PVA Specialities - Kuraray Europe GmbH

- PVA Specialities -
Viscosity 1) Hydrolysis Volatile Max. Ash Max. 2)
Modified Grade [mPa·s] [mol-%] [%] [%]
Kuraray POVAL LM-10HD 4.5 - 5.7 3) 38 - 42 98.5 ± 1.5 n.a.
LM-20 3 - 4 3) 38 - 42 98.5 ± 1.5 1.0
LM-22 3 - 4 3) 47 - 53 98.5 ± 1.5 n.a.
LM-25 3 - 4 3) 33 - 38 98.5 ± 1.5 n.a.
Kuraray POVAL PVA-L-10 5 - 7 71.5 - 73.5 97.5 ± 2.5 1.0
PVA-L-508 5 - 7 71 - 73 97.5 ± 2.5 0.2
PVA-L-8 5 - 5.8 69.5 - 72.5 97.5 ± 2.5 1.0
PVA-L-9 5,5 - 6,5 69.5 - 72.5 97.5 ± 2.5 1.0
PVA-L-9-78 5.5 - 7 76.5 - 79 97.5 ± 2.5 1.0
Kuaray Stab LP SM 007 G1.5 5.0 - 7.0
LP SM 010 G2 3.4 - 4.0
Kuraray POVAL KL-318 20 - 30 85 - 90 97.5 ± 2.5 n.a.
KL-506 5.2 - 6.2 74 - 80 97.5 ± 2.5 n.a.
Kuraray POVAL R-1130 20 - 30 98 - 99 97.5 ± 2.5 0.5
Exceval AQ-4104 3.8 - 4.5 98 - 99 97.5 ± 2.5 0.4
HR-3010 12 - 16 99 - 99.4 97.5 ± 2.5 0.4
RS-2117 23 - 30 97.5 - 99 97.5 ± 2.5 0.4
RS-2817 23 - 30 95.5 - 97.5 97.5 ± 2.5 0.7
RS-1713 15.5 - 21 92 - 94 97.5 ± 2.5 0.7
RS-1717 23 - 30 92 - 94 97.5 ± 2.5 0.4
Kuraray POVAL PVA-217E 20 - 26 87 - 89 97.5 ± 2.5 0.4
PVA-217EE 20 - 26 87 - 89 97.5 ± 2.5 0.4
PVA-220E 27 - 35 87 - 89 97.5 ± 2.5 0.4
PVA-224E 40 - 50 87 - 89 97.5 ± 2.5 0.4
Kuraray Poval SD-1000 2.4 - 3,4 83 - 88
1) of a 4% aqueous solution at 20 °C determined by Brookfield synchronised-motor rotary-type viscometer
2) calculated as Na 2O
3) of a 4% solution (50% methanol / 50% H 2O) at 20 °C
4) of a 4% aqueous solution at 20 °C determined by Höppler-viscometer (DIN 53015)
2011_01

- PVA Specialities -
Melting
Temp.
Glass
Transition
Temp.
watersoluble Grade 190 °C 230 °C [°C] [°C]
Mowiflex TC 232 24.0 - 40.0 178 35
Mowiflex LP TC 161 1.5 - 2.5 191 n.d.
TC 251 13.0 - 19.0 159 30
TC 253 14.0 - 20.0 163 62
TC 661 3.5 - 4.5 182 n.d.
1) of a 8% aquaeous solution at 20% determined by Höppler-viscometer
Melt Flow Rate
[g/10 min], 21.6 kg
This information is based on our present state of knowledge and is intendend to
provide general notes on our products on their uses. It should therefor not be
construed as guaranteeing specific properties of the products described or their
suitability for a particular application. Any existing industrial property rights must be
observed. The quality of our products is subject to our General Condition of Sale.
Melt Flow Rate
[g/10 min], 2.16 kg
Kuraray Europe GmbH
Division PVA-PVB
D-65926 Frankfurt am Main
contact details are available under
2011_01