Terminal block labelling - Kablo Etiketi

Single wire, cable, and
conduit labelling
Label holder KMH/Q (halogen-free / high packing density)
-40 to +160 °C
TPU
V0
Halogen-free
Use in electrical systems and
installations of all kinds
High-quality, halogen-free, two-part label sleeve for the most exacting
requirements in the labelling of wires, cables and conduits.
It holds the idents (BK) and the ACS labels type KS 4... or DM 4...
The holder is fastened by means of a cable tie.
It matches the appearance of label sleeve KTH/Q.
Type Order no. Length For No. of Cable tie Recommended Pack
mm label idents max. width min. diameter qty.
plate BK23/BK30 mm mm
Labelling lengthways along the cable/conduit
Single-line
KMH/Q 4/23 86223610 23 KS 4/x; DM 4... 10/7 5 5 1000
KMH/Q 4/30 86223612 30 KS 4/x; DM 4... 13/10 5 5 1000
For correct size of cable tie see accessories
Lengthways labelling
Murrplastik Systemtechnik GmbH Postfach 1143 D-71567 Oppenweiler A +49 (0 ) 71 91/4 82-0 E +49 (0 ) 71 91/4 82-2 80 www.murrplastik.de info@murrplastik.de 25