Powerpod 620 Powerpod 740 Powerpod 780 Powerpod 1062

More documents

Recommendations

Info

32. Phantom Power Switch and Indicator When this switch is in the on position it activates +48V of Phantom Power for all XLR jacks of all channels on the Powerpod Mixers, allowing condenser microphones to be used on these channels. The corresponding LED will illuminate when the Master Phantom Power is activated. 32 33. Amp Select Switches This switches control the activity of the built-in power amp, enabling the user to alternate between the different signals which can be processed by the built-in power amp and routed to the speaker outputs on the rear of the device. This switch allows you to select from: Main/Monitor – taking the monitor and main signals and directing them to the appropriate speaker outputs – Main L / Main R – using the Main L/R signal to feed the speaker outputs – and Main Bridge – which combines the Main Left and Right signal and feeds them through the (L+R) Bridge output. NB. When using a mono bridge connection, do not connect a speaker to any of the Main/Monitor A or B jacks, located on the rear of the mixer. Use the "(L+R) Bridge" speaker jack only. 34. Monitor Level Control This rotary control allows the user to adjust the final signal level sent to all Monitor outputs. 38 36 37 34 35. Main Level Control This rotary control allows the user to adjust the final signal level sent to the Main L-R and Speaker outputs. 36. Level Meter These level meters give accurate indications of when audio levels of the Main L/R stereo (or Main mono) and Monitor outputs reach certain levels. The 0 dB indicator illuminates is approximately equal to an output level of +4 dBu. It is suggested for the maximum use of audio to set the various levels controls so that it sits steadily between 0 and the second highest level indicated on the Level Meter to make full use of audio, while still maintaining fantastic clarity. The 620 Plus features a single dual 5-segment LED display, the 740 and 780 Plus feature two single 5-segment LED displays (for monitor and main signals), and the 1062 Plus features a single 5-segment Monitor LED level display and a dual 5-segment Main LED level display. 33 35 37. Limiters (Powerpods 740, 780 and 1062 Plus only) These LED indicators illuminate when the power amplifier’s built-in limiters are activated, which effectively reduce signal levels when they reach high levels that could prove to damage sound quality. 38. Power Indicator This LED indicator illuminates when power of your Powerpod Mixer is activated. 10 POWERPOD 620 / 740 / 780 / 1062
Specifications POWERPOD 620 PLUS POWERPOD 740 PLUS POWERPOD 780 PLUS POWERPOD 1062 PLUS Number of Power Channels 2 2 2 2 Limiter N/A 2 2 2 8 ohms per Channel 70 135 200 200 4 ohms per Channel 100 200 300 300 8 ohms Bridge Mono N/A 400 N/A 600 Crosstalk (1KHz@0dBu, 20Hz to 20KHz bandwidth, channel in to main L/R outputs) Channel muted, other channels at unity Frequency Response at proper impedance load N/A
Page 1 and 2: Powerpod 620 Powerpod 740 Powerpod
Page 4 and 5: INTRODUCTION Phonic Corp would like
Page 6 and 7: Master Section 4. Tape In (L and R)
Page 8 and 9: CONTROLS AND SETTINGS Rear Panel 13
Page 12: Foot Switch Digital effect mute: ON
Page 15 and 16: CONFIGURACION BASICA Iniciando 1. A
Page 17 and 18: Panel Trasero 12. Salidas de Altavo
Page 19 and 20: 23. Indicadores de Señal y Recorte
Page 21 and 22: ESPECIFICACIONES Número de Canales
Page 23 and 24: 重要安全说明 1. 请在
Page 25 and 26: 基本安装开始设定 1.
Page 27 and 28: 14. 电压选择器此开关
Page 29 and 30: 32. 幻象电源开关以及
Page 31 and 32: 内建图形均衡器立体
Page 33 and 34: APPLICATIONS APLICACIONES 应用 P
Page 35 and 36: Powerpod 740 / 780 Plus KEYBOARD TE
Page 37 and 38: Powerpod 1062 Plus ELECTRIC GUITAR
Page 39 and 40: BLOCK DIAGRAMS DIAGRAMAS DE BLOQUE
Page 41 and 42: Powerpod 780 Plus POWERPOD 620 / 74
Page 43: TO PURCHASE ADDITIONAL PHONIC GEAR

Powerpod 620 Powerpod 740 Powerpod 780 Powerpod 1062

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?