Terminal block labelling - Kablo Etiketi

Component and
component location labelling
ALU label plate
-40 to +800 °C
Aluminium
Single-line and multi-line inscription
Use in electrical systems and installations
of all kinds
Anodised aluminium for engraving.
Articles bearing the ALU designation are specifically for use on engraving
machines.
Mats (300 x 200 mm) are consecutively populated with label plates.
They are secured by means of a vacuum table.
We recommend using our cooling lubricant during engraving
(see engraving systems accessories).
Type Order no. Base colour / Label Printable No. of No. of No. Software Pack
fill colour size area characters/ trees per type qty.
mm mm lines mat labels
Right-angled corners, adhesive foil, thickness 1.0 mm
ALU 40x15 86505483 Anodised silver / silver 40x15m 40x15 23 / 3 7 91 483 1
SI MS 1.0
ALU 55x20 86505481 Anodised silver / silver 55x20m 55x20 31 / 3 5 50 481 1
SI MS 1.0
Rounded corners, adhesive foil, thickness 1.0, 2x 2.2 mm hole
ALU 30x15 86505361 Anodised silver / silver 30x15 20x15 12 / 3 10 130 361 1
SI R MS 1.0 2x2.2
ALU 30x15 86505466 Anodised black / silver 30x15 20x15 12 / 3 10 130 466 1
SW R MS 1.0 2x2.2
Right-angled corners, adhesive foil, thickness 1.0, 2x 2.5 mm hole
ALU 40x15 86505484 Anodised silver / silver 40x15m 34x15 19 / 3 7 91 484 1
SI MS 1.0 2x2.5
ALU 55x20 86505482 Anodised silver / silver 55x20m 47x15 26 / 3 5 50 482 1
SI MS 1.0 2x2.5
Rounded corners, adhesive foil, thickness 1.0, 2x 2.5 mm hole
ALU 30x8 86505485 Anodised silver / silver 30x15 20x15 12 / 3 10 130 485 1
SI R MS 1.0 2x2.5
Rounded corners, adhesive foil, thickness 1.0, 2x 4.0 mm hole
ALU 30x15 86505463 Anodised black / silver 30x15 20x15 12 / 3 10 130 463 1
SW R MS 1.0 2x4.0
ALU 30x15 86505362 Anodised silver / silver 30x15 20x15 12 / 3 10 130 362 1
SI R MS 1.0 2x4.0
Murrplastik Systemtechnik GmbH Postfach 1143 D-71567 Oppenweiler A +49 (0 ) 71 91/4 82-0 E +49 (0 ) 71 91/4 82-2 80 www.murrplastik.de info@murrplastik.de 109