Fuxx Control - ARS 2320 / ARS 2340 Instruction Manual - Kuhnke

More documents

Recommendations

Info

Fuxx Control ARS 2320 / ARS 2340 KUHNKE Automation 8.6 Connection: Motor [X6] and [X6A] 8.6.1 Configuration [X6] at the ARS 2320 � PHOENIX Phoenix Power-Combicon, 4-pin type, PC 4/4-G-7.62 8.6.2 Mating connector [X6] at the ARS 2320 � PHOENIX Phoenix Power-Combicon, 4-pin type, PC 4 HV/4-STF-7.62 8.6.3 Configuration [X6] at the ARS 2320 � PHOENIX Phoenix Power-Combicon-Plus, 4-pin type, PC 6/4-GF-10.16 8.6.4 Mating connector [X6] at the ARS 2320 � PHOENIX Phoenix Power-Combicon, 4-pin type, PC 6/4-STF-10.16 8.6.5 Configuration on the servo positioning controller [X6A] � PHOENIX Phoenix Mini-Combicon, 6-pin type, MC 1.5/6-STF-3.81 8.6.6 Mating connector [X6A] � PHOENIX Phoenix Mini-Combicon, 6-pin type, MC 1.5/6-GF-3.81 8.6.7 Pin assignment [X6] Table 32: Pin assignment [X6]: Motor Pin no. Name Value Specification 1 U 2 V 3 W 0...360 Veff 0..20 Aeff (ARS-560/20-M) 0..40 Aeff (ARS-560/40-M) 0...1000 Hz Connection of the three motor phases (with 3 rd harmonic) 4 PE - Connection of motor PE line 86 E 732 GB 14.12.2006
KUHNKE Automation Fuxx Control ARS 2320 / ARS 2340 The outer cable shield of the motor cable has to be connected flat to the mounting plate of the controller housing using shield terminal SK14. Table 33: Motor temperature monitoring system and holding brake [X6A] Pin no. Name Value Specification 1 MT+ +5 V / 5 mA 2 MT- GND Motor temperature sensor: Normally closed contact, normally open contact, PTC 3 PE - Shield of motor temperature monitoring system 4 PE - Shield of motor holding brake 5 BR+ 24 V brake, 2A max. 6 BR- 0 V brake Holding brake (motor), signal level depending on switching state, high-side / low-side switch 8.6.8 Type and configuration of cable [X6] and [X6A] at the ARS 2320 The cable names given refer to cables made by Lapp. They have proven to be reliable and are successfully used in many applications. However, it is also possible to use comparable cables from other manufacturers, e.g. Lütze or Helukabel. � LAPP KABEL ÖLFLEX-SERVO 700 CY; 4 G 4 + (2 x 0.75 + 2 x 1.0) StD-CY; ∅ 16.6 mm, with tinned CU shielding For highly flexible applications: � LAPP KABEL ÖLFLEX-SERVO-FD 755 CP; 4 G 4 + (2 x 0.75 StD) + (2 x 1.0 StD) CP; ∅ 16.9 mm, with tinned CU shielding for highly flexible use in drag chains 8.6.9 Type and configuration of cable [X6] and [X6A] at the ARS 2340 The cable names given refer to cables made by Lapp. They have proven to be reliable and are successfully used in many applications. However, it is also possible to use comparable cables from other manufacturers, e.g. Lütze or Helukabel. � LAPP KABEL ÖLFLEX-SERVO 700 CY; 4 G 6 + (2 x 0.75 + 2 x 1.0) StD-CY; ∅ 17.7 mm, with tinned CU shielding E 732 GB 87 14.12.2006
Page 1 and 2:
KUHNKE Electronics Instruction Manu
Page 3 and 4:
KUHNKE Automation Fuxx Control ARS
Page 5 and 6:
Page 7 and 8:
Page 9 and 10:
Page 11 and 12:
Page 13 and 14:
Page 15 and 16:
Page 17 and 18:
Page 19 and 20:
Page 21 and 22:
Page 23 and 24:
Page 25 and 26:
Page 27 and 28:
Page 29 and 30:
Page 31 and 32:
Page 33 and 34:
Page 35 and 36: KUHNKE Automation Fuxx Control ARS
Page 85: KUHNKE Automation Fuxx Control ARS
Page 137 and 138:
Page 139 and 140:
Page 141 and 142:
Page 143 and 144:
Page 145 and 146:
show all

Fuxx Control - ARS 2320 / ARS 2340 Instruction Manual - Kuhnke

Create successful ePaper yourself

Delete template?

Save as template?