La Opinión del Experto + - TELE-satellite International Magazine

■
■
Finished! All of the panels
have been installed.
The parabolic form takes shape automatically
as the wire mesh panels are
placed on the frame.
96 TELE-satellite & Broadband — 12-01/2009 — www.TELE-satellite.com
■
After preparing the mast foundation and
the installation of the feed arms and the
LNB, the dish is ready to be put to work!
■
■
This is what one of the rolled out
panels looks like before installation.
The Az/El mount of
the dish.
Now the fun really starts. The new dish is
aligned with INSAT 2E, 3B, 4A at 83.0 east. The
two LNBs to the right of the focal point are
pointed to THAICOM 2,5 (78.5E) and TELSTAR
10 (76.5E). The first LNB to the left of the focal
point is used to receive both ST 1 (88.0E) and
CHINASTAR 1 (87.5E). The remaining LNBs
are aligned to MEASAT 3 (91.5E), INSAT 3A, 4B
(93.5E), EXPRESS AM 33 (96.5E) with the far left
LNB pointed to ASIASAT 2 (100.5E). All of these
satellites are continuously scanned by AutoScan
PCs; the results of these scans can be seen at
any time in the SatcoDX satellite charts:
www.satcodx3.com/0766, www.satcodx3.com/0786
www.satcodx3.com/0831, www.satcodx3.com/0880
www.satcodx3.com/0875, www.satcodx3.com/0916
www.satcodx3.com/0935, www.satcodx3.com/0965
und www.satcodx4.com/1005.
Now when you look at these scan, you will
know what LNB and dish is used to provide this
information.
■