© 2006 GeoVision, Inc. All rights reserved. Under the copyright laws ...
© 2006 GeoVision, Inc. All rights reserved. Under the copyright laws ...
© 2006 GeoVision, Inc. All rights reserved. Under the copyright laws ...
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
1.6 Connecting Hardware Watchdog<br />
1<br />
Video Capture Cards<br />
To reboot <strong>the</strong> computer by <strong>the</strong> hardware watchdog on <strong>the</strong> GV-Video Capture Card,<br />
a connection needs to be made from <strong>the</strong> card to <strong>the</strong> mo<strong>the</strong>rboard.<br />
1. Using <strong>the</strong> supplied jumper wire, connect <strong>the</strong> reset jumper pins on <strong>the</strong> card and<br />
on <strong>the</strong> mo<strong>the</strong>rboard.<br />
<strong>GeoVision</strong> GV-600v2<br />
PC Reset Switch<br />
RST<br />
HDD<br />
+ _<br />
PWSW<br />
LED<br />
GV-600 v2 Mo<strong>the</strong>rboard<br />
Front Panel Jumper<br />
Figure 1-8 Watchdog connections<br />
2. If <strong>the</strong> computer has a reset switch, <strong>the</strong> switch’s jumper wire should already be<br />
connected to <strong>the</strong> mo<strong>the</strong>rboard’s reset jumper pins. Remove <strong>the</strong> switch wire from<br />
<strong>the</strong> mo<strong>the</strong>rboard and connect it to <strong>the</strong> reset jumper pins on <strong>the</strong> card.<br />
19
Change language