7900 Instrument Stand - Haag-Streit USA

22
room ligHts on
Well #1
Well #2
slit lamP arm & Binding Post
room ligHts oFF
room ligHt settings
Figure 16
Wireless remOTe COnTrOl
3.8.4 Programming Dual Zone room lights
3.8.4.1. Confirm that the STBY switch is lit and
activated.
3.8.4.2. Operate one of the functions at the instrument
stand (eg. Remove a handle from a well, depress the
B/P switch etc.).
3.8.4.3. Raise the tinted, hinged cover located above
the white panel on the receiver. (See Figure 15)
3.8.4.4. Using the intensity switches lowers or raises
the intensity of lighting in the room.
3.8.4.5. Return the stand to its original condition (return
handle to well, depress the B/P switch etc.) That function
is now programmed.
3.8.4.6. The fade rate for each lighting function may
be controlled by the arrow buttons located below the
fade window.
3.8.4.7. Each function on the stand can be programmed
as above.
Zone
numBer
intensity
raise/loWer
Fade
time
Zone
oVerride
Figure 17
Dual ZOne reCeiVer
Hinged CoVer
master
raise/
loWer
Zone
intensity system
oFF
sCene
seleCts
IN-7900