Kuhnke Electronics Instruction Manual

4.4.5 Direct Write of Local Outputs
Function Libraries
You can overwrite the current state of local outputs
without reference to the process image which is refreshed
automatically in a cyclic process.
Running function Flush_Outputs adapts the states of all
outputs to the states currently found in the process image.
The effect of this function is similar to that of KUBES
module WR_OUT
Prerequisite: Target and LZS version 02030207
Flush_Outputs:
Direct write of outputs (WR_OUT)
Example:
%QX0.0:=TRUE;
FLUSH_OUTPUTS();
81