3 Other operating modes of the G-18.mft - NRI

G-18.mft with vending machine control system TECHNICAL DATA
10 Technical data
The G-18.mft is designed in accordance with the BDTA standard:
Supply voltage 9 V/12 V battery
Current consumption
U nom = 9 V Sleep mode: approx. 10 µA
Standby mode: approx. 40 mA (wake-up mode)
Coin acceptance: approx. 370 mA (for approx. 35 ms)
approx. 145 mA (for approx. 300 ms)
U nom = 12 V Sleep-Mode: approx. 13 µA
Standby-Mode: approx. 40 mA
Münzannahme: approx. 320 mA (for approx. 35 ms)
approx. 120 mA (for approx. 300 ms)
Temperature range -25 °C to 70 °C
Temperature change Max. 0.2 °C/min.
Rel. humidity Up to 93 %
Condensation Short, rare, and slight condensation permitted
Machine interface Aditional control PCB
for pin assignment see section "Pin assignment and
connection diagrams" in this chapter
Coin acceptance Max. 24 coin in 2 x 12 channels
Coin diameter: 29,5 mm (optionally up to 32.5 mm)
Coin thickness: 2,6 mm (optionally up to 3.5 mm)
Speed: 2 coins/sec.
Device dimensions Height: 185.7 mm
Width: 126.7 mm
Depth: 49.5 mm (57 mm with pressed return lever)
(all mounting dimensions according to BDTA standard,
see section "Mounting dimensions" in this chapter)
Mounting position Vertical, max. deviation: ± 2°
Mark of conformity CE (see next section)
National Rejectors, Inc. GmbH, Buxtehude
47