15.06.2013 Views

Libretto D-NECT OK - Dainese

Libretto D-NECT OK - Dainese

Libretto D-NECT OK - Dainese

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

Switching on a helmet.<br />

Press the multifunction button for 3 seconds until the LED stays on permanently,<br />

which will be confirmed by a tone in the headphones. Release the button.<br />

The LED will start to flash slowly, which means the helmet is on.<br />

Interphone function.<br />

First switch on the Slave helmet and then the Master helmet.<br />

As soon as it is switched on the Master will search for the Slave and link to it<br />

automatically. The helmets are now ready to communicate with each other, and<br />

the Master can also communicate with the telephone it has been linked to.<br />

If the two helmets cannot trace each other (low-pitched tone in the headphones),<br />

switch them both off and repeat the operation.<br />

Any two helmets that are switched on and linked may be conlinked at any time<br />

by pressing the Master helmet button for 2 seconds (until the headphones emit<br />

a tone).<br />

Telephone function.<br />

Switch on the helmet (Master or Slave).<br />

As soon as the LED starts flashing, the helmet is ready for use with the phone<br />

it has been linked to. The phone must also be switched on.<br />

When a pre-linked helmet and telephone are unable to trace each other, switch<br />

them both off and then back on again, or repeat the linking procedure.<br />

N.B.: ensure that the helmet is always at the top of the list of devices linked to<br />

the telephone. If the helmet is not the first on the list the functions are limited.<br />

The telephone options enable a device to be set back to first place if it has<br />

been replaced by a device linked more recently.<br />

N.B.: A Master helmet, which is ON and nected to a telephone, may be linked<br />

to a Slave helmet (also ON) at any time, even if the Slave is already linked to<br />

its own telephone. Simply press the multifunction button on the Slave helmet<br />

for 2 seconds (until the headphones emit a tone). The helmets must be within<br />

10 metres of each other.<br />

Example: I go for a ride on my motorcycle and nect my Master helmet to my<br />

Bluetooth mobile phone. I meet my girlfriend, who is on her scooter and has<br />

her Slave helmet ON and linked to her telephone.<br />

My girlfriend gets on my motorcycle, I press the button on my Master helmet<br />

for 2 seconds and I link to my girlfriend’s Slave helmet in interphone mode.<br />

Both mobile phones will operate in accordance with the functions described in<br />

the “Telephone use” section.<br />

18

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!