Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
2 Mechanical Installation<br />
Main Circuit Wiring<br />
<strong>Drive</strong> Side Wiring Hole Diameter (mm) <br />
<strong>Drive</strong> Size Input Output<br />
A 28.8 28.8<br />
B 37 37<br />
Recommended Cable Glands<br />
(Lapp Kabel)<br />
Input / Output Wiring<br />
Cable Gland No./Model<br />
Cable Diameter<br />
<br />
(mm)<br />
Body: 53015150/STR 21<br />
Locknut: 53019050/GMP-GL21<br />
Body: 53015050/ST 21<br />
Locknut: 53019050/GMP-GL21<br />
Body: 53015160/STR 29<br />
Locknut: 53019060/GMP-GL29<br />
Body: 53015060/ST 29<br />
Locknut: 53019060/GMP-GL29<br />
9 to 16<br />
13 to 18<br />
11 to 22<br />
14 to 25<br />
Tightening Torque<br />
(Nm)<br />
Body: 5.0<br />
Locknut: 7.5<br />
Body: 5.0<br />
Locknut: 7.5<br />
Separate holes have been provided for input, output, and option wiring (total of 4 holes).<br />
Note that the cable gland body and locknut are usually sold separately.<br />
Note: Main circuit wires should be multiconductor 600 V vinyl insulated line with a continuous maximum allowable temperature of over 70C (such as ÖLFLEX® CLASSIC<br />
100/100CY by Lapp Kabel).<br />
Note: For single phase input, use 3 wire cable, and for 3-phase input, use 4 wire cable.<br />
Note: Always use shielded motor cables.<br />
Control Circuit Wiring<br />
<strong>Drive</strong> Side Wiring Hole <br />
Recommended Cable Glands for I/O Wiring (Lapp Kabel)<br />
Diameter (mm) Number of Holes Cable Gland No./Model Cable Diameter (mm) Tightening Torque (Nm)<br />
Sealing grommets fitted to control circuit wiring holes on reception.<br />
Note that the cable gland body and locknut are usually sold separately.<br />
Note:<br />
23 2<br />
Main circuit wires should be multiconductor shielded line with a continuous maximum allowable temperature of over 70C (such as ÖLFLEX® CLASSIC 110/115CY<br />
and UNITRONIC® LiYCY (TP) by Lapp Kabel).<br />
• Dimensions - Lapp Kabel SKINTOP<br />
Body: 53015140/STR 16<br />
Locknut: 53019040/GMP-GL16<br />
Body: 53015040/ST 16<br />
Locknut: 53019040/GMP-GL16<br />
SW 15°<br />
D<br />
C<br />
SW<br />
Cap<br />
6 to 12<br />
9 to 14<br />
Body: 3.3<br />
Locknut: 5.0<br />
PG<br />
φA<br />
PG<br />
Cable Glands for Control Wiring (glands are plastic)<br />
B<br />
Locknut<br />
Body<br />
Part No. Model PG Size Wrench Size SW (mm) A (mm) B (mm) C (mm) D (mm)<br />
53015140 STR 16<br />
Body<br />
16 27 - - 44 10<br />
53015040 ST 16<br />
Locknut 53019040 GMP-GL 16 16 30 33 6 - -<br />
Cable Glands for Main Circuit Input and Output Wiring (glands are plastic)<br />
Part No. Model PG Size Wrench Size SW (mm) A (mm) B (mm) C (mm) D (mm)<br />
Body<br />
LockNut<br />
53015150 STR 21<br />
21 34<br />
53015050 ST 21<br />
53015160 STR 29<br />
53015060 ST 29<br />
49 11<br />
- -<br />
29 42 56 11<br />
53019050 GMP-GL 21 21 36 39 7<br />
- -<br />
53019060 GMP-GL 29 29 46 50 7<br />
<strong>YASKAWA</strong> Europe TOMP_C710606_75A <strong>V1000</strong> <strong>IP66</strong> - Quick Start Guide EN 11
Change language