TEGOSOFT TN_e - Quetzal Quimica
TEGOSOFT TN_e - Quetzal Quimica TEGOSOFT TN_e - Quetzal Quimica
TEGOSOFT ® TN Emollient ester that easily solves lipophilic active ingredients • Solvent for oil soluble UV filters • Especially suitable for sun care and skin care products • Gives a pleasant, non-oily skin feel • Low viscosity Goldschmidt Personal Care Page 1 of 4
- Page 2 and 3: INCI Name (CTFA Name) C12-15 Alkyl
- Page 4: O/W Cream F 84/96 Phase A TEGO ® C
<strong>TEGOSOFT</strong> ® <strong>TN</strong><br />
Emollient ester that easily solves<br />
lipophilic active ingredients<br />
• Solvent for oil soluble UV filters<br />
• Especially suitable for sun care and<br />
skin care products<br />
• Gives a pleasant, non-oily skin feel<br />
• Low viscosity<br />
Goldschmidt Personal Care<br />
Page 1 of 4
INCI Name (CTFA Name)<br />
C12-15 Alkyl Benzoate<br />
Chemical and physical properties<br />
(not part of specifications)<br />
Form liquid<br />
Colour clear<br />
Further product information<br />
(not part of specifications)<br />
Density (g/cm³) approx. 0.92<br />
Viscosity at 25 °C<br />
according to Höppler<br />
(mPas)<br />
Surface tension at<br />
25 °C according to<br />
ring method (mN/m)<br />
approx. 12<br />
approx. 32<br />
Spreadability low spreading<br />
Polarity very high polarity<br />
Pour point following<br />
DIN ISO 3016 (°C)<br />
approx. -6<br />
Maximum solubility of UV filters in<br />
<strong>TEGOSOFT</strong> ® <strong>TN</strong> [%]<br />
Benzophenone-3 15<br />
4-Methylbenzylidene<br />
Camphor<br />
Butyl Methoxydibenzoylmethane<br />
30<br />
16<br />
Properties<br />
• Very high polarity with low viscosity<br />
• Solvent for oil soluble UV filters<br />
• Dispersing agent for pigments and bentones<br />
• Extender for perfume oils<br />
• Gives a pleasant, non-oily skin feel<br />
• Non-comedogenic<br />
Application<br />
<strong>TEGOSOFT</strong> ® <strong>TN</strong> is especially suitable for<br />
• Sun care creams, lotions, oils<br />
• Skin care preparations<br />
• Antiperspirants<br />
• Decorative cosmetics<br />
• Bath oils<br />
• Conditioning shampoos<br />
Packaging<br />
4 x 200 kg drum<br />
Hazardous goods classification<br />
Information concerning<br />
− classification and labelling according to<br />
regulations for transport and for dangerous<br />
substances<br />
− protective measures for storage and<br />
handling<br />
− measures in accidents and fires<br />
− toxicity and ecological effects<br />
is given in our material safety data sheets.<br />
Page 2 of 4
Guide Line Formulations<br />
W/O Sun Protection Lotion<br />
Ma 83/98<br />
Phase A<br />
ISOLAN ® PDI 3.0 %<br />
Beeswax 0.2 %<br />
Hydrogenated Castor Oil 0.3 %<br />
Ethylhexyl Methoxycinnamate 4.0 %<br />
Butyl Methoxydibenzoylmethane 2.0 %<br />
<strong>TEGOSOFT</strong> ® <strong>TN</strong> 9.0 %<br />
<strong>TEGOSOFT</strong> ® CT 8.5 %<br />
<strong>TEGOSOFT</strong> ® MM 1.0 %<br />
Phase B<br />
Glycerin 3.0 %<br />
Magnesium Sulfate Heptahydrate 0.6 %<br />
Water 68.4 %<br />
Preservative, perfume q. s.<br />
Preparation:<br />
Charge with phase A and heat to<br />
approx. 80 °C.<br />
1. Add phase B (80 °C or room temperature)<br />
slowly with stirring.<br />
2. Homogenise for a short time.<br />
3. Cool with gentle stirring and homogenise again<br />
below 30 °C.<br />
O/W Skin Protecting Sun Care Lotion<br />
(Cold Processing)<br />
Ma 1/00-1<br />
Phase A<br />
ABIL ® Care 85 2.0 %<br />
<strong>TEGOSOFT</strong> ® <strong>TN</strong> 3.0 %<br />
<strong>TEGOSOFT</strong> ® DC 2.0 %<br />
<strong>TEGOSOFT</strong> ® P 0.4 %<br />
Avocado Oil 1.0 %<br />
4-Methylbenzylidene Camphor 3.0 %<br />
Ethylhexyl Methoxycinnamate 2.5 %<br />
Isoamyl p-Methoxycinnamate 2.5 %<br />
Butyl Methoxydibenzoylmethane 2.0 %<br />
Tocopheryl Acetate 0.5 %<br />
Phase B<br />
TEGO ® SMO 80 V 0.2 %<br />
Glycerin 2.0 %<br />
EDTA 0.1 %<br />
GluCare ® S 0.1 %<br />
Water 75.9 %<br />
Phase C<br />
TEGO ® Carbomer 140 0.15 %<br />
TEGO ® Carbomer 141 0.15 %<br />
Xanthan Gum 0.1 %<br />
<strong>TEGOSOFT</strong> ® P 1.6 %<br />
Phase D<br />
Sodium Hydroxide (10 % in water) 0.8 %<br />
Preservative, Perfume q.s.<br />
Preparation:<br />
1. Add phase A to B with stirring.<br />
2. Homogenize.<br />
3. Add Phase C and homogenize for a short time.<br />
4. Add phase D and stir well.<br />
Page 3 of 4
O/W Cream<br />
F 84/96<br />
Phase A<br />
TEGO ® Care 450 3.0 %<br />
TEGIN ® M 2.0 %<br />
TEGO ® Alkanol 18 1.0 %<br />
<strong>TEGOSOFT</strong> ® liquid 10.0 %<br />
<strong>TEGOSOFT</strong> ® P 7.5 %<br />
<strong>TEGOSOFT</strong> ® <strong>TN</strong> 4.5 %<br />
Ethylhexyl Methoxycinnamate 2.0 %<br />
Tocopheryl Acetate 0.5 %<br />
Phase B<br />
Glycerin 3.0 %<br />
Water 65.0 %<br />
Phase C<br />
TEGO ® Carbomer 134 0.2 %<br />
<strong>TEGOSOFT</strong> ® P 0.8 %<br />
Phase D<br />
Sodium Hydroxide (10 % solution) 0.5 %<br />
Perfume, preservative q.s.<br />
Preparation:<br />
1. Charge with phase B and heat to<br />
approx. 70 °C.*<br />
2. Heat phase A to approx. 70 °C and add to<br />
phase B with stirring.<br />
3. Homogenise.<br />
4. Cool with gentle stirring, add phase C at<br />
approx. 60 °C phase C and homogenise again.<br />
5. Add phase D at approx. 40 °C.<br />
*Important information: If it is charged with phase<br />
A, phase B must be added to phase A without<br />
stirring.<br />
After Shave Lotion<br />
Alcohol (40 % vol.) 97.0 %<br />
<strong>TEGOSOFT</strong> ® <strong>TN</strong> 3.0 %<br />
Fragrance, preservative q.s.<br />
Preparation:<br />
Dissolve preservative in alcohol.<br />
Dissolve fragrance in <strong>TEGOSOFT</strong> ® <strong>TN</strong>, add to<br />
afore-mentioned solution in small portions with<br />
constant agitation.<br />
Conditioning shampoo<br />
Sodium Laureth Sulfate (28 %) 30.0 %<br />
Rewopol ® SB CS 50 5.0 %<br />
Rewoderm ® LIS 80 3.0 %<br />
<strong>TEGOSOFT</strong> ® <strong>TN</strong> 0.8 %<br />
Water 61.2 %<br />
Fragrance, preservative q.s.<br />
Citric Acid q.s.<br />
Sodium Chloride q.s.<br />
Preparation:<br />
1. Dissolve the components in order by stirring<br />
at approx. 30 °C.<br />
2. Adjust the pH with citric acid.<br />
3. Adjust the required viscosity with sodium<br />
chloride.<br />
Bath Oil, dispersing<br />
Mineral Oil 65.0 %<br />
<strong>TEGOSOFT</strong> ® <strong>TN</strong> 20.0 %<br />
Acylated Lanolin 5.0 %<br />
PEG-8 Dilaurate 5.0 %<br />
Fragrance 5.0 %<br />
Preparation:<br />
Dissolve the components in the given order at<br />
approximately 30 °C by stirring.<br />
A 03/00<br />
Page 4 of 4