Mycotrim® RS - Irvine Scientific
Mycotrim® RS - Irvine Scientific
Mycotrim® RS - Irvine Scientific
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
DIRECTIONS FOR USE<br />
1. Preparation of Flask<br />
A. Loosen the flask cap 1/4 to 1/2 turn and warm the flask<br />
in the incubator (34° C to 37° C) for approximately five<br />
minutes.<br />
B. Aseptically add antimicrobial discs according to specimen<br />
type:<br />
Specimen Source Antimicrobial Discs<br />
Throat 1 CN, 1 TA<br />
Bronchial washings 1 CN, 1 TA<br />
Pneumocentesis fluid 1 CN, 1 TA<br />
Tissue from biopsy 1 CN, 1 TA<br />
Sputum 2 CN, 2 TA<br />
C. Recap the flask tightly and place it agar side down, as<br />
shown below in Figure 1, for a minimum of 30 minutes.<br />
BROTH<br />
AGAR<br />
Figure 1<br />
2. Inoculation<br />
Use aseptic technique.<br />
A. For liquid specimens such as bronchial washings, pneumocentesis<br />
fluid and washings of tissue biopsy:<br />
1. Hold the flask at about a 45° angle as shown in Figure 2<br />
and allow approximately 1.0 mL of specimen to slow flow<br />
down the center of the agar.<br />
2. As the pipet is withdrawn from the flask, press it firmly into<br />
the agar to make a deep cut in the area inoculated.<br />
English 4/10