AirConServiceCenter ASC2500 - WAECO - AirCon Service
AirConServiceCenter ASC2500 - WAECO - AirCon Service AirConServiceCenter ASC2500 - WAECO - AirCon Service
Initial start-up AirCon Service Center 7.9 Filling up the internal refrigerant container I NOTE When the AirConServiceCenter is started for the first time, the internal refrigerant container must be filled from an external refrigerant tank with at least 5000g of refrigerant. Note the instructions on the refrigerant vessels. The current supply quantities are displayed in the standby menu. There are three different types of refrigerant vessel available: • Refrigerant bottles without rising pipe: These refrigerant bottles have one connection. When filling the AirConServiceCenter, the connection must be on the bottom (turn the bottle upside down). • Refrigerant bottles with rising pipe: These refrigerant bottles have one connection. When filling the AirConServiceCenter, the connection must be at the top (place the bottle upright). • Refrigerant bottles with rising pipe: These refrigerant bottles have two connections. To top up the AirConServiceCenter, use the connection marked with L (= liquid). When filling the AirConServiceCenter, the connection must be at the top (place the bottle upright). 1. In the basic menu, use the cursor keys or to select “Other selections”: 2. Press ENTER to confirm. 3. Use the cursor keys or to select “Int. vessel filling”: 4. Press ENTER to confirm. Short selection Free selection Other selections ENTER-OK Int. vessel filling Flushing Reset scales. Service. 72 EN
AirCon Service Center Initial start-up 5. Then follow the instructions in the display and provided here: Press ENTER to confirm. Connect the HP hose to the external tank then open the valve ENTER-OK STOP-EXIT Set the quantity then confirm! g. 13620 ENTER-OK STOP-EXIT The maximum refrigerant quantity which can be added appears in the display. Enter the required amount and press ENTER to confirm. The internal refrigerant container is filled. When the filling process is finished, this will be confirmed by an acoustic signal. Close the valves and press ENTER to confirm. 6. After filling, the quantity of refrigerant in the internal container is displayed. Press STOP to exit the menu. Press STOP again to access the standby menu. The device is now ready for operation. EN 73
- Page 22 and 23: Betrieb AirCon Service Center A ACH
- Page 24 and 25: Betrieb AirCon Service Center 7. Ne
- Page 26 and 27: Betrieb AirCon Service Center 8.3 P
- Page 28 and 29: Betrieb AirCon Service Center 4. Pa
- Page 30 and 31: Betrieb AirCon Service Center I HIN
- Page 32 and 33: Betrieb AirCon Service Center 8.6.1
- Page 34 and 35: Betrieb AirCon Service Center 3. We
- Page 36 and 37: Betrieb AirCon Service Center 17. M
- Page 38 and 39: Servicearbeiten AirCon Service Cent
- Page 40 and 41: Servicearbeiten AirCon Service Cent
- Page 42 and 43: Servicearbeiten AirCon Service Cent
- Page 44 and 45: Servicearbeiten AirCon Service Cent
- Page 46 and 47: Servicearbeiten AirCon Service Cent
- Page 48 and 49: Servicearbeiten AirCon Service Cent
- Page 50 and 51: Servicearbeiten AirCon Service Cent
- Page 52 and 53: Entsorgung AirCon Service Center 10
- Page 54 and 55: Was tun, wenn? AirCon Service Cente
- Page 56 and 57: Contents AirCon Service Center 1 Ab
- Page 58 and 59: About this operating manual AirCon
- Page 60 and 61: Safety AirCon Service Center Each t
- Page 62 and 63: Optional extras AirCon Service Cent
- Page 64 and 65: Overview of the AirConServiceCenter
- Page 66 and 67: Initial start-up AirCon Service Cen
- Page 68 and 69: Initial start-up AirCon Service Cen
- Page 70 and 71: Initial start-up AirCon Service Cen
- Page 74 and 75: Operation AirCon Service Center 8 O
- Page 76 and 77: Operation AirCon Service Center 8.2
- Page 78 and 79: Operation AirCon Service Center 8.2
- Page 80 and 81: Operation AirCon Service Center 8.
- Page 82 and 83: Operation AirCon Service Center 8.5
- Page 84 and 85: Operation AirCon Service Center 8.6
- Page 86 and 87: Operation AirCon Service Center 8.6
- Page 88 and 89: Operation AirCon Service Center 3.
- Page 90 and 91: Service tasks AirCon Service Center
- Page 92 and 93: Service tasks AirCon Service Center
- Page 94 and 95: Service tasks AirCon Service Center
- Page 96 and 97: Service tasks AirCon Service Center
- Page 98 and 99: Service tasks AirCon Service Center
- Page 100 and 101: Service tasks AirCon Service Center
- Page 102 and 103: Service tasks AirCon Service Center
- Page 104 and 105: Service tasks AirCon Service Center
- Page 106 and 107: Troubleshooting AirCon Service Cent
- Page 108 and 109: Technical data AirCon Service Cente
- Page 110 and 111: Acerca de estas instrucciones de us
- Page 112 and 113: Seguridad AirCon Service Center 2 S
- Page 114 and 115: Volumen de entrega AirCon Service C
- Page 116 and 117: Vista general del AirConServiceCent
- Page 118 and 119: Primera puesta en funcionamiento Ai
- Page 120 and 121: Primera puesta en funcionamiento Ai
Initial start-up<br />
<strong>AirCon</strong> <strong>Service</strong> Center<br />
7.9 Filling up the internal refrigerant container<br />
I<br />
NOTE<br />
When the <strong><strong>AirCon</strong><strong>Service</strong>Center</strong> is started for the first time, the internal<br />
refrigerant container must be filled from an external refrigerant tank with at<br />
least 5000g of refrigerant.<br />
Note the instructions on the refrigerant vessels.<br />
The current supply quantities are displayed in the standby menu.<br />
There are three different types of refrigerant vessel available:<br />
• Refrigerant bottles without rising pipe:<br />
These refrigerant bottles have one connection.<br />
When filling the <strong><strong>AirCon</strong><strong>Service</strong>Center</strong>, the connection must be on the<br />
bottom (turn the bottle upside down).<br />
• Refrigerant bottles with rising pipe:<br />
These refrigerant bottles have one connection.<br />
When filling the <strong><strong>AirCon</strong><strong>Service</strong>Center</strong>, the connection must be at the<br />
top (place the bottle upright).<br />
• Refrigerant bottles with rising pipe:<br />
These refrigerant bottles have two connections. To top up the<br />
<strong><strong>AirCon</strong><strong>Service</strong>Center</strong>, use the connection marked with L (= liquid).<br />
When filling the <strong><strong>AirCon</strong><strong>Service</strong>Center</strong>, the connection must be at the<br />
top (place the bottle upright).<br />
1. In the basic menu, use the cursor keys or to select “Other<br />
selections”:<br />
2. Press ENTER to confirm.<br />
3. Use the cursor keys or to select “Int. vessel filling”:<br />
4. Press ENTER to confirm.<br />
Short selection<br />
Free selection<br />
Other selections<br />
ENTER-OK<br />
Int. vessel filling<br />
Flushing<br />
Reset scales.<br />
<strong>Service</strong>.<br />
72<br />
EN