3 Other operating modes of the G-18.mft - NRI

More documents

Recommendations

Info

GENERAL INFORMATION G-18.mft with vending machine control system To configure and test the coin validator reference is made to the separate documentation of the NRI PC software "WinEMP", of the NRI Palm handheld software "PalmEMP" and of the NRI testers (refer also to Chap. 9 "Which functions can be set using WinEMP/PalmEMP?"): • WinEMP – The configuration and diagnostics program for NRI coin validators, operating instructions for the G-18 • PalmEMP – Operating instructions for configuration of the coin validator G-18.mft • Tester G-19.0594/4 If this documentation is not available to you, it can be downloaded at any time from the NRI homepage (www.nri.de) in the compressed PDF format. General information about the coin validator The battery-operated and microcomputer-controlled electronic coin validator G-18.mft (multi-frequency technology) is the successor model of the G-18.2900, whose reliable measuring sensor system and rejection of false coins system were taken over and which has been designed in accordance with the BDTA standard (Bundesverband Deutscher Tabakwaren-Großhändler und Automatenaufsteller) (federal association of German tobacco product wholesalers and vending machine installers). Because of its printed circuit board, which is protected against moisture and high temperature variations, this is the ideal coin validator for power-supplyindependent vending machines in outdoor service use. To be able to react as quickly as possible to new false coins and to enable you to make your individual adjustments, this coin validator can be connected to (cp. also section "Accessories" in Chap. 10 "Technical data"): • a PC programming station, which consists of the configuration and diagnostics software "WinEMP" (including card reader and chip card) and an NRI tester. • a mobile Palm handheld, on which the NRI program "PalmEMP" has been installed, if the coin validator is to be configured on site in the vending machine. Old coins and new coins being added to a currency that have not been taken into consideration at the manufacturer can be programmed on the coin validator (optional teach mode). 8 National Rejectors, Inc. GmbH, Buxtehude
G-18.mft with vending machine control system GENERAL INFORMATION Advantages Scope of delivery • Low current consumption • Minimum operating voltage of less than 8 V • Operating reliability even under extreme environmental conditions such as minus temperatures and moisture • Acceptance speed of three coins per second • Multi-frequency technology for multiple scanning of inserted coins and for evaluation of 16 measuring parameters for reliable coin recognition • Quick reaction to changing market situations or to new false coins ensured by simplified configuration with the help of – the PC programming station "WinEMP" for the workshop – the Palm handheld software "PalmEMP" directly on the vending machine • 12 coin channels which can be inhibited individually • Integrated wake-up sensor • Optional MDB periphery • Optional teach mode for teaching up to six different tokens or coin types • Flash technology for uncomplicated and time-saving coin validator operating software updates In addition to the coin validator G-18.mft, the following items are delivered to you: • Additional control PCB for connecting the vending machine components such as the battery, escrow, selection buttons, pilot lights, product ejectors, and motorized return mechanism • 6-pole and 10-pole ribbon cable for connecting the additional control PCB to the coin validator National Rejectors, Inc. GmbH, Buxtehude 9
Page 1: Technical Documentation 01.06 GS/Bu
Page 4 and 5: TABLE OF CONTENTS G-18.mft with ven
Page 7: G-18.mft with vending machine contr
Page 11 and 12: G-18.mft with vending machine contr
Page 59 and 60:
G-18.mft with vending machine contr
show all

3 Other operating modes of the G-18.mft - NRI

Create successful ePaper yourself

Delete template?

Save as template?