Smart (50Hz) - domnick hunter

English
Y Correctly connect the dryer to the compressed air inlet/outlet
connections.
Y For correct installation, follow the instructions given in par.
8.2 and 8.3.
All dryers must be fitted with adequate pre---filtration near the
dryer air inlet. Seller is excluded any obbligation of compensation
or refund for any direct or indirect damage caused by its absence.
Y Pre---filter element (for 3 micron filtration or better) must
be replaced at least once a year, or sooner as per manufacturer
recommendations.
3.2 Operating space
Leave a space of 1.5 m around the unit.
Leave a space of 2 m above dryer models with vertical condensation
air expulsion.
3.3 Versions
Air---cooled version (Ac)
Do not create cooling air recirculation situations. Do not obstruct
the ventilation grilles.
Water---cooled version (Wc)
If not provided in the supply, fit a mesh filter on the condensation
water inlet.
Y , Inlet condensation water characteristics:
Temperature ≥ 50˚F (10˚C) CaCO3 70---150 ppm
Pressure
43.5---145 PSIg
(3---10 barg)
O2