Terminal block labelling - Kablo Etiketi

Label plate KS (single-line/divisible)
-40 to +140 °C
PC
V0
Single-line inscription
Use in electrical systems and
installations of all kinds
Single wire, cable, and
conduit labelling
High-quality, halogen-free, divisible label plate.
The label plate KS 4/x is used with sleeves KT, KTH, KTHQ or holders
KM, KMH, KMHQ or KTN on wires, cables, lines or conduits.
The label plate is available in various colours.
The divisible part of the KS 4/18-12 is used as a record of the necessary
connection data. The label plate KS 4/30-70 can be cut to lengths in
steps of 10 mm if required for labels longer than 30 mm.
Type Order no. Colour RAL Label Printable No. of No. of No. Software Pack
equiv. size area characters/ trees per type qty.
mm mm lines frame
Label length 18 mm
KS 4/18-12 86361048 White 9016 Part length 4x18 4x18 10 / 1 1 34 15A 1020
4x12 4x12 6 / 1
KS 4/18-12 86361050 Yellow 1018 Part length 4x18 4x18 10 / 1 1 34 16A 1020
4x12 4x12 6 / 1
KS 4/18-12 86361054 Green 6018 Part length 4x18 4x18 10 / 1 1 34 18A 1020
4x12 4x12 6 / 1
KS 4/18-12 86361052 Red 2012 Part length 4x18 4x18 10 / 1 1 34 17A 1020
4x12 4x12 6 / 1
Label length 30/40/50/60/70 mm
� KS 4/30-70 86361070 White 9016 4x70 4x70 38 / 1 1 18 1U 324
Part length 4x60 4x60 33 / 1 1U1
4x10 4x10 5 / 1
Part length 4x50 4x50 27 / 1 1U2
4x20 4x20 11 / 1
Part length 4x40 4x40 22 / 1 1U3
4x30 4x30 16 / 1
Part length 4x30 4x30 16 / 1 1U4
4x40 4x40 22 / 1
For matching base plates see plotter system accessories
32 Murrplastik Systemtechnik GmbH Postfach 1143 D-71567 Oppenweiler A +49 (0 ) 71 91/4 82-0 E +49 (0 ) 71 91/4 82-2 80 www.murrplastik.de info@murrplastik.de