Manual de instalación - Mabe
Manual de instalación - Mabe
Manual de instalación - Mabe
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
1<br />
2<br />
34<br />
1<br />
2<br />
To adjust the position of your half shelves, lightly lift the<br />
front of the shelf and sli<strong>de</strong> it forward until it rests loosely<br />
on the support points; when it is approximately half way<br />
to these points, shift the shelf to the si<strong>de</strong>.<br />
The placement of the half shelf is similar: introduce it to<br />
approximately the mid-point of the refrigerator, rest it<br />
against the si<strong>de</strong> of the refrigerator and push backwards<br />
until it rests on its support points.<br />
The shelf is not completely horizontal, it is slightly raised<br />
in the center so that when heavy objects are placed on it<br />
it levels out - this is completely normal. The maximum<br />
recommen<strong>de</strong>d load for this shelf is 8 kg (17.6 lb).<br />
removable freezer base<br />
Only certain mo<strong>de</strong>ls come equipped with a removable<br />
base.<br />
The freezer base can be removed to facilitate cleaning if<br />
liquid spillage occurs.<br />
To remove the base, pull it towards you.<br />
Do not let liquids and objects fall against the interior air<br />
vent.<br />
For your refrigerator to run well, ensure that the base is<br />
always in its correct position; after cleaning, replace the<br />
base by sliding it smoothly into place.<br />
door bins<br />
Depending on its mo<strong>de</strong>l, your refrigerator comes equipped<br />
with a double <strong>de</strong>ep door (which is the largest on the<br />
market), and some of the following shelves (<strong>de</strong>pending<br />
on the mo<strong>de</strong>l):<br />
sli<strong>de</strong>-out bins<br />
Some mo<strong>de</strong>ls have sli<strong>de</strong>-out bins which allow greater<br />
versatility of internal storage and distribution. To move<br />
the sli<strong>de</strong>-out bins, gently sli<strong>de</strong> them into the <strong>de</strong>sired position.<br />
Remove any foods which may be stored on them to avoid<br />
their falling over during the adjustment.