7900 Instrument Stand - Haag-Streit USA

More documents

Recommendations

Info

30 1) ROOM LIGHTS NOT RESPONSIVE eClisPe rOOm lighT COnTrOl sYsTem problem problem cause solution 2) SLIT LAMP ARM SWITCH DOES NOT EFFECT ROOM LIGHTS 3) ROOM LIGHTS DO NOT RESPOND AS DESIRED 4) WALL UNIT DOES NOT AFFECT LIGHTS A) LED IN TRANSMITTER DOES NOT EMIT RED LIGHT B) LED IN TRANSMITTER DOES EMIT RED LIGHT A) CHECK DIP SWITCHES FOR CORRECT SETTINGS A) INSURE THAT TRANSMITTER IS PROPERLY CONNECTED B) CHECK PROGRAMMING OFRECEIVER B) CHECK TO INSURE NO OBJECT IS POSITIONED IN FRONT OF TRANSMITTER OR RECEIVER B) INSURE THAT TRANSMITTER IS POINTED IN DIRECTION OF RECEIVER B) IF RECEIVER IS 5' OR LESS AWAY FROM STAND ADJUST POSITION OF TRANSMITTER SO IT IS DIRECTLY IN LINE WITH THE RECEIVER B) IF RECEIVER IS MORE THAN 5' AWAY FROM STAND PLACE THE TRANSMITTER AT TOP OF POLE A) UNIT NOT IN PROPER SCENCE A) ACTIVATE SWITCHES ON SLIT LAMP ARM AGAIN A) RECEIVER NOT PROGRAMMED CORRECTLY A) CHECK WIRING B) CHECK RECEIVER A) REPROGRAM RECEIVER A) CONTACT INSTALLER OF RECEIVER B) EXCHANGE RECEIVER IN-<strong>7900</strong>
Cleaning Painted surfaces The painted metal surfaces are covered in durable, powdercoated paint which is resistant to scratching and scuffing. It may be cleaned with a clean cloth dampened with mild, soapy water or equivalent household product that uses spray application. recommended infection Control Products The disinfectant/cleaner products that we have tested and recommend for our painted items and plastic covers are as follows. • Cavicide® Hospital Disinfectant • Precise® Hospital Foam Cleaner Disinfectant Cleaning stainless steel Face Plate • Non-Abrasive Pad Cleaning anD mainTenanCe CauTiOn- Follow manufacturer’s directions for concentration and application of disinfecting, material. avoid prolonged application of any disinfectant/ cleaner products, because they may cause staining or discoloration of material. aTTenTiOn- suivez les instructions du manufacturier pour la concentration et l’application des produits désinfection. Évitez l’application prolongée de tous les produits désinfectants nettoyants, parce qu’elles peuvent causer une détérioration ou une décoloration du produit. IN-<strong>7900</strong> 31
Page 1 and 2: ��INSTALLATION AND OPERAT
Page 3 and 4: Table of Contents imPOrTanT inFOrma
Page 5 and 6: 1. inTrODuCTiOn 1.1. This Installat
Page 7 and 8: 2. insTallaTiOn 2.1. unpacking 2.1.
Page 9 and 10: TABLE 1 SWITCH SETTINGS FOR B/P VOL
Page 11 and 12: Figure 4a Figure 4b Figure 4C Figur
Page 13 and 14: 3. OPeraTing insTruCTiOns 3.1. slit
Page 15 and 16: CauTiOn- The lamp inside the instru
Page 17 and 18: 3.6.2 • The round button under th
Page 19 and 20: 3.8.2 incandescent vs. Fluorescent
Page 21 and 22: Warning-The eCliPse inFrareD rOOm l
Page 23 and 24: oom switch (rOOm) • Dual Zone tur
Page 25 and 26: P/N 17185 0.22 Figure 18 single ZOn
Page 27 and 28: P/N 17187 Figure 20 FluOresCenT inT
Page 29: TrOubleshOOTing guiDe insTrumenT sT
Page 33 and 34: (nOTes) IN-7900 33
Page 35 and 36: 19 14 21 Figure 22 mODel 7900 insTr
Page 37 and 38: item part no. description item part
Page 39 and 40: item part no. description 1 1627295
Page 61 and 62: IN-7900 61
Page 63 and 64: IN-7900 63
Page 65 and 66: (NOtES) IN-7900 65
Page 67 and 68: limited warranty the reliance® pro

7900 Instrument Stand - Haag-Streit USA

Create successful ePaper yourself

Delete template?

Save as template?