AirConServiceCenter ASC2500 - WAECO - AirCon Service

Technical data
AirCon Service Center
Problem Cause Remedy
The display shows
“Error 10”
The display shows
“Error 11”
The display shows
“Error 12”
It was not possible to reduce
the pressure sufficiently
during the "Software test".
It was not possible to drain
any used oil during the
"Software test".
It was not possible to remove
any refrigerant from the
internal tank during the
"Software test".
Residual pressure on the
pressure gauges? Check
pressure transducer
calibration. Check internal
bottle pressure. Check the
compressor and the
corresponding solenoid
valves.
Insert receptacle for drained
oil correctly. Check that the
solenoid valve can move
freely. Check that the scale is
working properly.
Check pressure transducer
calibration.
Check if the valve on the
internal tank is open. Check
the RE valve.
12 Technical data
ASC2500 AirCon Service Center ASC 2500
Item number: 8885200095
Dimensions (width x height x depth):
560 mm x 1300 mm x 650 mm
Weight:
100 kg
Power supply:
230 V/240 V – 50 Hz/60 Hz
Refrigerant extraction rate:
30 kg / h
Vacuum pump output:
5 cars / h
Hermetic compressor output:
0.32 kW
Drier filter output:
150 kg
Filling cylinder accumulator capacity:
16 kg
Noise emission:
55.5 dB (A)
Accuracy of the electronic scale for refrigerant:
± 10 g
Accuracy of the electronic scale for old/new oil:
± 1 g
Accuracy of the electronic scale for UV additive: ± 1 g
Operating temperature range: + 5 °C to + 50 °C
108
EN