Kuhnke Electronics Instruction Manual

5.3.5 Internal Analogue Input Functions
Ventura Remote PLC has:
- 4 analogue inputs ai0, ai1, ai2 and ai3
Software
� To set up the resolution of every analogue input and
to retrieve information about analogue input
variables, choose "Resources, PLC Configuration,
Kuhnke Ventura Remote IO CAN (or DP), Internal IO,
AI 4".
� Set the measuring range of every analogue input.
� Enable or disable the filter (for all analogue inputs).
� Analogue inputs read the analogue values of
temperatures, fill levels, speeds, etc. The processor
takes care of analogue-to-digital conversion. Digitized
values can be further processed by the user program.
Representation of analogue values:
The resolution is 10 bit. Values are shown as two's
complements in an integer-type variable.
139