3 Other operating modes of the G-18.mft - NRI

More documents

Recommendations

Info

INDEX G-18.mft with vending machine control system Switching block 16 definition 60 on additional control PCB 21 inhibit 36 set prices 31 test vending machine components 42 on coin validator dimensions 49 inhibit coins 34 select exact price/overpay 32 select memory block 36 Symbols in the text 7 T Teach coins 37 mode description 26 teach coins 37 Technical data 47 Temperature change 47 range 47 Test button 21 run, vending machine components 30 Tester, ordering code 52, 53 Text conventions 7 Tilt, mounting position 47 Tokens definition 60 teach 26, 37 Totalizer 12 Troubleshooting 43, 44 58 National Rejectors, Inc. GmbH, Buxtehude U Update firmware 53 Use, proper 10 V Validation area 15 Vending machine door, pin assignment 51 Very narrow coin channel 24 W WinEMP adjustable functions 46 connection 33 ordering code 52 WinFlash 53 www.nri.de 8
G-18.mft with vending machine control system GLOSSARY Glossary Acceptance band A range of acceptable measured values of one coin type with specific → coin properties defined by an upper and lower limit value. Block → Memory block Channel → Coin channel Coin acceptance band → Acceptance band Coin channel A coin channel or its → acceptance band serves the purpose of accepting → coin types with the same → coin properties. Various functions that describe how an accepted coin is further-processed (coin value, etc.) are assigned to a coin channel. Coin properties Coin properties which are measured when a coin is inserted into the coin validator. These are e.g. material, thickness, volume, minting, diameter, mass, hardness, etc. Coin type One coin type includes all coins for which the → coin properties agree. Data block download When updating a data block set (2 data blocks) using WinEMP or PalmEMP, the data blocks for the connected coin validator are loaded quickly and easily from the internal hard disk of your PC or from the Palm handheld into the coin validator. By doing this, a new data block is stored in → memory block 0 and memory block 1. The new data blocks contain different configurations of → coin channel data, e.g., current limit values of the → acceptance bands or other coin information. MDB Multi Drop Bus. The abbreviation defines a serial interface specification for an internal communication protocol for vending machines. You will find detailed information about the MDB interface in the "NAMA document MDB/ICP, 2.0" (www.vending.org). Memory block The coin validator can data-manage two independent coin configurations using two memory blocks. Twelve individual → coin channels are assigned each of these blocks. National Rejectors, Inc. GmbH, Buxtehude 59
Page 1:
Technical Documentation 01.06 GS/Bu
Page 4 and 5:
TABLE OF CONTENTS G-18.mft with ven
Page 7 and 8: G-18.mft with vending machine contr
Page 57: G-18.mft with vending machine contr
show all

3 Other operating modes of the G-18.mft - NRI

Create successful ePaper yourself

Delete template?

Save as template?