Kuhnke Electronics Instruction Manual
Kuhnke Electronics Instruction Manual Kuhnke Electronics Instruction Manual
Function Libraries 4.2.1.2 Go Online Since the settings are project-specific, a project must be open before you can adapt them. � Choose Online�Login "Online" appears on CoDeSys' status line. Have you got communication problems, i.e. in case of "Create boot project" ? CoDeSys uses 2 adjustable timeouts for watching the communication. � Increase the timeout-value (in ms) in the CoDeSys.ini-file. C:\Programs\3S Software\CoDeSys V2.3\CoDeSys.INI [CoDeSys] DefaultWaitTime=2200 ; DownloadWaitTime=2200 DownloadWaitTime=5000 56 E 700 GB
4.2.2 CAN: Online CAN Function Libraries This section applies to Ventura Remote PLC CAN only. Programming directly via the CAN bus is the most practical approach whenever you wish to commission your system with a RS 232 terminal connected. You need a CAN converter for the PC used for programming (e.g. a CAN dongle provided by Peak) and you must adapt the CoDeSys programming system. Online CAN upon request only! Programming via CAN is subject to a couple of constraints. 57
- Page 5 and 6: Introduction 4.3.4 PLC Configuratio
- Page 7 and 8: Introduction 6.1.4 Station Address
- Page 9 and 10: 1 Introduction Introduction Ventura
- Page 11 and 12: 1.2 Variants Introduction Compact c
- Page 13 and 14: Advantages of Decentralisation Intr
- Page 15 and 16: 1.5 Network Examples 1.5.1 PROFIBUS
- Page 17 and 18: 2 Reliability, Safety 2.1 Intended
- Page 19 and 20: 2.4.3 Note Reliability, Safety This
- Page 21 and 22: 2.5.1 Project Planning and Installa
- Page 23 and 24: 2.6 Electromagnetic Compatibility 2
- Page 25 and 26: 2.6.6.2 Contamination Reliability,
- Page 27 and 28: 3 Hardware 3.1 System Description H
- Page 29 and 30: Hardware Extensions Ventura Remote
- Page 31 and 32: 3.3 Power Supply 3.3.1 Earth left s
- Page 33 and 34: 3.3.3 Power Supply Hardware Voltage
- Page 35 and 36: 3.4 Inputs and Outputs 3.4.1 Digita
- Page 37 and 38: 3.4.2 Digital Combi I/Os Hardware V
- Page 39 and 40: 3.4.3 Analogue Inputs Hardware Vent
- Page 41 and 42: 3.5 A, B, Ref Counter Hardware Vent
- Page 43 and 44: 3.6.2 PROFIBUS Hardware Ventura Rem
- Page 45 and 46: 3.7 Expansion Modules Ventura Remot
- Page 47 and 48: 3.8.2 Mode Selector mode selector H
- Page 49 and 50: 3.8.3.1 RUN 3.8.3.2 Stop 3.8.3.3 Ex
- Page 51 and 52: 3.9 Status and Failure Indication "
- Page 53 and 54: Installation 4 PLC Functions of Ven
- Page 55: 4.2 Writing CoDeSys Programs Online
- Page 59 and 60: 4.3.1 Operating System Function Lib
- Page 61 and 62: 4.3.3 Task Configuration 4.3.3.1 PL
- Page 63 and 64: 4.3.3.2 The Task Configurator 4.3.3
- Page 65 and 66: 4.3.4 PLC Configuration Function Li
- Page 67 and 68: Function Libraries DI16/DO16". Repe
- Page 69 and 70: 4.3.6 The Flash File System Functio
- Page 71 and 72: 4.4.1 Installing a Thread Function
- Page 73 and 74: Thread usage Function Libraries A t
- Page 75 and 76: 4.4.2 Installing / Uninstalling a T
- Page 77 and 78: To uninstall a timer task: Function
- Page 79 and 80: 4.4.3 Enabling / Disabling the Outp
- Page 81 and 82: 4.4.5 Direct Write of Local Outputs
- Page 83 and 84: FUNCTION INSTALL_ERROR_IRQ : BOOL V
- Page 85 and 86: Function Libraries INSTALL_INPUT_IR
- Page 87 and 88: 4.4.8 Installing a REF IRQ Module F
- Page 89 and 90: 4.4.10 Setting up the Watchdog Func
- Page 91 and 92: 4.5 Library MMC.LIB Function Librar
- Page 93 and 94: 4.5.2 Registering with the File Sys
- Page 95 and 96: 4.5.4 Copying Files Function Librar
- Page 97 and 98: 4.5.6 Determining the Free MMC Spac
- Page 99 and 100: 4.5.8 Moving a File Function Librar
- Page 101 and 102: 4.5.9 Opening a File Function Libra
- Page 103 and 104: 4.5.10 Reading from a File Function
- Page 105 and 106: 4.5.12 Setting the Edit Bookmark of
4.2.2 CAN: Online CAN<br />
Function Libraries<br />
This section applies to Ventura Remote PLC CAN only.<br />
Programming directly via the CAN bus is the most<br />
practical approach whenever you wish to commission<br />
your system with a RS 232 terminal connected. You need<br />
a CAN converter for the PC used for programming (e.g. a<br />
CAN dongle provided by Peak) and you must adapt the<br />
CoDeSys programming system.<br />
Online CAN upon request only!<br />
Programming via CAN is subject to a couple of<br />
constraints.<br />
57
Change language