Fuxx Control - ARS 2320 / ARS 2340 Instruction Manual - Kuhnke

KUHNKE Automation Fuxx Control ARS 2320 / ARS 2340
8.14 Notes concerning safe and EMC-compliant
installation
8.14.1 Definitions and terminology
Electromagnetic compatibility (EMC) or electromagnetic interference (EMI) includes the following
requirements:
� Sufficient immunity of an electrical installation or an electrical device against external electrical,
magnetic or electromagnetic interferences via cables or the environment.
� Sufficiently small unwanted emission of electrical, magnetic or electromagnetic interference of
an electrical installation or an electrical device to other devices in the vicinity via cables or through
the environment.
8.14.2 General information concerning EMC
The interference emission and interference immunity of a servo drive controller always depend on the
overall drive concept consisting of the following components:
� Power supply
� Servo drive controller
� Motor
� Electromechanical system
� Configuration and type of wiring
� Superimposed control system
To increase interference immunity and to decrease interference emissions, the ARS 2300 servo
positioning controller comes supplied with output chokes and mains filters so that it can be used in
most applications without additional external filter measures.
ARS 2300 servo positioning controllers are certified in accordance with product standard
EN 61800-3 for electrical drives.
In most cases no external filter measures are required (see below).
The declaration of conformity for the EMC directive 89/336/EEC is available from the
manufacturer.
Warning!
This product can cause high-frequency interference in residential areas, which could
require measures for radio interference suppression.
E 732 GB 109
14.12.2006