7900 Instrument Stand - Haag-Streit USA
7900 Instrument Stand - Haag-Streit USA
7900 Instrument Stand - Haag-Streit USA
- TAGS
- haag-streit-usa.com
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
26<br />
Fade<br />
time<br />
Zone<br />
oVerride<br />
intensity Zone<br />
raise/loWer numBer<br />
Zone<br />
intensity<br />
5.31<br />
P/N 17186<br />
Hinged CoVer<br />
6.55<br />
2.13<br />
.36<br />
sCene<br />
seleCts<br />
system<br />
oFF<br />
master<br />
raise/<br />
loWer<br />
notes:<br />
desCriPtion: reCeiVer, i.r., tWo-Zone<br />
manuFaCturer: lutron eleCtroniCs Co., inC.<br />
7200 suter road<br />
CooPersBurg, Pa. 18036<br />
model no.: grX-3102-t-WH<br />
i.r. Codes: tHis Part numBer is<br />
ProPrietary to lutron<br />
no. oF Zones: 2<br />
unit CaPaCity: 1200 Watts/Va total<br />
mounts in u.s.<br />
WallBoX: 2-gang, 3.5" deeP, (2.75" dP min)<br />
enVironmental: 32-104°F (0-40°C)<br />
PoWer: inPut PoWer: 120VaC<br />
Zone CaPaCity: standard: 25-800 Watts/Va Per<br />
Zone (oPtional: uP to 30,000 W/Va<br />
Per Zone Via ngrX-PB PoWer<br />
Booster or Hi-PoWer 2-4-6<br />
dimming modules.)<br />
Figure 19<br />
Dual ZOne reCeiVer<br />
note: See Installation Instructions that comes with Receiver.<br />
note: Voir les instructions d’installation accompagnant le récepteur.<br />
.18<br />
2.06<br />
4.48<br />
Closed<br />
CoVer<br />
2.61<br />
.88<br />
3.28<br />
.33<br />
.97<br />
.94<br />
Ø.188 X .312<br />
4 PlaCes,<br />
mounting Holes<br />
ssa<br />
Zone 2<br />
Hot<br />
sW Hot<br />
neutral<br />
Zone 1<br />
1.50<br />
3.34<br />
5.17<br />
4<br />
3<br />
2<br />
1<br />
Class 2<br />
Cu Wire<br />
only<br />
load tyPes: inCandesCent<br />
FluoresCent (dim or non-dim)<br />
reQuires grX-FdBi FluoresCent<br />
interFaCe, relianCe P/n 17187<br />
or Hi-PoWer 2-4-6 dimming<br />
module, relianCe P/n 17188<br />
ligHting<br />
Control: sCenes: 16 standard<br />
Fade time: 0-59 seC ir 1-60 min.<br />
aCCessory: oPerating Voltage: Class 2, 12VdC<br />
Via 4 loW Voltage terminals tHat<br />
aCCePt (2) #18 aWg (1.0 mm)<br />
For maXimum PerFormanCe tHe FaCe oF tHe<br />
reCeiVer sHould Be mounted PerPendiCular to<br />
tHe transmitter.<br />
see installation diagram B-17475 WHen using<br />
non-dimming FluoresCent ligHts.<br />
see installation diagram B-17476 WHen using<br />
dimming FluoresCent ligHts.<br />
IN-<strong>7900</strong>