Operator'sIVianual - Ppe-pressure-washer-parts.com

OWNER'SRESPONSiBiLiTiES
Follow the hourly or calendar intervals, whichever occurs
first. More frequent service is required when operating in
adverseconditions noted below.
* Changeengine oil
* Check/clean water inlet screen'
* Check high pressure hose
* Check detergentsiphoning hose
* Check spray gun and assembly for leaks
* Cleandebris
* Check engineoil level
• Service engineair cleaner2
* Service spark plug
* Cleancooling system2
Clean if clogged. Replace if perforated or torn.
2Service more often under dirty or dusty conditions.
GeneralRecommendations
Regular maintenance will improve the performance and
extendthe life of the pressurewasher. Seeany Sears or
other qualified service dealerfor service.
The pressure washer warranty does not cover items that
have beensubjected to operator abuse or negligence.To
receivefull value from the warranty, the operator must
maintain pressurewasher as instructed in this manual
including proper storage as detailed in Storage.
Some adjustments will needto be made periodically to
properly maintain your pressurewasher.
All service and adjustments should be made at least once
each season. Follow the requirements in the Maintenance
Schedule chart above.
NOTICE Oncea year you should clean or replace the spark
plug and replace the air filter. A new spark plug and clean air
filter assure proper fuel-air mixture and helpyour engine run
better and last longer.
Pump Oil
DO NOTattempt any oil maintenance on this pump. The
pump is pre-iubricated and sealedfrom the factory, requiring
no additional maintenancefor the life of the pump.
EmissionsControl
Maintenance,replacement, or repair of the emissions
controldevices and systemsmay be performed by any nonroad
engine repair establishment or individual. However,
to obtain "no charge" emissions control service, the work
must be performed by a factory authorizeddealer. Seethe
Emissions Warranty.
BeforeEachUse
1. Checkengine oil level.
2. Cleandebris.
3. Checkwater inlet screenfor damage.
4. Checkhigh pressure hose for leaks.
5. Checkgun and spray tip extension assemblyfor leaks.
6. Purge pump of air and contaminants.
PRESSUREWASHERMAINTENANCE
Clean Debris
Daily or before use, clean accumulateddebris from pressure
washer. Keeplinkage, spring and controls clean. Keeparea
around and behind muffler free from any combustible debris.
inspect cooling air slots and openings on the pressure
washer. Theseopenings must be kept clean and
unobstructed.
Pressurewasher parts should be kept clean to reduce the
risk of overheating and ignition of accumulated debris.
* Usea damp cloth to wipe exterior surfaces clean.
NOTICE improper treatment of pressurewasher can
damage it and shorten its life.
• DONOTinsertanyobjectsthroughcoolingslots.
* Usea soft bristle brush to loosen caked on dirt, oil, etc.
* Usea vacuum cleaner to pick up loose dirt and debris.
Checkand Clean Inlet Screen
Examinegarden hose inlet screen. Cleanif it is clogged or
replace if it is torn.
CheckHigh Pressure Hose
High pressure hoses can develop leaksfrom wear, kinking,
or abuse, inspect hose before each use. Check for cuts,
leaks, abrasions, bulging of cover, or damage or movement
of couplings. If any of these conditions exist, replace hose
immediately.
_lLWARNING The high pressure stream of water that
this and equipment its underlying produces tissues, can leading cut through to serious skin
injury and possible amputation.
• NEVERrepairhighpressurehose.Replaceit.
• ReplacementhoseratingMUSTexceedmaximumpressure
ratingof unit.
17