Terminal block labelling - Kablo Etiketi
Terminal block labelling - Kablo Etiketi
Terminal block labelling - Kablo Etiketi
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Labelling systems and their properties<br />
Material properties<br />
Approvals Material Thermal Fire Lab examstability<br />
classification ination<br />
Sleeves, general Automotive, transport, rail, gen.<br />
mech. engineering, chemistry, energy,<br />
wood, foodstuffs, textiles, machine<br />
tools, transfer, building technologies,<br />
control technology, shipbuilding<br />
KT + KM PVC Up to 60 °C V0 i.a.w. UL94 Slight pitting<br />
KTH + KMH EVA Up to 80 °C HB i.a.w. UL 94<br />
KTH/Q TPU Up to 140 °C V0 i.a.w. UL94 OK<br />
KTN TPE Up to 100 °C HB i.a.w. UL 94<br />
ACS labels<br />
ACS label plate, PC Up to 140 °C V0 i.a.w. UL94 OK<br />
general<br />
KPX 6/10PA, KMR PA PA Up to 140 °C V2 i.a.w. UL94<br />
Holder<br />
BZS label rail PVC Up to 80 °C V0 i.a.w. UL94 Slight pitting<br />
Accessories PA Up to 125 °C V0 i.a.w. UL94<br />
BT/BTK label holder Hard PVC Up to 80 °C V0 i.a.w. UL94 Slight pitting<br />
Duomatt / Alumatt<br />
Duomatt plates Acrylate butadiene 70-80 °C<br />
copolymer<br />
Alumatt Aluminium Up to 200 °C<br />
Sheet labels<br />
ELG / ELW / ELO / ES / ESL Polyester film -40 °C to 150 °C constant V0 i.a.w. UL94<br />
min. processing temp. 5 °C<br />
EDG Reinforced textile -0 °C to 80 °C<br />
Adhesive<br />
KSK label plate adhesive Acrylate A-30 -40 °C to 150 °C constant MIL-P-19834 B, Amend<br />
transient + 200 °C 1type1, UL approved<br />
processing temperature (MH-11410), meets AGA<br />
18 °C to 30 °C and CSA requirements<br />
BZS label rail adhesive (4930) Polyacrylate max. 93 °C, transient 149 °C<br />
mixed with adhesive resin min. processing temp. 10 °C<br />
BTK label holder adhesive (4965) Polyacrylate max. 93 °C, transient 149 °C<br />
mixed with adhesive resin min. processing temp. 10 °C<br />
Duomatt adhesive 467 Acrylate A-30 -40 °C to 150 °C constant MIL-P-19834 B, Amend<br />
transient + 200 °C, 1type1, UL approved<br />
processing temperature (MH-11410), meets AGA<br />
18 °C to 30 °C and CSA requirements<br />
Duomatt adhesive SK 1780 Polyethylene foam -40 °C to 150 °C constant<br />
processing temperature<br />
10 °C to 80 °C<br />
182 Murrplastik Systemtechnik GmbH Postfach 1143 D-71567 Oppenweiler A +49 (0 ) 71 91/4 82-0 E +49 (0 ) 71 91/4 82-2 80 www.murrplastik.de info@murrplastik.de