7900 Instrument Stand - Haag-Streit USA
7900 Instrument Stand - Haag-Streit USA
7900 Instrument Stand - Haag-Streit USA
- TAGS
- haag-streit-usa.com
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
30<br />
1) ROOM LIGHTS NOT<br />
RESPONSIVE<br />
eClisPe rOOm lighT COnTrOl sYsTem<br />
problem problem cause solution<br />
2) SLIT LAMP ARM SWITCH<br />
DOES NOT EFFECT ROOM<br />
LIGHTS<br />
3) ROOM LIGHTS DO NOT<br />
RESPOND AS DESIRED<br />
4) WALL UNIT DOES NOT<br />
AFFECT LIGHTS<br />
A) LED IN TRANSMITTER DOES<br />
NOT EMIT RED LIGHT<br />
B) LED IN TRANSMITTER DOES<br />
EMIT RED LIGHT<br />
A) CHECK DIP SWITCHES FOR CORRECT<br />
SETTINGS<br />
A) INSURE THAT TRANSMITTER IS<br />
PROPERLY CONNECTED<br />
B) CHECK PROGRAMMING OFRECEIVER<br />
B) CHECK TO INSURE NO OBJECT IS<br />
POSITIONED IN FRONT OF TRANSMITTER<br />
OR RECEIVER<br />
B) INSURE THAT TRANSMITTER IS<br />
POINTED IN DIRECTION OF RECEIVER<br />
B) IF RECEIVER IS 5' OR LESS AWAY<br />
FROM STAND ADJUST POSITION OF<br />
TRANSMITTER SO IT IS DIRECTLY IN LINE<br />
WITH THE RECEIVER<br />
B) IF RECEIVER IS MORE THAN 5' AWAY<br />
FROM STAND PLACE THE TRANSMITTER<br />
AT TOP OF POLE<br />
A) UNIT NOT IN PROPER SCENCE A) ACTIVATE SWITCHES ON SLIT LAMP<br />
ARM AGAIN<br />
A) RECEIVER NOT PROGRAMMED<br />
CORRECTLY<br />
A) CHECK WIRING<br />
B) CHECK RECEIVER<br />
A) REPROGRAM RECEIVER<br />
A) CONTACT INSTALLER OF RECEIVER<br />
B) EXCHANGE RECEIVER<br />
IN-<strong>7900</strong>
Change language