Instalación - Mabe
Instalación - Mabe
Instalación - Mabe
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Installation Instructions<br />
REMOVING THE FREEZER DRAWER (on some models)<br />
The freezer drawer can be removed, if needed,<br />
to fit through tight areas.<br />
Read these instructions completely and carefully.<br />
1<br />
A<br />
B<br />
C<br />
2<br />
A<br />
REMOVE THE BASKET<br />
Open the freezer drawer until it stops.<br />
The freezer basket rests on a frame inside the<br />
freezer drawer. Lift the basket up at the back.<br />
Lift the front up and lift the entire basket up<br />
and out of the drawer.<br />
REMOVE THE DRAWER FRONT<br />
Remove the screw on each side of the railing.<br />
Screw<br />
A<br />
60<br />
2<br />
B<br />
C<br />
D<br />
3<br />
A<br />
REMOVE THE DRAWER FRONT (cont.)<br />
Lift up on both sides of the freezer drawer<br />
handle to separate the drawer railings from<br />
the rail assemblies.<br />
Set the drawer front on a non-scratching<br />
surface.<br />
Push the rail assemblies back into locking<br />
position.<br />
Rail Assembly<br />
Drawer<br />
Assembly<br />
REMOVE THE BASE GRILLE<br />
(if needed)<br />
If, after removing the freezer drawer and<br />
refrigerator door, the refrigerator will still not<br />
fit through a doorway, the base grille can be<br />
removed.<br />
Remove the base grille by removing the<br />
screws.