Terminal block labelling - Kablo Etiketi

The history of labelling
Since the requirement for labelling
electrical components and wiring
began, there has been a continuous
and changing demand for costeffective,
time-saving and flexible
methods of manufacture (while systems
have become more and more
complex), challenging the makers
of labelling systems to keep coming
up with new and innovative ideas.
Information
Some years ago Murrplastik
Systemtechnik GmbH developed a
fast and simple labelling system
for identifying machines and components.
The labelling system is
based on pre-printed ident inserts
(with individual letters, numbers
and symbols) and various sleeves
and holders into which the idents
can be inserted. With this method
of labelling few components are
required to achieve rapid, clean
and durable results. The secret of
the low component requirement
lies with the invariable typeface
on pre-printed label lettering for
which a large number of different
holders has been created. Already
in 1986, Murrplastik enhanced
the existing system by computer-
4 Murrplastik Systemtechnik GmbH Postfach 1143 D-71567 Oppenweiler A +49 (0 ) 71 91/4 82-0 E +49 (0 ) 71 91/4 82-2 80 www.murrplastik.de info@murrplastik.de