Equipment Recommendations : GAUIHobby - HeliFleet.com

M1.4X6
M2X3
Parallel
(Fig.4)
M2X12
FES 2Blade Head & Swashplate Assembling
B2X5X2.5
M2X8.4
P2X3.5X2.5
M1.4X6
W1.4X2.5X0.4
P1.4X2X3.1
Ø1.4X6
M1.4X5
B1.5X4X1.2
Grips and Head Assembling Mast and Upper Swashplate Lock Assembling
Install the linkages
0 Pitch degrees (Fig. 1)
The ball link and the arm
shod e perpendicular
at 0 pitch degrees (Fig.2)
Equal
IMPORTANT:
The socket set screws of the Swashplate Lock should be tightened
after 3 conditions are all set properly:
1. The main blade is at 0 pitch degrees.(Fig.1)
2. The arm and the ball link of the Upper Swashplate Lock are perpendicular.(Fig.2)
3. The position of upper swashplate, lower swashplate and the main grips was set as (Fig.3).
4. The arm of the Upper Swashplate Lock and the Main Grips are parallel from top view.(Fig.4)
The position of upper swashplate, lower
swashplate and the main grips.(Fig.3)
Top View Assembled