b - Fagor

PROG.7'05 11/4/05 10:33 Página 37
To set the cooking duration time:
1. Place the food inside the oven, select a cooking function and set a temperature.
2. Press the button and the symbol will start to flash.
3. Set the desired time by turning the “- , +” control (maximum 10 hours).
Example: I want the timer to operate the oven automatically for 45 minutes.
After a few seconds, the function will be activated, the oven will start working, the
symbol will remain lit and the screen will display a countdown of the time
remaining until conclusion of the cooking.
If you wish to display the time, press the button several times until the
symbol flashes. The screen will display the current time for a few seconds and will
then go back to displaying the countdown of time remaining before cooking
finishes.
Once the pre-set time has elapsed, the oven will turn itself off automatically and
start to beep for 60 seconds while the symbol flashes. After this time, the oven
will stop beeping but the symbol will continue to flash. Press any button to stop it
flashing.
If you wish to silence the beeping before the 60 seconds are up, press any button.
WARNING: If the oven is working, remember that the beeper function does not
stop it operating. Therefore, if you wish to stop cooking, do not forget to turn the
function selector and the temperature selector to the “0” position.
To change the cooking duration time:
Press the button and the symbol will start to flash. Set the cooking duration
time by turning the ”- , +” control.
To cancel the cooking duration time:
1. Press the button and the symbol will start to flash.
2. Turn the “- , +” control round towards “-“ as far as you can until the time displayed
on the screen is “0:00”.
After a few seconds, the symbol will go off and the screen will start to display
the current time. The cooking duration function will have been cancelled.
37