Slat blinds - Sunon
Slat blinds - Sunon
Slat blinds - Sunon
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>Slat</strong> <strong>blinds</strong> GM 200/100, MV 90, VR 70/90, KR 59/80, EC 70/100, RE 50<br />
The classically elegant
2<br />
Products Technical information<br />
4/5 All-metal blindGM 200<br />
6/7 GM 100 all-metal <strong>blinds</strong><br />
8/9 Metal compact reefing blindMV 90<br />
10 / 11 Compact Venetian <strong>blinds</strong> VR 70 and VR 90<br />
12 / 13 Compact Venetian <strong>blinds</strong> VR 70 LO and VR 90 LO<br />
14 / 15 Convex reefing <strong>blinds</strong> KR 59 and KR 80<br />
16 / 17 Economy reefing <strong>blinds</strong> EC 70 and EC 100<br />
20 Colour selection<br />
23 GM 200<br />
24 GM 100<br />
25 MV 90<br />
26 VR 70 andVR 90<br />
26 VR 70 LO andVR 90 LO<br />
27 KR 59 andKR 80<br />
18/ 19 RE 50 Venetian <strong>blinds</strong> 29 RE 50<br />
28 EC 70 andEC 100<br />
29 Information for professionals
Residential building, Hägendorf<br />
For all architectural possibilities<br />
<strong>Slat</strong> <strong>blinds</strong> are as diverse as the architecture in which they are used. They are adjustable in every position, from vertical<br />
to horizontal, and thereby guarantee optimal room lighting – or even complete darkening. Every blind is available with<br />
manual or motor drive, and are also available with an electronic controller. At Schenker Blinds, you will not only find<br />
the optimal product, but also comprehensive advice and a fast service – one of our 36 locations throughout Switzerland<br />
is sure to be in your vicinity!<br />
Product selection, quality and service<br />
3
More protection with security<br />
4<br />
The GM 200 all-metal blind<br />
The GM 200 unites all the best features of the all-metal blind and shows what is technically feasible nowadays. In addition<br />
to the high demands on security, their modern, slightly rounded slat shape also corresponds to the aesthetic wishes of<br />
architects and building owners. They fit in everywhere where increased security is required, for example in detached houses,<br />
ground-floor apartments or business and administration buildings. The locking mechanism integrated into the lateral<br />
guide rails makes life difficult for burglars. The lifting and tilting mechanisms are also located in the lateral guide rails.<br />
If something is standing under the all-metal blind as it is moving down, the overrun protection fitted into the blind as<br />
product protection will prevent any damage taking place.<br />
Detachedhouse, Hünibach, GM 200
What makes them unique<br />
– Stable, robust all-metal blind<br />
– All mechanically stressedparts are<br />
manufacturedfrom corrosion-free<br />
metals<br />
– No lifting tapes in the slat area<br />
– Intrusion protection through the efficient<br />
locking function in every position<br />
– Goodinsulation anddarkening<br />
properties<br />
– Individually adjustable slat inclination<br />
– Overrun protection that prevents<br />
damage to the blind<br />
– The slat shape has been specially<br />
designed for resistance to buckling<br />
Constructive highlights<br />
– Roll-formedslats (0.6 mm thick,<br />
90 mm wide) with noise-suppressing<br />
inserts<br />
– <strong>Slat</strong>s supported in metal holders on<br />
both sides andsecuredwith stainless<br />
steel clips<br />
– <strong>Slat</strong>s can be replaced individually<br />
from the inside<br />
– End rail and guides made from<br />
extruded aluminium, clear anodised,<br />
available powder-coated or colour<br />
anodised at extra charge<br />
– Guides with noise-suppressing plastic<br />
inserts<br />
– A solid, maintenance-free roller chain<br />
is usedin the lifting mechanism<br />
– The tilting mechanism is made up of<br />
stainless steel folding segments that<br />
are integrated into the guides<br />
Option<br />
– Extruded slats, 1.1 mm thick,<br />
90 mm wide<br />
– Low-noise closing of the slats thanks<br />
to shapedfelt strips<br />
Colours on request: For an additional<br />
charge, the slat clips and the slat holders<br />
are also available with a colour<br />
coating. This also applies to the lateral<br />
guide rails andendrails.<br />
Colours on request: For an extra<br />
charge, the slats clips andthe slat<br />
supports can be given a colour coating.<br />
This also applies to the lateral guide<br />
rails andendrails.<br />
Drive<br />
– Manual or motor drive: also available<br />
with an electronic controller on<br />
request<br />
Flexible application<br />
– Depending on the requirements for<br />
use, the slats of the GM 200 can be<br />
loweredin the inclination variants<br />
Working Position «A», andthe Basic<br />
Setting «G».<br />
– The inclination «A» lowers the slats in<br />
their angledposition of 37° for permanent,<br />
optimal incident light. With the<br />
inclination «G», the slats are lowered<br />
in the almost closedposition of 70°.<br />
This makes an immediate room darkening<br />
possible.<br />
GM 200<br />
• For apartments, private houses,<br />
business and administration<br />
buildings<br />
• When increased security is<br />
required<br />
• Good insulation and high level<br />
of darkening<br />
• Very wind-stable<br />
5
Automatically the highest level of security<br />
6<br />
GM 100 all-metal <strong>blinds</strong><br />
The GM 100 is the only forced-drive all-metal blind on the market. Its unique technology ensures that it will be automatically<br />
locked in every position and at every slat inclination, thereby offering you the greatest possible security. Thanks to the rotating<br />
roller chain in the lateral guides, the GM 100 can be set to any angle of inclination, and is therefore suitable for vertical and hori-<br />
zontal applications in detached houses, ground-floor apartments, and commercial and administrative buildings. Its precise<br />
mechanism ensures the highest level of operational reliability, while the stable slats that have been designed for maximum buck-<br />
ling resistance can withstand maximum wind speeds.<br />
Professional Training Centre, Zofingen, GM 100
What makes them unique<br />
– Forced-drive all-metal blind<br />
– Suitable for vertical andhorizontal<br />
applications<br />
– All mechanically stressedparts are<br />
manufacturedfrom corrosion-free<br />
metals<br />
– Locking function in every position<br />
andin every slat position<br />
– No lifting tapes in the slat area<br />
– Special slat shape design to<br />
guarantee buckling resistance<br />
– Optimum slat closure<br />
– High operational reliability<br />
– Excellent wind-resisting strength<br />
Constructive highlights<br />
– Roll-formedslats (0.6 mm thick,<br />
90 mm wide) with noise-reduction<br />
profile<br />
– End rails and guides made from extruded<br />
aluminium, clear anodised,<br />
with powder coating or coloured<br />
anodising available at extra cost<br />
– Three-part guide to ensure access to<br />
the mechanical elements<br />
– Rotating roller chain<br />
– The rocker andlocking elements that<br />
are necessary for tilting the slats are<br />
built into the lateral guides<br />
– The guided scissor chain stabilises the<br />
slats in any position<br />
– Dust-protected, maintenance. free<br />
gearbox thanks to sealedhousing and<br />
permanent lubrication<br />
Stable slats: High buckling resistance<br />
slat shape design with extruded noisesuppression<br />
profile.<br />
Unique mechanical system: The guide<br />
with rotating roller chain and guided<br />
scissor chain ensures that the blindis<br />
lockedin any position.<br />
Drive<br />
Manual or motor drive; also available<br />
with an electronic controller on request.<br />
Flexible application<br />
The GM 100 can be set to any angle of<br />
inclination: Regardless of whether vertical,<br />
horizontal, or running from the bottom<br />
to the top, the blindwill function in<br />
any installation position.<br />
GM 100<br />
• For all types of buildings<br />
• Unique blind, also suitable for<br />
horizontal applications<br />
• Complies with high security<br />
requirements<br />
• Outstanding windstability<br />
7
Active locking mechanism<br />
8<br />
MV 90 metal compact reefing blind<br />
The MV 90 metal compact reefing blind is effective when it comes to security. Because uninvited guests will not find<br />
things easy, thanks to its active locking mechanism and the special slat guides. The MV 90 is robust, service-friendly<br />
and stands out through its architecturally high quality design. It also ensures the maximum operational reliability<br />
and a perfect light comfort.<br />
Detachedhouse in Gretzenbach, MV 90
What makes them unique<br />
– Various slat positions for the optimal<br />
room illumination and optimal darkening<br />
– <strong>Slat</strong>s with noise andlight attenuation<br />
profiles<br />
– Optimal slat closure thanks to the<br />
special shape of the slats<br />
– UV-stabilised polyamide guide bolts<br />
for low-noise running with a holding<br />
device for a smooth slat guidance<br />
– Optimum efficiency andhigh service<br />
life thanks to the robust, well-proven<br />
design<br />
– Modular design for cost-effective<br />
maintenance<br />
– End rail shape with tapered underside<br />
for good sealing to any window sill,<br />
with identical dimensions for all blind<br />
widths<br />
– Wide area of application: detached<br />
houses and residential buildings,<br />
administration and public buildings<br />
such as schools andhospitals, and<br />
commercial premises<br />
Constructive highlights<br />
– Security against break-in through the<br />
efficient locking in every position<br />
– Locking mechanism protectedin the<br />
lateral guide by means of maintenance-free,<br />
steel-reinforcedtoothedbelt<br />
– Stable, 90 mm wide slats flanged on<br />
both sides<br />
– <strong>Slat</strong>s with a thickness of 0.45 mm<br />
– Mounting strap made from dirt-repelling,<br />
age-resistant polyester<br />
Precise slat closure: The special,<br />
heavily overlapping slat profile of the<br />
MV 90 ensures a precise slat closure<br />
that has hitherto been unattainable.<br />
Maximum darkening, noise reduction<br />
andgoodinsulation are thereby<br />
ensured.<br />
Optimal connection: The patented<br />
connection between the slat andthe<br />
mounting strap is carriedout using<br />
a stainless steel eye, which is inserted<br />
in to the flange without weakening<br />
the slat.<br />
– Overrun protection that prevents<br />
damage to the blind<br />
Drive<br />
– Manual or motor drive: also available<br />
with an electronic controller on<br />
request<br />
Flexible application<br />
– As the MV 90 andVR 90 have similar<br />
slat shapes, they can be easily combinedin<br />
the case of a conversion or<br />
renovation project.<br />
– For all ground-floor windows, we<br />
wouldrecommendthe MV 90 with its<br />
efficient locking in every position.<br />
MV 90<br />
• For all types of buildings<br />
• For increased security<br />
• Outstanding noise reduction<br />
• Very good darkening<br />
9
The beautiful side of functionality<br />
10<br />
VR 70 and VR 90 compact Venetian <strong>blinds</strong><br />
The compact Venetian <strong>blinds</strong> of the VR 70 and VR 90 series prove that functionally mature objects can also have a<br />
beautiful side. Thanks to the special shape of their slats, they are outstandingly suitable everywhere where good<br />
darkening is required. The slat position can be freely adjusted according to your needs. The different model versions<br />
fulfil all the requirements.<br />
Detached house in Ehrendingen, VR 90
What makes them unique<br />
– Optimum price-performance ratio<br />
– Wide area of application, for example<br />
for administration buildings, schools,<br />
housing estates, retirement homes,<br />
hospitals anddetachedhouses and<br />
residential buildings<br />
– Absolute operational reliability thanks<br />
to the simple andeffortless operation<br />
– Different slat positions for the optimum<br />
room illumination andexcellent<br />
darkening of living rooms and workrooms<br />
– Continuous regulation of the internal<br />
brightness possible<br />
– Special slat shape for beautifying the<br />
façade appearance and for the darkening<br />
of the rooms<br />
Constructive highlights<br />
– Elegant slat profile for architecturally<br />
aesthetic façade areas<br />
– Guides with extruded, UV-stabilised<br />
noise-reduction profiles for low-noise<br />
operation<br />
– Outstanding insulation characteristics<br />
for the reduction of energy costs<br />
– Stable, 70 and 90 mm wide slats<br />
flanged on both sides with noise<br />
andlight attenuation profiles<br />
– <strong>Slat</strong>s with a thickness of 0.42 mm<br />
– All major mechanical components<br />
can be replacedon-site.<br />
Option<br />
– Cord guidance on the VR 90<br />
Insect protection roller blind ISR: <strong>Slat</strong><br />
blindandinsect protection combined<br />
with a space-saving combined guide<br />
system.<br />
Cord guidance: The optionally available<br />
cord guidance of the VR 90 opens up a<br />
wide range of architectural possibilities<br />
for the design of the façade.<br />
Drive<br />
– Manual or motor drive: also available<br />
with an electronic controller on<br />
request<br />
Flexible application<br />
– VR 90 with similar slat shape to the<br />
MV 90. For conversions andrenovations,<br />
the <strong>blinds</strong> can be easily<br />
combined.<br />
– The slats are also available perforated(hole<br />
proportion 5%, hole<br />
size 0.8 mm)<br />
– <strong>Slat</strong> blindandinsect protection combinedobtainable<br />
with a space-saving<br />
combined guide system.<br />
VR 70 and VR 90<br />
• High-flyer under the slat <strong>blinds</strong><br />
• Simple to operate<br />
• Service-friendly<br />
• VR 70 as space saver<br />
11
The ideal <strong>blinds</strong> for working<br />
12<br />
VR 70 LO and VR 90 LO compact Venetian <strong>blinds</strong><br />
«LO» stands for Daylight Optimisation. In order to avoid annoying reflections, for example on computer screens, the<br />
LO technique provides as much shadow as is necessary and as much light as possible. In order to achieve this effect,<br />
the slats do not close uniformly: towards the bottom of the blind, the opening between the slats become continually<br />
narrower, and continually wider towards the top.<br />
ABB, Baden, VR 70 LO
What makes them unique<br />
– Daylight optimised <strong>blinds</strong> are mainly<br />
usedin business, school andadministration<br />
buildings<br />
– Increase the feeling of well-being<br />
at the workplace<br />
– Thanks to the optimal use of the<br />
sources of light, energy can be saved,<br />
because artificial light will then only<br />
be used when the daylight is no<br />
longer sufficient<br />
– Daylight optimisation with comfortable<br />
luminance distribution over the<br />
complete room<br />
– Continuous stepless transition of the<br />
slat positions<br />
Constructive highlights<br />
– The openings of the slats become<br />
continually wider towards the top<br />
– Energy saving through daylight<br />
optimisation andreducedair<br />
conditioning<br />
– Mounting strap made from dirtrepellant,<br />
age-resistant polyester<br />
Drive<br />
– Manual or motor drive: also available<br />
with an electronic controller on<br />
request<br />
Sun protection with see-through<br />
capability: The perforatedslats make<br />
it possible to observe the outside world,<br />
even when the <strong>blinds</strong> are lowered and<br />
closed.<br />
Daylight optimisation: Optimal light<br />
yieldwithout annoying reflections<br />
thanks to the unevenly opening slats:<br />
narrower towards the bottom, wider<br />
towards the top.<br />
Flexible application<br />
– The slats are also available perforated(hole<br />
proportion 5%, hole<br />
size 0.8 mm)<br />
– <strong>Slat</strong> blindandinsect protection combinedobtainable<br />
with a space-saving<br />
combined guide system.<br />
LO 70 and LO 90<br />
• For a good room and working<br />
climate<br />
• Energy-saving<br />
• Avoids reflections on computer<br />
screens<br />
• Increases the feeling of well-being<br />
13
The classic models with inner values<br />
14<br />
KR 59 and KR 80 convex reefing <strong>blinds</strong><br />
If you are looking for a classical, elegant blind with style, you will be well served with the KR 59 or the KR 80. You don't beco-<br />
me a classic through the outer advantages alone, the inner values are just as important, such as the simple design<br />
for decades of almost maintenance-free use. These are qualities that make a blind into a favourite blind.<br />
Federal Office for Health, Liebefeld, KR 80
What makes them unique<br />
– Light regulation adapted to the<br />
weather conditions<br />
– Thanks to low recess depths of only<br />
110 mm andnarrow slats, the KR 59<br />
is ideal for renovations<br />
– Various slat inclinations<br />
Constructive highlights<br />
– Well-proven connection technique<br />
– Stable, 59 mm or. 80 mm wide convex<br />
slats with edging on both sides<br />
– Guides with damping profiles,<br />
UV-stabilised guide bolts for<br />
low-noise operation<br />
– Movable, pull-out endrail bolts,<br />
thereby making jamming impossible<br />
– Mounting strap made from dirtrepellant,<br />
age-resistant polyester<br />
Option<br />
– Cord guidance on the KR 80<br />
Optimal connection: The patented,<br />
maintenance-free connection between<br />
the slat andthe mounting strap is<br />
carriedout using a stainless steel eye,<br />
which is insertedinto the flange<br />
without weakening the slat.<br />
Cord guidance: As an option, the KR 80<br />
is available with cord guidance. With<br />
this filigree cord guidance, the slat<br />
<strong>blinds</strong> become a design element for<br />
modern facades.<br />
Drive<br />
– Manual or motor drive: also available<br />
with an electronic controller on<br />
request<br />
Flexible application<br />
– Also available with daylight optimisation<br />
(LO)<br />
– The slats of the KR 80 can also be<br />
suppliedperforated(hole proportion<br />
5%, hole size 0.8 mm)<br />
– <strong>Slat</strong> blindandinsect protection combinedobtainable<br />
with a space-saving<br />
combined guide system.<br />
KR 59 and KR 80<br />
• The classic blind<br />
• Ideal for renovations<br />
• Low noise operation<br />
15
The convenient and economical solution<br />
16<br />
EC 70 and EC 100 economy reefing <strong>blinds</strong><br />
Are you looking for a particularly modern solution that is both low-cost and convenient? Then we would recommend the<br />
EC 70 or EC 100 Economy Reefing Blind. Economic because this simply designed blind covers your basic requirements<br />
for sun, glare and sight protection. Without superfluous and costly extras. The cable guidance and the low recess heights<br />
characterise the light construction. These <strong>blinds</strong> act as aesthetic façade elements.<br />
Marazzi Generalunternehmung AG, Muri near Bern, EC 70
What makes them unique<br />
– Goodtransparency thanks to the<br />
flat slats<br />
– Optimum light regulation with best<br />
possible sight andglare protection<br />
– Very low side-light incidence<br />
– Flexible slats that cannot become<br />
permanently deformed<br />
– Perfect slat guidance thanks to<br />
the plastic coatedsteel cables<br />
– Maintenance-free and service-friendly<br />
– The EC line is suitable for new<br />
constructions andfor conversions<br />
Constructive highlights<br />
– Filigreed cable guidance in the<br />
slat area<br />
– The flat slat shape make a minimal<br />
package height possible<br />
– Minimal recess dimension<br />
– High stability in the closedposition<br />
thanks to special indentations in<br />
the guide cable<br />
– Support strap made from dirtrepellent,<br />
aging-resistant polyester<br />
High stability: The special indentations<br />
in the cable guide holes guarantee a<br />
goodslat sealing andmaximum lateral<br />
hold.<br />
Filigreed cable guidance: The flexible<br />
slats of the EC 70 andEC 100 are<br />
guided at the side by means of plasticcoatedsteel<br />
cables.<br />
Drive<br />
– Manual or motor drive: also available<br />
with an electronic controller on<br />
request<br />
Flexible application<br />
– The slats are also available perforated<br />
(hole proportion 5%, hole size 0.8 mm)<br />
– <strong>Slat</strong> blindandinsect protection combinedobtainable<br />
with a space-saving<br />
combined guide system.<br />
EC 70 and EC 100<br />
• Very stable in wind<br />
• Flexible slats that do not become<br />
permanently deformed<br />
• Also suitable for conversions<br />
• Aesthetic façade element<br />
17
The flexible compacts<br />
18<br />
RE 50 Venetian <strong>blinds</strong><br />
The classic, indestructible RE 50 Venetian blind provides an extremely delicate appearance with its slat width of only<br />
50 mm. These slats are highly flexible, and recover their original shape once again after any deformation without<br />
suffering any permanent damage. The flat slat shape and the space-saving guide bolts result in a minimal package<br />
height – the RE 50 is therefore the most suitable solution in the case of low recess depths on-site.<br />
University of St. Gallen, RE 50
What makes them unique<br />
– Flexible slats that do not remain<br />
permanently deformed<br />
– Ideal in the case of low recess<br />
depths on-site<br />
– Filigree, maintenance-free slat blind<br />
– Optimal light regulation with sight<br />
andglare protection<br />
– Long service life thanks to its robust<br />
technology<br />
Constructive highlights<br />
– Highly flexible, roll-formed,<br />
non-flangedslats<br />
– <strong>Slat</strong> width 50 mm<br />
– End rail and guides made from extruded<br />
aluminium, clear anodised,<br />
available powder-coated or colouranodised<br />
at additional cost<br />
– Guides with retracted, UV-stabilised<br />
damping profiles for silent operation<br />
– Bridging tape made from weatherresistant<br />
Terylene<br />
Option<br />
– Support strap made from dirt-repellent,<br />
aging-resistant polyester<br />
Indestructible: The highly flexible,<br />
50 mm wide slats are extremely robust.<br />
Robust design: The bridging tape controls<br />
the inclination angle of the slats<br />
and acts as an additional slat guide.<br />
Drive<br />
Manual or motor drive; also available<br />
with electronic controller on request.<br />
Flexible application<br />
The RE 50 is also excellently suitable as<br />
an indoor blind.<br />
RE 50<br />
• Perfect solution in case of tight<br />
recess dimensions<br />
• Flexible slats that do not remain<br />
permanently deformed<br />
• Ideal for renovation work<br />
19
Bringing colour into your life<br />
20<br />
Selection of colours<br />
Schenker <strong>blinds</strong> can be selected in a comprehensive range of attractive colours. In addition, we offer all of the colours of the<br />
rainbow and even a few more: For your individual colour planning, we make use of the NCS Colour System, with well over<br />
1,000 colours that are suitable for external use. Your Schenker Blinds consultant will be happy to show you our colour<br />
samples.
Colour palette<br />
All of the metal parts and slats are available in many different<br />
colours. Side guidance elements, slat clips and end rails in<br />
colour are available for an additional charge. Our specialists<br />
will be happy to advise you which slat colours of the various<br />
models are available with or without a surcharge. Ideally,<br />
you can determine the desired colour combination based on<br />
original colour samples on the object on location.<br />
NCS-S 3560-R 330<br />
Purple<br />
NCS-S 2020-G90Y<br />
NCS-S 3560-Y80R<br />
NCS-S 1080-Y20R<br />
RAL 7016<br />
RAL 9007<br />
RAL 9006<br />
NCS-S 3000-N<br />
NCS-S 1502-G<br />
NCS-S 0502-B<br />
NCS-S 0502-Y<br />
NCS-S 0903-Y27R<br />
120<br />
Terracotta red<br />
720<br />
Chrome yellow<br />
276<br />
Anthracite grey<br />
907<br />
Aluminium grey<br />
140<br />
Aluminium<br />
130<br />
Grey<br />
904<br />
Light grey<br />
010<br />
White<br />
901<br />
Pure white<br />
905<br />
Cream white<br />
Well over 1,000 colours on request<br />
With a range of well over 1,000 NCS colours (Natural Colour<br />
System ® ) that are suitable for external use, the worldof<br />
colour <strong>blinds</strong> stands open for you. As with the standard<br />
colours, these are suitable for all slats andmetal components<br />
in our wide range of <strong>blinds</strong>. Thanks to the careful processing,<br />
the individual blind elements are weather resistant and<br />
colour-fast. Special colours are subject to a surcharge.<br />
NCS-S 2010-Y30R<br />
NCS-S 4010-Y50R<br />
NCS-S 7020-B90G<br />
NCS-S 8010-Y50R<br />
NCS-S 3040-B40G<br />
NCS-S 4030-R90B<br />
NCS-S 5040-B<br />
NCS-S 4350-R74B<br />
909<br />
Beige green<br />
240<br />
Light beige<br />
110<br />
Beige<br />
780<br />
Bronze<br />
220<br />
Moss green<br />
071<br />
Chalet brown<br />
908<br />
Turquoise blue<br />
903<br />
Dove blue<br />
440<br />
Azure blue<br />
906<br />
Ultramarine<br />
These colours are not binding colour shade samples. Our<br />
metal fan is to be used for the definition of the individual<br />
colour shades.<br />
21
Technicalinformation<br />
22<br />
for all slat <strong>blinds</strong><br />
You will find the most important technical information about our slat <strong>blinds</strong> on the following pages. These include the<br />
minimum and maximum dimensions of the <strong>blinds</strong>, the recess dimensions, drawings of the guides and guide brackets and<br />
various installation examples.
48<br />
GM 200 Technology<br />
Recess dimensions (mm)<br />
Opening height (hl) Recess height (hs)<br />
Limiting dimensions<br />
80<br />
Individual Coupled<br />
Crank Motor Crank Motor<br />
Opening height (hl) min. 0,6 m 0,6 m 0,6 m 0,6 m<br />
Opening height (hl) max. 4,0 m 4,0 m 4,0 m 4,0 m<br />
Construction width (bk) min. 0,6 m 0,6 m<br />
Construction width (bk) max. 2,8 m 2,8 m<br />
GM 200<br />
Crank/Motor<br />
600–1000 235<br />
1001–1250 265<br />
1251–1500 290<br />
1501–1750 320<br />
1751–2000 345<br />
2001–2250 375<br />
2251–2500 410<br />
2501–2750 435<br />
2751–3000 465<br />
3001–3250 490<br />
3251–3500 520<br />
3501–3750 545<br />
3751–4000 575<br />
Maximum surface area 6,5 m 2 6,5 m 2 6,5 m 2 20 m 2<br />
Maximum number 3 4<br />
74 – 89<br />
95/120<br />
28<br />
30<br />
75<br />
min. 60 cm<br />
max. 280 cm<br />
Guide Guide bracket Installation examples<br />
Guide bracket<br />
hs<br />
hl<br />
Guide on plaster<br />
min. 60 cm<br />
max. 400 cm<br />
Guide bracket cast Double guide with bracket<br />
120<br />
bk<br />
max. 6,5 m 2<br />
23
GM 100 Technology<br />
Recess dimensions (mm)<br />
40<br />
24<br />
Opening height (hl) Recess height (hs)<br />
Limiting dimensions<br />
98<br />
GM 100<br />
Crank/Motor<br />
600–1000 240<br />
1001–1250 272<br />
1251–1500 296<br />
1501–1750 328<br />
1751 – 2000 361<br />
2001 – 2250 385<br />
2251 – 2500 417<br />
2501 – 2750 449<br />
2751 – 3000 473<br />
3001 – 3250 506<br />
3251 – 3500 538<br />
3501 – 3750 562<br />
3751 – 4000 594<br />
Individual Coupled<br />
Crank Motor Crank Motor<br />
Opening height (hl) min. 0,72 m 0,72 m 0,72 m 0,72 m<br />
Opening height (hl) max. 3,20 m 3,20 m 3,20 m 3,20 m<br />
Construction width (bk) min. 0,60 m 0,69 m<br />
Construction width (bk) max. 2,5 m 2,5 m<br />
Maximum surface area 6,0 m 2 6,5 m 2 6,0 m 2 18 m 2<br />
Maximum number 3 4<br />
Guides Guide holder Installation examples<br />
74 – 89<br />
Guide holder<br />
95/120<br />
Cast guide holder<br />
28<br />
30<br />
75<br />
hs<br />
hl<br />
min. 60 cm<br />
max. 250 cm<br />
120<br />
bk<br />
Installation on plaster<br />
Dual guide with holder<br />
min. 72 cm<br />
max. 320 cm<br />
max. 6,5 m 2
MV 90 Technology<br />
Recess dimensions (mm)<br />
Opening height (hl) Recess height (hs)<br />
Limiting dimensions<br />
Individual Coupled<br />
Crank Motor Crank Motor<br />
Opening height (hl) min. 0,6 m 0,6 m 0,6 m 0,6 m<br />
Opening height (hl) max. 4,0 m 4,0 m 4,0 m 4,0 m<br />
Construction width (bk) min. 0,6 m 0,6 m<br />
Construction width (bk) max. 3,2 m 3,2 m<br />
Maximum surface area 8m2 8m2 8m2 20 m2 Maximum number 4 4<br />
Guides Guide bracket Installation examples<br />
42<br />
42 51,5<br />
42 51,5<br />
28<br />
28<br />
28<br />
MV 90<br />
Crank/Motor<br />
g<br />
74 – 89<br />
Guide bracket<br />
95/120<br />
MV 90<br />
Gearbox in the slat area<br />
600–1000 230 255<br />
1001–1250 240 265<br />
1251–1500 255 280<br />
1501–1750 275 300<br />
1751–2000 295 320<br />
2001–2250 310 335<br />
2251–2500 330 355<br />
2501–2750 345 370<br />
2751–3000 365 390<br />
3001–3250 385 410<br />
3251–3500 400 425<br />
3501–3750 420 445<br />
3751–4000 440 465<br />
Single guide profile<br />
Single guide profile<br />
with screen at front<br />
Single guide profile<br />
with screen at rear<br />
28<br />
30<br />
75<br />
min. 60 cm<br />
max. 320 cm<br />
Guide on insulation<br />
with insertion plate<br />
Guide bracket, cast Guide on plaster<br />
min. 60 cm<br />
max. 400 cm<br />
bk<br />
max. 8 m 2<br />
130 mm up to bk 2.5 m<br />
140 mm above bk 2.5 m<br />
25
26<br />
VR 70/VR 90 Technology<br />
Recess dimensions (mm) Technical data for LO model identical<br />
Opening height (hl) Recess height (hs)<br />
Limiting dimensions<br />
17<br />
17<br />
� 52<br />
22<br />
48,5<br />
VR 70<br />
Crank<br />
18,3<br />
41<br />
27,5<br />
� 53<br />
VR 70<br />
Gearbox in<br />
slat area<br />
41<br />
VR 70<br />
Motor<br />
Individual Coupled<br />
Crank Motor Crank Motor<br />
Opening height (hl) min. 0,6 m 0,6 m 0,6 m 0,6 m<br />
Opening height (hl) max. 4,25 m 4,25 m 4,25 m 4,25 m<br />
Construction width (bk) min. 0,6 m 0,6 m<br />
Construction width (bk) max. 4,5 m 4,5 m<br />
Guides VR 70/90 Guide bracket VR 70/90 VR 90 cord guidance<br />
74 – 89<br />
VR 90<br />
Crank/Motor<br />
Maximum surface area 8m 2 8m 2 10 m 2 35 m 2<br />
Maximum number 5 6<br />
45 – 108<br />
Guide bracket FEH<br />
Guide bracket<br />
95/120<br />
28<br />
Guide bracket, cast<br />
VR 90<br />
Gearbox in<br />
slat area<br />
600–1000 175 200 190 230 255<br />
1001–1250 200 225 215 230 255<br />
1251–1500 215 240 230 230 255<br />
1501–1750 235 260 250 230 255<br />
1751–2000 255 280 270 235 260<br />
2001–2250 270 295 285 250 275<br />
2251–2500 295 320 310 270 295<br />
2501–2750 315 340 330 285 310<br />
2751–3000 330 355 345 300 325<br />
3001–3250 345 370 360 320 345<br />
3251–3500 365 390 380 335 360<br />
3501–3750 385 410 400 350 375<br />
3751–4000 405 430 420 370 395<br />
4001–4250 420 445 435 385 410<br />
Single guide FE<br />
Double guide FD<br />
Single guide FER<br />
Fixed guide<br />
Centre support<br />
Double guide FDR<br />
30<br />
30<br />
75<br />
min. 60 cm<br />
max. 450 cm<br />
bk<br />
min. 60 cm<br />
max. 425 cm<br />
110 mm for VR 70<br />
130 mm for VR 90<br />
max. 8 m 2
KR 59/80 Technology<br />
Recess dimensions (mm)<br />
Opening height (hl) Recess height (hs)<br />
Limiting dimensions<br />
17<br />
17<br />
22<br />
48,5<br />
KR 59<br />
Crank/Motor<br />
� 52 � 53<br />
41<br />
18,3<br />
27,5<br />
KR 59<br />
Gearbox in<br />
slat area<br />
Individual Coupled<br />
Crank Motor Crank Motor<br />
Opening height (hl) min. 0,6 m 0,6 m 0,6 m 0,6 m<br />
Opening height (hl) max. 4,25 m 4,25 m 4,25 m 4,25 m<br />
Construction width (bk) min. 0,6 m 0,6 m<br />
Construction width (bk) max. 4,5 m 4,5 m<br />
41<br />
KR 80<br />
Crank/Motor<br />
Guides KR 59/80 Guide bracket KR 59/80 KR 80 cord guidance<br />
74 – 89<br />
45 – 108<br />
Guide bracket FEH<br />
Guide bracket<br />
95/120<br />
Guide bracket, cast<br />
KR 80<br />
Gearbox in<br />
slat area<br />
600–1000 205 230 230 255<br />
1001–1250 230 255 230 255<br />
1251–1500 250 275 230 255<br />
1501–1750 270 295 250 275<br />
1751–2000 290 315 265 290<br />
2001–2250 310 335 285 310<br />
2251–2500 335 360 300 325<br />
2501–2750 360 385 320 345<br />
2751–3000 380 405 335 360<br />
3001–3250 400 425 355 380<br />
3251–3500 420 445 370 395<br />
3501–3750 445 470 390 415<br />
3751–4000 465 490 405 430<br />
4001–4250 485 510 420 445<br />
Maximum surface area 8m 2 8m 2 12 m 2 35 m 2<br />
Maximum number 5 6<br />
Single guide FE<br />
Double guide FD<br />
Single guide FER<br />
Fixed guide<br />
Centre support<br />
Double guide FDR<br />
28<br />
30<br />
30<br />
75<br />
min. 60 cm<br />
max. 450 cm<br />
min. 60 cm<br />
max. 425 cm<br />
bk<br />
max. 8 m 2<br />
110 mm for KR 59<br />
120 mm for KR 80<br />
27
28<br />
EC 70/100 Technology<br />
Recess dimensions (mm)<br />
Opening height (hl) Recess height (hs)<br />
Limiting dimensions<br />
EC 70<br />
Crank/Motor<br />
EC 70<br />
Gearbox in<br />
slat area<br />
Individual Coupled<br />
Crank Motor Crank Motor<br />
Opening height (hl) min. 0,6 m 0,6 m 0,6 m 0,6 m<br />
Opening height (hl) max. 4,25 m 4,25 m 4,25 m 4,25 m<br />
Construction width (bk) min. 0,6 m 0,6 m<br />
Construction width (bk) max. 4,5 m 4,5 m<br />
Cord guidance Guide bracket Installation examples<br />
20<br />
30<br />
EC 100<br />
Crank/Motor<br />
Maximum surface area 8m 2 8m 2 12 m 2 35 m 2<br />
Maximum number 5 6<br />
71<br />
25<br />
Cable guide front installation<br />
Cable guide window sill installation<br />
43<br />
52<br />
EC 100<br />
Gearbox in<br />
slat area<br />
600–1000 190 215 180 205<br />
1001–1250 190 215 180 205<br />
1251–1500 190 215 180 205<br />
1501–1750 190 215 180 205<br />
1751–2000 190 215 180 205<br />
2001–2250 210 235 180 205<br />
2251–2500 210 235 180 205<br />
2501–2750 210 235 180 205<br />
2751–3000 230 255 180 205<br />
3001–3250 230 255 180 205<br />
3251–3500 250 275 180 205<br />
3501–3750 250 275 200 225<br />
3751–4000 250 275 200 225<br />
4001–4250 270 295 200 225<br />
min. 60 cm<br />
max. 450 cm<br />
Cable guide for soffit installation Front installation<br />
bk<br />
Window sill installation<br />
min. 60 cm<br />
max. 425 cm<br />
110 mm for EC 70<br />
140 mm for EC 100<br />
max. 8 m 2
RE 50 Technology<br />
Recess dimensions (mm)<br />
Opening height (hl) Recess height (hs)<br />
Limiting dimensions<br />
17<br />
17<br />
22<br />
48,5<br />
� 52 � 53<br />
41<br />
18,3<br />
27,5<br />
41<br />
GM 100<br />
Crank/Motor<br />
600–1000 180<br />
1001–1250 180<br />
1251–1500 180<br />
1501–1750 180<br />
1751 – 2000 180<br />
2001 – 2250 190<br />
2251 – 2500 205<br />
2501 – 2750 220<br />
2751 – 3000 230<br />
3001 – 3250 240<br />
3251 – 3500 255<br />
3501 – 3750 265<br />
3751 – 4000 280<br />
Individual Coupled<br />
Crank Motor Crank Motor<br />
Opening height (hl) min. 0,8 m 0,8 m 0,8 m 0,8 m<br />
Opening height (hl) max. 4,25 m 4,25 m 4,25 m 4,25 m<br />
Construction width (bk) min. 0,6 m 0,6 m<br />
Construction width (bk) max. 4,5 m 4,5 m<br />
Maximum surface area 8m 2 8m 2 12 m 2 35 m 2<br />
Maximum number 5 6<br />
Guides Guide holders<br />
Single guide FE<br />
Dual guide FD<br />
Single guide FER<br />
Fixed guide<br />
Centre support<br />
Dual guide FDR<br />
45 – 108<br />
Guide holder FEH<br />
74 – 89<br />
Guide holder<br />
95/120<br />
Cast guide holder<br />
28<br />
30<br />
30<br />
75<br />
min. 60 cm<br />
max. 450 cm<br />
hs<br />
hl<br />
min. 80 cm<br />
max. 425 cm<br />
110<br />
bk<br />
Installation examples<br />
Guide on plaster<br />
Guide with holder<br />
on window frame<br />
max. 8 m 2<br />
29
More time for the better things in life<br />
Our service is also top on the Internet: you can call up all the information about our products and services on<br />
www.storen.ch. Fast and simple – so that you will have more time for the better things in life.<br />
30<br />
Information for professionals
Reference objects<br />
You can see the effect that our products<br />
can have on an object – whether slat<br />
<strong>blinds</strong>, roller <strong>blinds</strong>, fabric <strong>blinds</strong>,<br />
indoor <strong>blinds</strong>, shutters or sun <strong>blinds</strong> –<br />
thanks to dozens of reference objects.<br />
Different architectural styles in various<br />
regions and the wide range of available<br />
colours will help you to imagine how<br />
the desired <strong>blinds</strong> would look in your<br />
own home.<br />
Virtual model houses<br />
Take a walk through an apartment, and<br />
experience the ambience that Schenker<br />
<strong>blinds</strong> can create in a room.<br />
Try out the individual elements, change<br />
the colours, lower and raise the <strong>blinds</strong>,<br />
change their darkening level. Allow the<br />
atmosphere of the room work on you<br />
from different perspectives – our virtual<br />
model house makes it possible to do this<br />
from the comfort of your own home.<br />
Technology in detail<br />
At www.storen.ch, we have information<br />
available for professionals. For example,<br />
all the technical drawings of our products<br />
can be downloaded or examined<br />
… which can, of course, also be an<br />
advantage for laypersons.<br />
Downloading brochures<br />
All our brochures can be downloaded<br />
as a PDF from www.storen.ch<br />
Gesamtprogramm<br />
Lamellenstoren<br />
Die Wohlfühl-Storen<br />
Stoffstoren<br />
Klassisch elegant<br />
Indoorstoren<br />
Architektur wird lebendig<br />
Schönheit, die nach innen wirkt<br />
31
<strong>Slat</strong> <strong>blinds</strong><br />
Schenker Storen AG, Stauwehrstrasse 34<br />
5012 Schönenwerd, Telephone 062 858 55 11<br />
Telefax 062 858 55 20, schenker@storen.ch<br />
0800 202 202<br />
www.schenkerstoren.com<br />
GM 200<br />
Protection Sun protection ■ ■ ■ ■ ■ ■ ■ ■<br />
GM 100<br />
Weather protection ■ ■ ■ ■ ■ ■ ■ ■<br />
Sight protection ■ ■ ■ ■ ■ ■ ■ ■<br />
Noise protection ■ ■ ■ ■ ■ ■ ■ ■<br />
Entry protection ■ ■ ■<br />
Gradual darkening ■<br />
Comfort Insulation/Room heating ■ ■ ■ ■ ■ ■ ■ ■<br />
Insulation/Heat loss ■ ■ ■ ■ ■ ■ ■ ■<br />
Variable colour layout ■ ■ ■ ■ ■ ■ ■ ■<br />
Motorised drive on request ■ ■ ■ ■ ■ ■ ■ ■<br />
Individual light regulation ■ ■ ■ ■ ■ ■ ■ ■<br />
Robust, solid construction ■ ■ ■ ■ ■ ■ ■ ■<br />
Windproof ■ ■ ■ ■ ■ ■ ■ ■<br />
Weather resistant ■ ■ ■ ■ ■ ■ ■ ■<br />
Maintenance Service friendly ■ ■ ■ ■ ■ ■ ■ ■<br />
Long service life ■ ■ ■ ■ ■ ■ ■ ■<br />
Service guaranteed ■ ■ ■ ■ ■ ■ ■ ■<br />
Building type Detached houses ■ ■ ■ ■ ■ ■ ■ ■<br />
Residential buildings ■ ■ ■ ■ ■ ■ ■ ■<br />
Industrial and commercial premises ■ ■ ■ ■ ■ ■ ■ ■<br />
Public buildings ■ ■ ■ ■ ■ ■ ■ ■<br />
Construction New construction ■ ■ ■ ■ ■ ■ ■ ■<br />
■ yes ■ possible<br />
Renovations ■ ■ ■ ■ ■ ■ ■ ■<br />
MV 90<br />
VR 70, VR 90<br />
VR 70 LO / VR 90 LO<br />
KR 59, KR 80<br />
EC 70, EC 100<br />
RE 50<br />
60.004/0/09.10