to disconnect the hoses (10) and (11) of the AirConServiceCenter from the vehicle air conditioning system. 10. Disconnect the service hoses (10) and (11) and press ENTER to confirm. The service hoses will now be drained. The device is then ready for further use. 11. Put the valve caps of the vehicle air conditioning system back on the connections. EN 75
- Page 24 and 25: Betrieb AirCon Service Center 7. Ne
- Page 26 and 27: Betrieb AirCon Service Center 8.3 P
- Page 28 and 29: Betrieb AirCon Service Center 4. Pa
- Page 30 and 31: Betrieb AirCon Service Center I HIN
- Page 32 and 33: Betrieb AirCon Service Center 8.6.1
- Page 34 and 35: Betrieb AirCon Service Center 3. We
- Page 36 and 37: Betrieb AirCon Service Center 17. M
- Page 38 and 39: Servicearbeiten AirCon Service Cent
- Page 40 and 41: Servicearbeiten AirCon Service Cent
- Page 42 and 43: Servicearbeiten AirCon Service Cent
- Page 44 and 45: Servicearbeiten AirCon Service Cent
- Page 46 and 47: Servicearbeiten AirCon Service Cent
- Page 48 and 49: Servicearbeiten AirCon Service Cent
- Page 50 and 51: Servicearbeiten AirCon Service Cent
- Page 52 and 53: Entsorgung AirCon Service Center 10
- Page 54 and 55: Was tun, wenn? AirCon Service Cente
- Page 56 and 57: Contents AirCon Service Center 1 Ab
- Page 58 and 59: About this operating manual AirCon
- Page 60 and 61: Safety AirCon Service Center Each t
- Page 62 and 63: Optional extras AirCon Service Cent
- Page 64 and 65: Overview of the AirConServiceCenter
- Page 66 and 67: Initial start-up AirCon Service Cen
- Page 68 and 69: Initial start-up AirCon Service Cen
- Page 70 and 71: Initial start-up AirCon Service Cen
- Page 72 and 73: Initial start-up AirCon Service Cen
- Page 76 and 77: Operation AirCon Service Center 8.2
- Page 78 and 79: Operation AirCon Service Center 8.2
- Page 80 and 81: Operation AirCon Service Center 8.
- Page 82 and 83: Operation AirCon Service Center 8.5
- Page 84 and 85: Operation AirCon Service Center 8.6
- Page 86 and 87: Operation AirCon Service Center 8.6
- Page 88 and 89: Operation AirCon Service Center 3.
- Page 90 and 91: Service tasks AirCon Service Center
- Page 92 and 93: Service tasks AirCon Service Center
- Page 94 and 95: Service tasks AirCon Service Center
- Page 96 and 97: Service tasks AirCon Service Center
- Page 98 and 99: Service tasks AirCon Service Center
- Page 100 and 101: Service tasks AirCon Service Center
- Page 102 and 103: Service tasks AirCon Service Center
- Page 104 and 105: Service tasks AirCon Service Center
- Page 106 and 107: Troubleshooting AirCon Service Cent
- Page 108 and 109: Technical data AirCon Service Cente
- Page 110 and 111: Acerca de estas instrucciones de us
- Page 112 and 113: Seguridad AirCon Service Center 2 S
- Page 114 and 115: Volumen de entrega AirCon Service C
- Page 116 and 117: Vista general del AirConServiceCent
- Page 118 and 119: Primera puesta en funcionamiento Ai
- Page 120 and 121: Primera puesta en funcionamiento Ai
- Page 122 and 123: Primera puesta en funcionamiento Ai
<strong>AirCon</strong> <strong>Service</strong> Center<br />
Operation<br />
A<br />
NOTICE!<br />
If in doubt, use the value shown on the label in the vehicle.<br />
Personal DB<br />
ALFA ROMEO<br />
ASTON MARTIN<br />
AUDI<br />
AUDI A8 (4D_)<br />
1994-11.1997<br />
g. 775<br />
8. If necessary, use the keypad (7) and the cursor keys to enter the<br />
required data, and press ENTER to confirm.<br />
If no data is to be entered, press ENTER to switch to the next program<br />
step.<br />
✓<br />
If you press the “i” key in database mode, information on the oil<br />
quantities and oil types appears in the display (6).<br />
9. Use the cursor keys or to select whether the air conditioning<br />
system has two connections (high pressure and low pressure) or one<br />
connection (high pressure or low pressure).<br />
✓<br />
✓<br />
Press ENTER to confirm.<br />
PAG ISO 46 ml. 250<br />
<strong>WAECO</strong> CODE:<br />
250cc 8887200001<br />
50cc 8887200013<br />
HP/LP PORT<br />
HP PORT<br />
LP PORT<br />
ENTER-OK STOP-EXIT<br />
The fully automatic air conditioning service is started.<br />
After the air conditioning service has finished, you will be prompted to<br />
disconnect the hoses (10) and (11) of the <strong><strong>AirCon</strong><strong>Service</strong>Center</strong> from<br />
the vehicle air conditioning system.<br />
10. Disconnect the service hoses (10) and (11) and press ENTER to<br />
confirm.<br />
The service hoses will now be drained. The device is then ready for<br />
further use.<br />
11. Put the valve caps of the vehicle air conditioning system back on the<br />
connections.<br />
EN 75