Terminal block labelling - Kablo Etiketi

More documents

Recommendations

Info

Label sleeves KTH/Q (halogen-free / high packing density) -40 to +160 °C TPU V0 Special test conforming to EN 50155 and 61373 - VDE 0155 Part 106 Use in electrical systems and installations of all kinds Single wire, cable, and conduit <strong>labelling</strong> High-quality, halogen-free two-part label sleeve for extreme demands. The geometry of the sleeve only causes a minimum increase in diameter of the cable. The trapezoidal design makes for rapid and simple installation. It holds the idents (BK) and the ACS labels type KS 4... or DM 4... 11 versions are available covering the entire core cross section range from 0.14 mm² to 240 mm² ab. The sleeves come in different lengths. Type Order no. Application range Core cross section * For No. of Pack from - to from - to label idents qty. mm mm² plate BK23/BK30 Sleeve length 12 mm KTH/Q 0/12 86222808 0.8-1.5 0.14-0.25 KS 4/12; DM 4... 5/4 2000 KTH/Q 1/12 86222810 1.5-2.3 0.25-0.5 KS 4/12; DM 4... 5/4 2000 KTH/Q 1.5/12 86222811 1.6-3.2 0.25-1.5 KS 4/12; DM 4... 5/4 2000 KTH/Q 2/12 86222812 2.2-4.5 0.5-4.0 KS 4/12; DM 4... 5/4 2000 KTH/Q 3/12 86222814 3.7-6.2 2.5-6.0 KS 4/12; DM 4... 5/4 1000 KTH/Q 4/12 86222816 4.8-7.5 6.0-16.0 KS 4/12; DM 4... 5/4 1000 KTH/Q 5/12 86222818 8-12 16.0-35.0 KS 4/12; DM 4... 5/4 500 KTH/Q 6/12 86222820 10-14 35.0-50.0 KS 4/12; DM 4... 5/4 500 KTH/Q 6.5/12 86222821 12-18 50.0-95.0 KS 4/12; DM 4... 5/4 500 KTH/Q 7/12 86222822 18-24 95.0-150.0 KS 4/12; DM 4... 5/4 250 KTH/Q 8/12 86222824 23-30 150.0-240.0 KS 4/12; DM 4... 5/4 250 Sleeve length 18 mm KTH/Q 0/18 86223008 0.8-1.5 0.14-0.25 KS 4/18; DM 4... 7/6 2000 KTH/Q 1/18 86223010 1.5-2.3 0.25-0.5 KS 4/18; DM 4... 7/6 2000 KTH/Q 1.5/18 86223011 1.6-3.2 0.25-1.5 KS 4/18; DM 4... 7/6 2000 KTH/Q 2/18 86223012 2.2-4.5 0.5-4.0 KS 4/18; DM 4... 7/6 2000 KTH/Q 3/18 86223014 3.7-6.2 2.5-6.0 KS 4/18; DM 4... 7/6 1000 KTH/Q 4/18 86223016 4.8-7.5 6.0-16.0 KS 4/18; DM 4... 7/6 1000 KTH/Q 5/18 86223018 8-12 16.0-35.0 KS 4/18; DM 4... 7/6 500 KTH/Q 6/18 86223020 10-14 35.0-50.0 KS 4/18; DM 4... 7/6 500 KTH/Q 6.5/18 86223021 12-18 50.0-95.0 KS 4/18; DM 4... 7/6 500 KTH/Q 7/18 86223022 18-24 95.0-150.0 KS 4/18; DM 4... 7/6 250 KTH/Q 8/18 86223024 23-30 150.0-240.0 KS 4/18; DM 4... 7/6 250 20 Murrplastik Systemtechnik GmbH Postfach 1143 D-71567 Oppenweiler A +49 (0 ) 71 91/4 82-0 E +49 (0 ) 71 91/4 82-2 80 www.murrplastik.de info@murrplastik.de
Single wire, cable, and conduit <strong>labelling</strong> Label sleeves KTH/Q (halogen-free / high packing density) Type Order no. Application range Core cross section * For No. of Pack from - to from - to label idents qty. mm mm² plate BK23/BK30 Sleeve length 23 mm KTH/Q 0/23 86223208 0.8-1.5 0.14-0.25 KS 4/23; DM 4... 10/7 2000 KTH/Q 1/23 86223210 1.5-2.3 0.25-0.5 KS 4/23; DM 4... 10/7 2000 KTH/Q 1.5/23 86223211 1.6-3.2 0.25-1.5 KS 4/23; DM 4... 10/7 2000 KTH/Q 2/23 86223212 2.2-4.5 0.5-4.0 KS 4/23; DM 4... 10/7 2000 KTH/Q 3/23 86223214 3.7-6.2 2.5-6.0 KS 4/23; DM 4... 10/7 1000 KTH/Q 4/23 86223216 4.8-7.5 6.0-16.0 KS 4/23; DM 4... 10/7 1000 KTH/Q 5/23 86223218 8-12 16.0-35.0 KS 4/23; DM 4... 10/7 500 KTH/Q 6/23 86223220 10-14 35.0-50.0 KS 4/23; DM 4... 10/7 500 KTH/Q 6.5/23 86223221 12-18 50.0-95.0 KS 4/23; DM 4... 10/7 500 KTH/Q 7/23 86223222 18-24 95.0-150.0 KS 4/23; DM 4... 10/7 250 KTH/Q 8/23 86223224 23-30 150.0-240.0 KS 4/23; DM 4... 10/7 250 Sleeve length 30 mm KTH/Q 0/30 86223408 0.8-1.5 0.14-0.25 KS 4/30; DM 4... 13/10 2000 KTH/Q 1/30 86223410 1.5-2.3 0.25-0.5 KS 4/30; DM 4... 13/10 2000 KTH/Q 1.5/30 86223411 1.6-3.2 0.25-1.5 KS 4/30; DM 4... 13/10 2000 KTH/Q 2/30 86223412 2.2-4.5 0.5-4.0 KS 4/30; DM 4... 13/10 2000 KTH/Q 3/30 86223414 3.7-6.2 2.5-6.0 KS 4/30; DM 4... 13/10 1000 KTH/Q 4/30 86223416 4.8-7.5 6.0-16.0 KS 4/30; DM 4... 13/10 1000 KTH/Q 5/30 86223418 8-12 16.0-35.0 KS 4/30; DM 4... 13/10 500 KTH/Q 6/30 86223420 10-14 35.0-50.0 KS 4/30; DM 4... 13/10 500 KTH/Q 6.5/30 86223421 12-18 50.0-95.0 KS 4/30; DM 4... 13/10 500 KTH/Q 7/30 86223422 18-24 95.0-150.0 KS 4/30; DM 4... 13/10 500 KTH/Q 8/30 86223424 23-30 150.0-240.0 KS 4/30; DM 4... 13/10 250 Sleeve length 30 mm released KTH/Q 1/30A 86223482 1.5-2.3 0.25-0.5 KS 4/30; DM 4... 13/10 2000 KTH/Q 2/30A 86223484 2.2-4.5 0.5-4.0 KS 4/30; DM 4... 13/10 2000 KTH/Q 3/30A 86223486 3.7-5.9 2.5-6.0 KS 4/30; DM 4... 13/10 1000 Supplied by the metre in rolls on request * Single wire, type H05V-K or H07V-K Murrplastik Systemtechnik GmbH Postfach 1143 D-71567 Oppenweiler A +49 (0 ) 71 91/4 82-0 E +49 (0 ) 71 91/4 82-2 80 www.murrplastik.de info@murrplastik.de 21
Page 1 and 2: LABELLING SYSTEMS 2005 / 2006 Murrp
Page 3 and 4: Contents Introduction to the labell
Page 5 and 6: aided labelling software and hardwa
Page 7 and 8: End: What can be labelled Labelling
Page 9 and 10: Photograph: Courtesy of ABB Flexibl
Page 11 and 12: SINGLE WIRE, CABLE AND CONDUIT LABE
Page 13 and 14: Multi-line Halogenfree HB / VO 76 K
Page 15 and 16: 10.0 2/0 11.0 BS 10 3/0 12.0 KTH/Q
Page 17 and 18: Single wire, cable, and conduit lab
Page 19: Single wire, cable, and conduit lab
Page 43 and 44: TERMINAL BLOCK LABELLING Murrplasti
Page 45 and 46: Terminal block labelling Terminal b
Page 57 and 58: Terminal block labelling KET type (
Page 59 and 60: Terminal block labelling KMR type (
Page 61 and 62: Terminal block labelling KPX type (
Page 63 and 64: Terminal block labelling KWI type (
Page 65 and 66: Terminal block labelling TK type (A
Page 71 and 72:
COMPONENT AND COMPONENT LOCATION LA
Page 73 and 74:
Component and component location la
Page 75 and 76:
Page 77 and 78:
Page 79 and 80:
Page 81 and 82:
Page 83 and 84:
Page 85 and 86:
Page 87 and 88:
Page 89 and 90:
Page 91 and 92:
Page 93 and 94:
Page 95 and 96:
Page 97 and 98:
Page 99 and 100:
Page 101 and 102:
Page 103 and 104:
Page 105 and 106:
Page 107 and 108:
Page 109 and 110:
Page 111 and 112:
LABELLING OF PUSH-BUTTONS AND SIGNA
Page 113 and 114:
Labelling of push-buttons and signa
Page 115 and 116:
Page 117 and 118:
Page 119 and 120:
Page 121 and 122:
Page 123 and 124:
SYSTEM LABELLING Murrplastik System
Page 125 and 126:
System labelling DM label plate Tem
Page 127 and 128:
SOFTWARE Murrplastik Systemtechnik
Page 129 and 130:
Software ACS Professional software
Page 131 and 132:
Software ACS Professional software
Page 133 and 134:
OVERVIEW OF OUTPUT SYSTEMS Murrplas
Page 135 and 136:
MVPS-G3-XXL Fields of application T
Page 137 and 138:
Output systems Printing system Labe
Page 139 and 140:
PLOTTER SYSTEMS Murrplastik Systemt
Page 141 and 142:
Plotter system MVPS-G3-T plotter sy
Page 143 and 144:
Plotter system Porty P300 and acces
Page 145 and 146:
PLOTTER SYSTEMS ACCESSORIES Murrpla
Page 147 and 148:
Plotter system accessories Base pla
Page 149 and 150:
Plotter system accessories Ink, cle
Page 151 and 152:
THERMAL TRANSFER PRINTER AND ACCESS
Page 153 and 154:
ENGRAVING SYSTEMS Murrplastik Syste
Page 155 and 156:
Engraving systems CAM engraving mac
Page 157 and 158:
ENGRAVING SYSTEMS ACCESSORIES Murrp
Page 159 and 160:
Engraving systems accessories CAM e
Page 161 and 162:
Page 163 and 164:
Page 165 and 166:
Engraving systems accessories DMG l
Page 167 and 168:
ACCESSORIES Murrplastik Systemtechn
Page 169 and 170:
Accessories ACS function tool Multi
Page 171 and 172:
Accessories KB / KKB / KBM cable ti
Page 173 and 174:
Accessories SH screwed holder -40 t
Page 175 and 176:
Accessories Cable tie rail KBL -40
Page 177 and 178:
LABELLING AND FITTING SERVICE DL Mu
Page 179 and 180:
We inscribe label plates, sheet lab
Page 181 and 182:
MATERIAL PROPERTIES Murrplastik Sys
Page 183 and 184:
Tensile Tear Bonding Solubil- Prope
Page 185 and 186:
Material properties Tests and test
Page 187 and 188:
Product range Cable entry and cable
Page 189 and 190:
Worldwide Hong Kong Worldtex & Co.
Page 191 and 192:
Notes Murrplastik Systemtechnik Gmb
Page 193 and 194:
Notes Murrplastik Systemtechnik Gmb
Page 195 and 196:
All information concerning the chem
Page 197 and 198:
Temperature range Material Fire cla
show all

Terminal block labelling - Kablo Etiketi

Create successful ePaper yourself

Delete template?

Save as template?