AirConServiceCenter ASC2500 - WAECO - AirCon Service

AirCon Service Center
Initial start-up
7.6 Editing default values
The AirConServiceCenter has preset values for the most important
service tasks. The default values appear automatically when you select
the respective menu.
You can alter the following default values if necessary:
Parameter:
Default value:
Pressure increase test time min. 1
Vacuum time min. 20
Leak test min. 4
PAG oil ml. (additional quantity) 0
UV tracer ml. 7
Filling Qt. g. 500
Print recovery value?
1. In the basic menu, use the cursor keys or to select “Other
selections”:
Short selection
Free selection
Other selections
ENTER-OK
2. Press ENTER to confirm.
3. Use the cursor key to select “Service”.
4. Press ENTER to confirm.
5. Enter the password “7388”.
6. Use the keypad and the cursor keys to enter the information.
7. Press ENTER to confirm.
8. Press STOP to access the standby menu.
Yes
EN 69