Ventura IPC Instruction Manual pdf - Kuhnke
Ventura IPC Instruction Manual pdf - Kuhnke Ventura IPC Instruction Manual pdf - Kuhnke
Hardware KUHNKE Automation 3.2 Ventura IPC + System Description 3.3 Application A scalable price and performance also means to only use the Ventura IPC building blocks you really need for a given application. Ventura IPC + is a variant with an integrated slot PLC. Actually, it consists of two separate components built into the same housing and communicating via a dual-port RAM. Although the slot PLC resides in the same housing, it still has its own power supply and, to give extra safety to the system, the deterministic control process is entirely independent from the "Ventura IPC host PC". For further information on the slot PLC inside Ventura IPC +, please read instruction manual E 697 GB "Ventura SlotPLC, PLC, PROFIBUS-DP and CANopen Master" Ventura IPC installs on a top-hat rail to provide a scalable, PC-based control platform for switching cabinets or terminal boxes. With this range of products you get a powerful and flexible industry PC system for a wide range of practical applications, specifically in the fields of mechanical engineering and switching cabinet construction: • open and closed loop control using standardised software tools for all areas of mechanical engineering • operation and visualisation with the display terminal taken down for use in automatic machines and info terminals • a single unit for the visualisation and real-time control of generalpurpose machine systems 14 E 674 GB 07.03.2007
KUHNKE Automation Hardware 3.4 Technical Properties Ventura IPC 300 Ventura IPC 700 Ventura IPC 800/1000 Design Cabinet-mounted IPC Cabinet-mounted IPC Cabinet-mounted IPC Installation Universal rail or with screws Universal rail or with screws Cooling Passive Passive Passive Processor Controls Status indication by LEDs 266 MHz Geode Reset button on front panel Run, Stop, Error (PLC), HDD, Bus (CANopen), DVI, USB Main memory Min. 128 Mbyte SD-RAM 733 MHz Celeron® Reset button on front panel Run, Stop, Error (PLC), HDD, Bus (CANopen), DVI, USB Min. 128 Mbyte SD- RAM Integrated screw plate adapter 800 MHz / 1.0 GHz Celeron® M Reset button on front panel Run, Stop, Error (PLC), HDD, Bus (CANopen), DVI, USB Min. 256 Mbyte DDR-Ram NV-RAM 32 kbyte 32 kbyte 32 kbyte Working memory size Max. 512 Mbyte Max. 512 Mbyte Max. 1024 Mbyte Compact flash card Ethernet Type I, boot-enabled, 1x at front, 1x at back 2x 10/100 Base-T RJ-45 jack Type I, boot-enabled, 1x at front, 1x at back 2x 10/100 Base-T RJ-45 jack Type I, boot-enabled, 1x at front, 1x at back 2x 10/100 Base-T RJ-45 jack USB 2x USB 1.1 2x USB 2.0 2x USB 2.0 Serial interface, 2x COM 2x COM 2x COM Graphics adapter DVI / VGA (combined) DVI / VGA (combined) DVI / VGA (combined) Resolution (DVI) Max. 1024 x 768 Max. 1024 x 768 Max. 1024 x 768 Resolution (VGA) Max. 1024 x 768 Max. 1280x1024 Max. 2048x1536 Keyboard/mouse PS/2 PS/2 PS/2 CANopen Max. 1 Mbps Max. 1 Mbpss Max. 1 Mbpss Supply voltage 24 VDC -15%+20% 24 VDC -15%+20% 24 VDC -15%+20% Ambient temperature 0 ... 50 °C 0 ... 50 °C 0 ... 50 °C Housing made of Stainless steel/aluminium Stainless steel/aluminium Stainless steel/aluminium Protection IP20 IP20 IP20 Dimensions (HxWxD) 222 x 63 x 141mm 222 x 81 x 141 mm incl. heat sink 222 x 69 x 135 mm incl. heat sink E 674 GB 15 07.03.2007
- Page 1 and 2: Kuhnke Electronics Instruction Manu
- Page 3 and 4: KUHNKE Automation Table of Contents
- Page 5 and 6: KUHNKE Automation Table of Contents
- Page 7 and 8: 1 Introduction Performance in a nut
- Page 9 and 10: KUHNKE Automation Reliability, Safe
- Page 11 and 12: KUHNKE Automation Reliability, Safe
- Page 13: KUHNKE Automation Hardware 3 Ventur
- Page 17 and 18: KUHNKE Automation Hardware 3.6 Phys
- Page 19 and 20: KUHNKE Automation Hardware 3.7.4 Gr
- Page 21 and 22: KUHNKE Automation Hardware 3.7.7 Et
- Page 23 and 24: KUHNKE Automation Hardware 3.9 Stor
- Page 25 and 26: KUHNKE Automation Hardware 3.11 Ext
- Page 27 and 28: KUHNKE Automation Hardware 3.12.4 F
- Page 29 and 30: KUHNKE Automation Hardware 3.13 Ven
- Page 31 and 32: KUHNKE Automation Hardware 4 Instal
- Page 33 and 34: KUHNKE Automation Software 5 Start-
- Page 35 and 36: KUHNKE Automation Software Windows
- Page 37 and 38: KUHNKE Automation Software 6.1 Comp
- Page 39 and 40: KUHNKE Automation Software 6.2.3 OP
- Page 41 and 42: KUHNKE Automation Software 6.3.3 Ul
- Page 43 and 44: KUHNKE Automation Software 6.5 Vent
- Page 45 and 46: KUHNKE Automation Software 7.1.2 Co
- Page 47 and 48: KUHNKE Automation Software 7.1.5 OP
- Page 49 and 50: KUHNKE Automation Software • Deve
- Page 51 and 52: KUHNKE Automation Software This com
- Page 53 and 54: KUHNKE Automation Software Sometime
- Page 55 and 56: KUHNKE Automation Software 7.5 Conn
- Page 57 and 58: KUHNKE Automation Software 7.5.2 Et
- Page 59 and 60: KUHNKE Automation Software • Star
- Page 61 and 62: KUHNKE Automation Software 9 Mainte
- Page 63 and 64: KUHNKE Automation Appendix 10 Appen
KUHNKE Automation Hardware<br />
3.4 Technical Properties<br />
<strong>Ventura</strong> <strong>IPC</strong> 300 <strong>Ventura</strong> <strong>IPC</strong> 700 <strong>Ventura</strong> <strong>IPC</strong> 800/1000<br />
Design Cabinet-mounted <strong>IPC</strong> Cabinet-mounted <strong>IPC</strong> Cabinet-mounted <strong>IPC</strong><br />
Installation<br />
Universal rail or with<br />
screws<br />
Universal rail or with<br />
screws<br />
Cooling Passive Passive Passive<br />
Processor<br />
Controls<br />
Status indication by LEDs<br />
266 MHz<br />
Geode<br />
Reset button on front<br />
panel<br />
Run,<br />
Stop,<br />
Error (PLC),<br />
HDD,<br />
Bus (CANopen),<br />
DVI,<br />
USB<br />
Main memory Min. 128 Mbyte SD-RAM<br />
733 MHz<br />
Celeron®<br />
Reset button on front<br />
panel<br />
Run,<br />
Stop,<br />
Error (PLC),<br />
HDD,<br />
Bus (CANopen),<br />
DVI,<br />
USB<br />
Min. 128 Mbyte SD-<br />
RAM<br />
Integrated screw plate<br />
adapter<br />
800 MHz / 1.0 GHz<br />
Celeron® M<br />
Reset button on front panel<br />
Run,<br />
Stop,<br />
Error (PLC),<br />
HDD,<br />
Bus (CANopen),<br />
DVI,<br />
USB<br />
Min. 256 Mbyte DDR-Ram<br />
NV-RAM 32 kbyte 32 kbyte 32 kbyte<br />
Working memory size Max. 512 Mbyte Max. 512 Mbyte Max. 1024 Mbyte<br />
Compact flash card<br />
Ethernet<br />
Type I, boot-enabled,<br />
1x at front,<br />
1x at back<br />
2x 10/100 Base-T<br />
RJ-45 jack<br />
Type I, boot-enabled,<br />
1x at front,<br />
1x at back<br />
2x 10/100 Base-T<br />
RJ-45 jack<br />
Type I, boot-enabled,<br />
1x at front,<br />
1x at back<br />
2x 10/100 Base-T<br />
RJ-45 jack<br />
USB 2x USB 1.1 2x USB 2.0 2x USB 2.0<br />
Serial interface, 2x COM 2x COM 2x COM<br />
Graphics adapter DVI / VGA (combined) DVI / VGA (combined) DVI / VGA (combined)<br />
Resolution (DVI) Max. 1024 x 768 Max. 1024 x 768 Max. 1024 x 768<br />
Resolution (VGA) Max. 1024 x 768 Max. 1280x1024 Max. 2048x1536<br />
Keyboard/mouse PS/2 PS/2 PS/2<br />
CANopen Max. 1 Mbps Max. 1 Mbpss Max. 1 Mbpss<br />
Supply voltage 24 VDC -15%+20% 24 VDC -15%+20% 24 VDC -15%+20%<br />
Ambient temperature 0 ... 50 °C 0 ... 50 °C 0 ... 50 °C<br />
Housing made of Stainless steel/aluminium Stainless<br />
steel/aluminium<br />
Stainless steel/aluminium<br />
Protection IP20 IP20 IP20<br />
Dimensions (HxWxD) 222 x 63 x 141mm<br />
222 x 81 x 141 mm incl.<br />
heat sink<br />
222 x 69 x 135 mm incl.<br />
heat sink<br />
E 674 GB 15<br />
07.03.2007
Change language