AirConServiceCenter ASC2500 - WAECO - AirCon Service

AirCon Service Center
Initial start-up
7 Initial start-up
7.1 Setting up and switching on
I
NOTE
1. Wheel the AirConServiceCenter to the workplace and lock the front
wheels (9).
During operation, the device must be on a horizontal, flat surface so that
measurements can be made correctly.
2. Connect the AirConServiceCenter to the mains.
3. To switch it on, set the main switch (20) to I.
The software version number appears in the display (6) for several
seconds:
✓
“SW”: Software status
“DB”: Database
“SN”: Series number
WAECO INTERNATIONAL
ASC 2500 SW x.xx
DB x.xx
SN 000000
The AirConServiceCenter then runs a software test.
Software test.
Please wait
✓
When the start-up procedure is complete, the AirConServiceCenter
displays the following:
Refrigerant g. 4820
PAG oil ml 375
UV tracer ml 313
11:56:35 10/03/11
EN 65