Terminal block labelling - Kablo Etiketi

Component and
component location labelling
BS type
-40 to +140 °C
PVC
V0
For subsequent inscription of control gear or component location.
The BS 9/10 label holder is secured by means of a self-clamping
(spring-loaded) base.
BS 3 BS 1 / BS 2 / BS 4 BS 9
Type Order no. Application Core cross For No. of Printable No. of No. Software Pack
range from - to section label idents area characters/ per sheet type qty.
mm from - to mm² plate BK23/BK30 mm lines
Clamping piece with top part to hold paper strips for lengthways inscription
(Supplied with paper strips)
BS 1 86281010 max. 3.7 0.5-2.5 —- —- 27x8 10 / 2 250 BSM 500
Paper sheet DIN A4 for BS 1
Paper sheet 86281013 —- —- —- —- 25x8 10 / 2 250 BSM 250
Clamping piece with top part to hold idents BK or KS 4/x
BS 2 86281014 max. 3.7 0.5-2.5 KS 4.../DM 4... 11 / 9 27x4 12 / 1 —- —- 500
Clamping piece for KM 7 and BS 5
BS 3 86281016 max. 3.7 0.5-2.5 —- —- —- —- —- —- 190
Clamping piece with top part for ACS plotter marking
BS 4 86281018 max. 3.7 0.5-2.5 27x12 —- 27x12 12 / 3 —- 79 190
BS 4 requires no base plate
Label holder (self-clamping)
Matching label holder KM 6/18 or KSS 20x9
BS 9 86281024 max. 5.2 —- —- —- —- —- —- —- 50
BS 10 86281026 max. 11.0 —- —- —- —- —- —- —- 50
Murrplastik Systemtechnik GmbH Postfach 1143 D-71567 Oppenweiler A +49 (0 ) 71 91/4 82-0 E +49 (0 ) 71 91/4 82-2 80 www.murrplastik.de info@murrplastik.de 95