Manual de instalación - Mabe

1
2
3
4
5
6
to remove the drawers:
Remove the drawer until the ceiling, lift slightly to emerge
from its riel and pull out.
If you require withdraw the ensemble of drawers and covers,
pull as a normal grill.
shelves
Some models have spill-proof shelves tempered glass shelves
with plastic frames and anti-spill edges, which prevent
small liquid spillages in your refrigerator.
Other models have wire shelves. Both kind of shelves are
multipositional. The maximum recommended load for
the shelf is 25 kg (55Lb).
if it is necessary to remove the glass shelves:
Remove all foods and objects placed on them.
Place both hands on the front part of the shelf, as
demonstrated in the picture.
With your fingertips, gently pull the shelf towards
you.
Once the rear section of the shelf is lifted, pull it
towards you, taking care to grasp it firmly.
To replace the shelve on the desireds upport, make
sure that the support is between the shelf edge and
the surface, as shown in the picture, and push it until you
feel the catch of the shelf joint.
To change the position of other shelves, proceed in
the same manner.
half shelves
Your refrigerator may be equipped with half shelves.
These can be used only on the first three levels of your
refrigerator.
When adjusting or removing the shelves, make sure to
remove all food items stored in this area and to hold the
shelves with both hands.
shelve
railway
33
1
2
4
6