Terminal block labelling - Kablo Etiketi

Label sleeves KTH/Q (halogen-free / high packing density)
-40 to +160 °C
TPU
V0
Special test conforming to EN 50155
and 61373 - VDE 0155 Part 106
Use in electrical systems and
installations of all kinds
Single wire, cable, and
conduit labelling
High-quality, halogen-free two-part label sleeve for extreme demands.
The geometry of the sleeve only causes a minimum increase in diameter
of the cable. The trapezoidal design makes for rapid and simple installation.
It holds the idents (BK) and the ACS labels type KS 4... or DM 4...
11 versions are available covering the entire core cross section range
from 0.14 mm² to 240 mm² ab.
The sleeves come in different lengths.
Type Order no. Application range Core cross section * For No. of Pack
from - to from - to label idents qty.
mm mm² plate BK23/BK30
Sleeve length 12 mm
KTH/Q 0/12 86222808 0.8-1.5 0.14-0.25 KS 4/12; DM 4... 5/4 2000
KTH/Q 1/12 86222810 1.5-2.3 0.25-0.5 KS 4/12; DM 4... 5/4 2000
KTH/Q 1.5/12 86222811 1.6-3.2 0.25-1.5 KS 4/12; DM 4... 5/4 2000
KTH/Q 2/12 86222812 2.2-4.5 0.5-4.0 KS 4/12; DM 4... 5/4 2000
KTH/Q 3/12 86222814 3.7-6.2 2.5-6.0 KS 4/12; DM 4... 5/4 1000
KTH/Q 4/12 86222816 4.8-7.5 6.0-16.0 KS 4/12; DM 4... 5/4 1000
KTH/Q 5/12 86222818 8-12 16.0-35.0 KS 4/12; DM 4... 5/4 500
KTH/Q 6/12 86222820 10-14 35.0-50.0 KS 4/12; DM 4... 5/4 500
KTH/Q 6.5/12 86222821 12-18 50.0-95.0 KS 4/12; DM 4... 5/4 500
KTH/Q 7/12 86222822 18-24 95.0-150.0 KS 4/12; DM 4... 5/4 250
KTH/Q 8/12 86222824 23-30 150.0-240.0 KS 4/12; DM 4... 5/4 250
Sleeve length 18 mm
KTH/Q 0/18 86223008 0.8-1.5 0.14-0.25 KS 4/18; DM 4... 7/6 2000
KTH/Q 1/18 86223010 1.5-2.3 0.25-0.5 KS 4/18; DM 4... 7/6 2000
KTH/Q 1.5/18 86223011 1.6-3.2 0.25-1.5 KS 4/18; DM 4... 7/6 2000
KTH/Q 2/18 86223012 2.2-4.5 0.5-4.0 KS 4/18; DM 4... 7/6 2000
KTH/Q 3/18 86223014 3.7-6.2 2.5-6.0 KS 4/18; DM 4... 7/6 1000
KTH/Q 4/18 86223016 4.8-7.5 6.0-16.0 KS 4/18; DM 4... 7/6 1000
KTH/Q 5/18 86223018 8-12 16.0-35.0 KS 4/18; DM 4... 7/6 500
KTH/Q 6/18 86223020 10-14 35.0-50.0 KS 4/18; DM 4... 7/6 500
KTH/Q 6.5/18 86223021 12-18 50.0-95.0 KS 4/18; DM 4... 7/6 500
KTH/Q 7/18 86223022 18-24 95.0-150.0 KS 4/18; DM 4... 7/6 250
KTH/Q 8/18 86223024 23-30 150.0-240.0 KS 4/18; DM 4... 7/6 250
20 Murrplastik Systemtechnik GmbH Postfach 1143 D-71567 Oppenweiler A +49 (0 ) 71 91/4 82-0 E +49 (0 ) 71 91/4 82-2 80 www.murrplastik.de info@murrplastik.de