Independent air conditioning system Aermec Idrobloc-C Data sheet
Independent air conditioning system Aermec Idrobloc-C Data sheet
Independent air conditioning system Aermec Idrobloc-C Data sheet
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
IDROBLOC C<br />
R407C<br />
Features<br />
Unit for roof-hanging installation<br />
All versions are supplied for use with R407C<br />
Cooling only version<br />
Compact dimensions<br />
Centrifugal fan with vertical <strong>air</strong> delivery for<br />
possible ducted installation<br />
Evaporator dimensioned for working with<br />
Δt = 2.5 °C<br />
Antifreeze electric heater for the plate heat<br />
exchanger (as standard)<br />
Accessories<br />
PR3: Simplified remote panel. Allows basic<br />
machine checks to be carried out (turning on<br />
and off, signalling of alarms and season changeover).<br />
Can be made remote with shielded<br />
cable up to 30 m.<br />
Air cooled chiller with radial fan<br />
With capacity from 3.5 up to 8.2 kW<br />
IDROBLOC C is a low-consumption water chiller assembly designed for outdoor installa-<br />
tion, sized to provide a water flow sufficient to run a relatively high number of terminal<br />
units. The thermal head of water to the evaporator can be contained to 2.5°C; in practical<br />
terms, this means that the <strong>system</strong> can run fancoils in all rooms, though only operating the<br />
ones located in rooms that are occupied. The user can select which of the fancoils installed<br />
are to be activated, simply by turning individual units on or off, without ever having to<br />
adjust the water distribution circuit.<br />
It is possible to canalise the <strong>air</strong> delivery outwards by removing the grille for installation<br />
with free delivery.<br />
IDROBLOC C must be floor-mounted and has similar dimensions to those of a normal<br />
boiler for outside installation.<br />
IDROBLOC C is especially suitable for domestic use in new or renovated buildings.<br />
Compatibility of accessories<br />
IDROBLOC PR 1 PRD RA SDP VT7<br />
3C - 5C - 8C ✔ ✔ ✔ ✔ ✔<br />
Installation<br />
IDROBLOC C is quick and simple to install: simply position the unit, then make all water and electrical connections.<br />
The unit can be connected to any type of heating assembly: autonomous or centralised boiler, or district (remote) heating <strong>system</strong>s.<br />
No duct <strong>air</strong><br />
delivery<br />
Antifreeze electric heater for the storage tank<br />
(RA accessory)<br />
Adjustment and control fully electronic with<br />
microprocessor card<br />
Pre-arrangement for coupling with boiler,<br />
with immediate seasonal switching<br />
Hydraulic circuit complete with pump,<br />
expansion tank, storage tank, water filter,<br />
flow switch and safety valve<br />
Possibility of powering the fan coils of all the<br />
PRD1: Smart remote panel. Repeats at a<br />
distance the functions of the panel on the<br />
machine. Can be made remote with shielded<br />
cable up to 150 m.<br />
Ducted <strong>air</strong><br />
delivery<br />
environments, keeping in operation only<br />
those relative to rooms that are occupied<br />
Electric power used within the standard<br />
domestic availability limits<br />
Extreme simplicity of installation<br />
Metallic protective cabinet with rustproof<br />
polyester paint<br />
Color RAL 9002<br />
RA: Antifreeze electric heater for the storage<br />
tank. It must be factory-mounted.<br />
SDP: Electronic card for using PR3 accessory<br />
up to a distance of 150 m.<br />
VT7: Anti-vibration mounts.
Technical data<br />
IDROBLOC<br />
Cooling capacity kW<br />
Total input power* kW<br />
Input current* A<br />
Evaporator water flow rate l/h (nominal)<br />
Effective pressure kPa (max.)<br />
� Sound pressure dB (A)<br />
Total <strong>air</strong> flow rate (duct 900 mm)** m3 /h<br />
Pa<br />
Compressors<br />
n.<br />
type<br />
Peak current (compressor) A<br />
Storage tank capacity l<br />
Expansion tank capacity l<br />
Pump speed n.<br />
Water connections (female Gas)<br />
ø (installation)<br />
ø (heating)<br />
Power supply = 230V ~ 50Hz.<br />
Performance values refer to the following conditions:<br />
� Sound pressure measured in free field conditions at distance of 10 m<br />
and direction factor = 2.<br />
Cooling:<br />
- water outlet temperature 7 °C;<br />
- ambient <strong>air</strong> temperature 35 °C;<br />
- Δt = 5 °C.<br />
Dimensions (mm)<br />
A<br />
36<br />
C<br />
The technical data in this document are not binding.<br />
<strong>Aermec</strong> S.p.A. reserves the right to make whatever modifications<br />
it deems necessary to improve the product at any time.<br />
B<br />
* = including circulator pump power consumption<br />
** = with 900 mm channel without protection grille<br />
IDROBLOC 3C 5 C 8C<br />
Height A 1118 1118 1145<br />
Width B 606 606 710<br />
Depth C 572 572 590<br />
Weight Kg 110 128 144<br />
<strong>Aermec</strong> S.p.A.<br />
Via Roma, 996 - 37040 Bevilacqua (VR) - Italy<br />
Tel. +39 04 42 63 31 11 - Telefax +39 044 29 35 66<br />
www .aermec. com<br />
3 C 5 C 8 C<br />
3.5 6.8 8.2<br />
1.74 3.25 3.85<br />
8.2 14.8 19<br />
602 1170 1410<br />
66 58 52<br />
41 42 45<br />
1150 2500 3000<br />
Effective static pressure 20 50 50<br />
1 1 1<br />
Rotary Scroll Scroll<br />
33.5 75 103<br />
17 17 17<br />
2 2 2<br />
. 3 3 3<br />
3/4” F Gas 3/4” F Gas 3/4” F Gas<br />
1/2” F Gas 1/2” F Gas 1/2” F Gas<br />
Cod.: SIDBCUY.00 / 0709
Change language