Terminal block labelling - Kablo Etiketi

MVPS-G3 plotter system
The all-rounder of labelling systems.
The MVPS-G3 is a new labelling system capable of writing with speed,
reliability and quality on all labelling materials used to identify and mark
electrical, pneumatic and mechanical components. The ACS software
can be relied upon to transmit the data accurately in all kinds of systems.
The MVPS-G3 plotter was developed in response to customer requirements.
As such, it combines the following capabilities designed to make
operations significantly easier.
Type Order no. Pack
qty.
MVPS-G3 86622010 1
Technical data
Plotter type: Flatbed plotter
Plotting area: max. 450 mm x 300 mm
Plotting speed: max. 40 cm/s
Pen station: max. 4 pens with double sealing
Ports: Parallel (Centronics), USB Level 1.1
Size: 660x440x125 mm
Weight: approx. 8 kg
Power unit: Input voltage: 100-240 V AC 50-60 Hz
Power unit: Input current: 0.3 A max. at 220 V~
Drive: Two-phase stepping motor
Included in delivery: 1 parallel connecting cable,
1 power unit and 1 manual
Plotter system
For the inscription of ACS label plates, sheet labels and engraving materials
the corresponding base plates/retaining plates are required.
Advantages at a glance:
- Top-quality typeface from the first
to the last label
- Pen station prevents pens from
drying out
- High configuration capacity - up
to 1200 labels
- For mobile and stationary use
- Short set-up times for various
materials
- Part plotting of materials possible
140 Murrplastik Systemtechnik GmbH Postfach 1143 D-71567 Oppenweiler A +49 (0 ) 71 91/4 82-0 E +49 (0 ) 71 91/4 82-2 80 www.murrplastik.de info@murrplastik.de