+ Model ManageMent - dentes.sk

the better way to 

2009 | 2010

2 

METHOD 

MODEL 

MANAGEMENT 

Registration | Articulation 

Model fabrication 

Dosing | Mixing | Cleaning 

FRAMEWORK 

MANAGMENT 

Outhouse Digital 

Inhouse Digital 

Inhouse Manual 

MODEL MANAGEMENT 

SERVICE-BOX 

KNOW-HOW-BOX 

AG profitcircle 

PROFIT-BOX 

FRAMEWORK MANAGEMENT 

KNOW-HOW-BOX 

D-LAB 24 

Website 

Webinars 

PROFIT-BOX 

Financing Services 

Promotions 

Protection-Plan 

SERVICE-BOX 

Customer Service 

Technical Service

as a laboratory you need to ensure your future 

sustainability. it all starts with the correct choice of 

products, however, in the long-term it is even more 

important to consider other aspects such as technologies, 

processes and not to forget the laboratory 

efficiency. 

it is our objective to support you from the product 

and technology side and to enhance your productivity. 

The former is demonstrated by AG’s methods 

mapping the core processes of work preparation and 

framework manufacture in the laboratory 

model management – from model casting to 

analysis of the finished model in the articulator. 

Framework management – from the starting 

situation in the articulator to framework fabrication. 

Performance is defined by its profitability. This is 

where we can support you with more know-how, 

profitable financing and an outstanding service – the 

aG Performances. 

Every module you use from the AG Profit Circle 

provides you with another building block towards 

profitability. You can find a detailed description of 

all areas in the available aG highlife. 

Profitable in future – we will escort you through. 

rudolf Schwarzinger 

Management 

Jutta Girrbach 

Management 

Oliver amann 

Management 

AmAnnGirrbach 

3

4 

AmAnnGirrbach 

AmannGirrbach 

amannGirrbach headquartered in austria and Germany enjoys an 

strong reputation worldwide for manufacturing innovative laboratory 

products and equipment made of the highest quality materials, 

featuring the latest technological advances. 

For over 25 years our products, customer service, sales and technical 

support teams have set the standard for our industry. Our 

global commitment to the dental industry is to manufacture products 

that guarantee quality, precision and accuracy. 

allow amannGirrbach to support you in your sophisticated 

aesthetic and precision mechanical work. This is how you can 

really benefit from our scientifically founded experience. Our 

worldwide engagement in the dental industry commits us to 

manufacture products, that reduce technician error, working time 

and material cost, while increasing the overall quality and 

productivity of your work. 

The products of amannGirrbach can only be purchased from 

authorised amannGirrbach dealers. To product the integrity and 

reputation of our products and company, aG products can only be 

purchased through authorized dealers. This ensures that you will 

receive original products complete with accessories, and valid 

warranty terms. all warranties are voided if products are 

purchased through an unauthorized dealer. 

Let amann Girrbach be your guide to the fine art and exact 

science of modern dentistry. 

General enquiries: 

Phone: +43 5523 62333-399 

Fax: +43 5523 55990 

E-Mail austria@amanngirrbach.com 

Website www.amanngirrbach.com

AmAnnGirrbach 

model mAnAGement 

OvErviEW M | 2 

METhOd M | 4 

SYSTEM arTEx M | 9 

SYSTEM cOMPOnEnTS arTEx M | 14 

SYSTEM GirOFOrM M | 21 

SYSTEM cOMPOnEnTS GirOFOrM M | 26 

PrOducTS M | 31 

OrdEr inFOrMaTiOnS b | 1 

FrAmework mAnAGement 

OvErviEW F | 2 

SYSTEM cOMPOnEnTS OuTSOurcE diGiTaL F | 10 

SYSTEM cOMPOnEnTS inhOuSE diGiTaL F | 10 

SYSTEM cOMPOnEnTS inhOuSE ManuaL F | 15 

PrOducTS F | 35 

OrdEr inFOrMaTiOnS b | 19 

PerFormAnCes 

OvErviEW P | 2 

KnOW-hOW-bOx P | 5 

PrOFiT-bOx P | 21 

SErvicE-bOx P | 23 

order InFormAtIons 

MOdEL ManaGEMEnT b | 1 

FraMEWOrK ManaGEMEnT b | 19 

AmAnnGirrbach 

GEnEraL inFOrMaTiOn a | 2 

indEx a | 3 

5


aMannGirrbach Model ManageMent 

reGistration | articulation | Model fabrication 

Model ManageMent 

overvIew 

Method 

SYSteMS 

SYSteM coMPonentS 

ProductS 

„You think 

in precision, 

you think 

in functionality, 

then you think 

in giroform 

and artex.“ 

name: stefan schunke | address: fürth, Germany | 

Profession: Master dental technician | laboratory: 

Zahntechnisches laboratorium | Infos: Winner of the 

“Pfannenstiel” prize and “creative circle awards 

2006”. course representative and lecturer, both nationally 

and internationally, on the topics of occlusal 

function and morphology, author of trade publications 

including functional wax-up and milling techniques. 

M | 1

M | 2 


overvieW 


Method – SYSteMS and ProductS – PerforManceS 

grind less - earn more 

Model management represents the foundation for trouble-free 

dental prostheses. eliminate major grinding work at chairside – all 

it takes is some fine adjustment, much to the satisfaction of your 

patients. the right systems and products combined with extensive 

know-how create a virtual patient as the basis for your daily dental 

lab work. Model Management – a highly efficient method for 

manufacturing high-performance dental prostheses. 

+ 

the advantageS of Model ManageMent 

_ cost-efficient and streamlined model manufacturing 

_ Precise and customised modelling for patient convenience 

_ taking patient movement patterns into consideration 

_ Minimise grinding adjustments in patients 

_ avoiding extra costs of remakes or corrective action 

_ detecting potential defects early on in the process 

_ reproducible results through standardised processes 

_ simple work methodology ideal for everyday use – easy to learn

overvieW 

Method 

in case of Giroform ® 

models, the later 

position of the segments is determined 

prior to casting with plaster by placing 

the drill hole and the pins. 

foundation for well-fitting dental 

pro stheses: circumference of the 

expan sion through segmented 

Giroform ® 

models. 

Model of the maxilla is inserted together 

with the facebow registration into the 

artex ® 

articulator. 

Model of the mandible is inserted in relation 

to the model of the maxilla. 

the articulator serves as the virtual patient. 

targeted removal of model segments 

for the determination of the height in the 

restoration area. 

analysis of the occlusion. 

Marking the abrasion facets on the – 

occlusion of the models. 

checking the movement dynamics 

the removal of individual segments allows 

to check all movement patterns and to take 

them into consideration for restoration. 

PerforMance-Box 


SYSteMS and ProductS 

regIStratIon | artIculatIon 

_ excellent accuracy of fit of the dental 

prosthesis through 1:1 simulation of the 

patient’s jaw movements 

_ Precise, safe and simple transfer 

of patient data between surgery and 

laboratory 

Model faBrIcatIon 

doSIng | MIxIng | cleanIng 

NEW M | 32 

_ Patented sprinkling technology ensures 

homogenous 

_ time, material and plaster saving 

of 20 to 25 % 

NEW M | 33 

_ consistant and reproducible quality 

of the material 

_ Perfect mixing results due to patented 

geometry of the mixing blades 

Know-how-Box P | 5 

courses, d-lab 24, Website, Webinars 

ProfIt-Box P | 21 

financing services, Promotions, Protection Plan 

ServIce-Box P | 23 

customer service, technical service, repair companies 

M | 10 

M | 22 

_ outstanding precision by controlling 

plaster expansion 

_ the simplified production method saves 

working time and material costs and 

delivers reproducible results 

M | 34 

_ this class iv die stone enables continuous 

working due to short setting period and 

high quality 

_ ideal expansion adapted to the Giroform ® 

model production (setting expansion of 

only 0.08 %) 

_ extremely long processing time of 

7 minutes 

M | 3

M | 4 


Method 

from the impression to the finished, high-precision 

giroform ® 

model and application in the artex ® 

articulator* 

1 

trim the impression (working model). 

5 

When the Giroform ® 

pins have been 

inserted into the drilled holes, the 

base plate is put aside for later use. 

(important when multiple models 

are produced) 

9 

smartbox – push button for water 

and plaster powder dosage. 

13 

after 30 minutes, the dental arch is 

detached from the base plate. 

2 

the impression is fixed onto the 

impression carrier with Giroform ® 

— 

putty, align the impression and putty 

insulation is trimmed. 

6 

trimmed impression of the opposing 

jaw on impression carrier, while the 

holes for the 8 pins are drilled for 

the counter bite. 

10 

smartmix mixes the dental arch 

plaster. 

14 

Partition/saw tooth arch into segments 

(tip: in order not to damage 

the tooth arch, first separate the 

tooth arch in the middle). 

3 

With the Giroform ® 

base plate inserted, 

the impression carrier is attached 

to the plate holder. 

7 

Mark out the selected drilling hole on 

used base plate (multiple usages). 

11 

upper and lower jaw prior to stone 

pour in each case with pinned bases. 

15 

Giroform ® 

model pair. 

4 

Position drilling hole with the aid of 

the laser beam and initiate drilling 

procedure. 

8 

used plate with drilled holes and pins 

for opposite bite. 

12 

fill the alpenrock eliminating any 

voids into the impression model – 

only to the top of the putty insulation. 

16 

at the dental lab, the transfer table 

is placed in the articulator or the 

special mounting articulator used as 

a plastering device. 

*Method can be used for patients with optimally functioning pre-condition.

Method 

17 

artex ® 

cr with inserted upper jaw 

model. 

21 

open the side shift setting screw to 

open the iss. set the anterior guidance 

pin out of contact. 

18 

Giroform ® 

-Models were articulated 

in static occlusion using a face bow 

registration. 

to determine the height the antagonists 

are put into their deepest position 

alongside one another. articulator 

centric is open. 

d-laB 24 – the new e-learning portal by amannGirrbach. 

digital instructions, videos, forums and much more training 

material on aG methods. P | 16 

22 

19 

Mark out the grinding facets on the 

occlusion with a pencil. 

23 

re-insert the other segments and 

remove the segments that determine 

the height. use articulating film to 

mark out and adjust any premature 

contacts - with the centric articulator 

relation closed. 

The entire 

user-know-how is in an 

E-Learning display format 

d-lab24.com 

Information is available under 

www.amanngirrbach.com 




20 

reduce the master model for height 

analysis. remove all segments up 

to the neighbouring teeth from the 

model. 

24 

check the dynamic occlusion – lateral 

motion. are the abrasion facets 

on the teeth close to the restoration 

area providing guidance now? 

M | 5

M | 6 


Method 

the artex ® 

facebow – the better way to obtain an anatomically correct 

registration of the patient’s cranium/axis relationship 

1 

Preparation of the facebow: the 

nasion bar is secured in a rear position. 

Joint support inserted with 

its vertical position fixed by a wing 

screw. 

5 

Move the artex ® 

facebow close to 

the patient‘s face. 

9 

Move the joint support up to the 

bite fork and tighten the wing screw, 

thus securing the position of the 

upper jaw. 

2 

Prepare the bite fork in a 

double-boiler. 

6 

introduce the ear tips into the external 

auditory meatus while sliding the 

sides of the facebow together and 

fix them in position by tightening the 

locking screw. 

it takes only 2 minutes to apply the 

facebow. 




10 

3 

introduce the bite fork into 

the patient’s mouth. 

7 

Place the nasion adapter on the glabella 

by applying gentle thumb pressure 

till the marker on the nasion bar 

is reached. Patient is lying down. 

11 

remove the facebow and detach the 

joint support together with the bite 

fork registration. 

4 

Position the bite fork at the dental 

arch of the upper jaw. 

8 

fix the nasion bar by tightening the 

screw on the bar with your free hand. 

12 

fix the bite fork registration on a 

plaster bed on the transfer table for 

safe transport of the secured upper 

jaw position to the dental lab. 

The entire 



d-lab24.com 




www.amanngirrbach.com

Method 

Sidestep Splitex ® 

calibration 

1 

remove model plates, magnets and 

magnet holders from the upper and 

lower parts of the artex ® 

articulator. 

5 

insulate the carbon surface in the 

area of the adhesive plate by applying 

a thin layer of petroleum jelly. 

9 

apply two strands of glue near the 

center of the splitex ® 

plate. 

2 

replace the magnet holders by the 

mounting plates and secure them 

with screws in the upper and lower 

parts of the artex ® 

articulator. 

6 

screw down the adhesive plate onto 

the lower part of the artex ® 

articulator. 

close the artex ® 

articulator and let 

the glue dry. 




10 

3 

screw down the splitex ® 

toP plate 

on the upper part of the artex ® 

articulator. 

7 

Place the artex ® 

articulator upside 

down and put splitex ® 

key in place. 

11 

calibrate further artex ® 

articulators 

using the splitex ® 

key for metric 

commonality. 


4 

insert the splitex ® 

magnet holder and 

magnet into the toP plate. 

8 

Put splitex ® 

mandibular adjustment 

plate on top of the key. 

12 

Models can be transferred from one 

calibrated artex ® 

articulator to the 

next as every dental technician and 

every dentist has his or her own 

artex ® 

articulator. 

The entire 



d-lab24.com 





M | 7

SYSteM 

articulation | registration 

artex ® 

system 


M | 9

M | 10 

Model ManageMent articulation – reGistration 

systeM descriPtion 

artex ® 

system 

artex ® 

system – the perfect communication between 

dentist, dental technician and the patient 

for maximum accuracy of fit for wellfunctioning 

dentures, working with 

an articulator is essential. the specific 

challen ges are to record the patient’s 

jaw position quickly and reliably, 

and to transfer this information precisely 

and as simply as possible between 

the dentist and the dental technician. 

artex ® 

is renowned worldwide as 

being fully functional and reliable, 

and for dentists and dental technicians 

alike it is an effective aid in 

recording static jaw relationships and 

simula ting jaw movements. the system‘s 

modular design means that it 

can be used for specific requirements, 

thereby offering maximum 

flexibility. 

the artex ® 

system: 

for the best possible link-up between 

dentist and dental technician. 

for the ultimate in reliability and 

accuracy. for perfect service to the 

patient.

articulation – reGistration Model ManageMent 


artex ® 

system 

artex ® 

facebows and articulators, the better way to ensure correct 

static and dynamic occlusion of dental prostheses 

Quick, safe, efficient, simple and low-cost: obtaining 

and communicating patient data using artex ® 

. 

the artex ® 

facebow, transfer stand and articulator form a 

complete data communication system. the dentist uses the 

artex ® 

facebow to determine the patient’s maxillary position 

in relation to the cranial axes. this important anatomical 

information is obtained quickly, precisely and efficiently and 

secured safely on the transfer stand for its transport from the 

dentist’s office to the dental laboratory. there, the models are 

placed in an artex ® 

articulator serving as a virtual patient. 

this simple and highly efficient transfer of the facebow 

registration using the artex ® 

articulator allows work to be 

continued as if at chairside, significantly reducing the time 

for corrections in terms of occlusal contouring. 

artex ® 

articulators – effective, precise, stable and 

sensitive movement simulators. 

Produced by the dental technician in an articulator, a dental 

prosthesis must function without a problem for the patient. 

an articulator is a great way to emulate the patient‘s movements, 

saving the dentist chairside time and the patient quite 

a bit of pain. 

the reproducible centric relation ensures safe starting and end 

positions of every jaw movement. the artex ® 

articulator can 

discover, check and remove any defects smaller than 20 µm. 

lightweight, stable, ergonomic and very precise – the artex ® 

articulator facilitates and accelerates work on the model. it is 

practice-oriented, reliable and competitively priced. for these 

reasons, the artex ® 

brand enjoys such a good reputation and 

its articulators are among the most popular world-wide. the 

artex ® 

product range employs a modular design and is focused 

on features that are really necessary. 

M | 11

M | 12 

Model ManageMent articulation – reGistration 


Splitex ® 

system – for accurately 

calibrating artex ® 

articulators 

20 

0 

-20 

-40 

-60 

artex ® 

system 

The size of the gap 

between left molar and 

premolar, frontal view. 

Kavo Artex Whip-Mix 

Scientifically tested precision: 

all 4 artex articulators (classic-version) have smaller dimensional deviations than 

comparable competitors 

source: „determining the accuracy of articulator interchangeability and hinge axis reproducibility“, 

Panayiota hatzi (dds, Ms), Philip Millstein (dMd, Ms), alvaro Maya (dMd, Msd) – school of dental 

Medicine, tufts university, boston, Mass. 

Publishing: J Prosthet dent 2001, 85:236-45 

accurate calibration of the artex ® 

articulators 

using Splitex ® 

calibrated articulators facilitate model transport from the 

practice to the laboratory: the work produced and checked for 

function in the articulator at the dental lab will work just as 

well with a perfect receptor fit in the patient’s mouth. 

every dental technician and dentist will have his or her own 

calibrated articulator. this will save costs of delivery and 

prevents articulator damage, thus enhancing economic 

efficiency. 

the high precision of the artex ® 

articulators ensuring a perfect 

receptor fit in the patient’s mouth has been impressively 

confirmed by a scientific study conducted at tuft’s university, 

boston, Ma, usa.

ArticulAtion – registrAtion Model ManageMent 

systeM Description 

artex ® 

the high-performance, precise and transferable 

system for simulating jaw movement 

artex ® 

Facebow 

splitex ® 

calibration 

+ 

system 

your + points at a glance 

artex ® 

articulatiors 

systeM coMponents 

+ Full system 

_ transfer chain from facebow to articulator 

_ Fast and reliable transfer of patient data between dental practice and laboratory 

+ system compatible 

_ Well thought out graduation of articulator types 

_ system entry can be matched consistently to the profile of requirements 

+ Modular 

_ intelligent, modular design of the entire Artex ® 

system 

_ can be used for all indications 

+ precise 

_ High-precision manufacturing in resistant materials ensures the lowest tolerances 

and highest quality standards for day-to-day use 

+ proven 

_ system renowned and successful world-wide 

_ Built on the experience of 25 years in articulator construction 

artex ® 

transfer stand 

artex ® 

transfer table 

M | 13

M | 14 

Model ManageMent ArticulAtion – registrAtion 


artex ® 

articulators 

the basic principles of all artex articulators 

all artex ® 

articulators at one sight 

technical data chart non Arcon-Design Arcon-Design 

sci 

(sagittal condylar inclination) 

artex ® 

Bn artex ® 

cn artex ® 

ct artex ® 

cp artex ® 

cr 

35° 35° -15° to +60° -20° to +60° -20° to +60° 

Bennett-angle (Hci) 15° 0° to +20° 0° to +20° -5° to +30° -5° to +30° 

protrusion – – – – 0 to 6 mm 

retrusion – – – – 0 to 2 mm 

iss (immediate sideshift) 

– – – – 

0 to 1,5 mm 

(per side) 

Distraction – – – 0 to 3 mm 0 to 3 mm 

centric design 

upper and lower articulator 

arms prevented from coming 

apart inadvertently in open 

centric by: 

Arbitrary pins for direct transfer 

with Artex facebow 

centric click centric click centric click 

_ integrated magnetic model plate system 

_ Adjust design for high-precision receptor fit 

_ lower part of articulator designs cn, ct, ct and cr made 

of carbon: 

- makes for lightweight, strong and ergonomic design and 

easy handling 

- 3 positions, no tipping over 

_ overall height, internally: 126 mm – large working area 

offering a lot of space for mounting models 

_ reliably reproducible centric relation for the starting and 

end positions of every movement, checking position for static 

occlusion 

_ Bonwill triangle with 110 mm side length, made up of the 

intercondylar distance and the incisal point 

_ Average-value marking of the occlusal surface plane 

_ Adjustable scaled anterior guidance pin (-5 mm to +10 mm) 

_ support pin for upper part of the Artex ® 

articulator flipped back 

_ calibration using splitex ® 

centric lever for 

semi-axes 

centric lever for 

semi-axes 

centric plate centric plate centric plate Arcon-clip Arcon-clip 

no no yes yes yes



artex ® 

in non-arcon design 

_ safe and easy handling due to positively driven condyle balls 

_ the anatomy is upside-down. the condyle ball is on the upper part, the condyle guidance plane is in 

the lower part of the articulator 

_ the upper and lower parts of the non-arcon articulator are in unison, even in an open centric position 

artex ® 

bn 

artex ® 

cn 

artex ® 

ct 

articulators 

the artex ® 

base model - the economic entry to 

the artex ® 

world of articulators 

_ non-Arcon design centric articulator 

_ the same basic concept as all Artex ® 

articulators 

_ precise functional parts made of aluminium and stainless steel 

_ Fixed condyle with 19mm track radius 

_ Fixed average condyle track inclination at 35° 

_ Fixed Bennett angle at 15° 

_ upgradable and compatible with higher end Artex articulators 

the non-arcon carbon base model - the bestselling carbon- 

– the entry to the world of artex ® 

-carbon 

artex ® 

_ Artex ® 

-carbon - lightweight, robust, ergonomic 

and highly precise 

_ simple and pleasant handling 

_ 3 working positions, no tipping over 

_ “click” - centric quick lock 

_ Fixed average condyle track inclination at 35° 

_ Bennett angle adjustable from 0 to 20° 

the non-arcon workhorse – 

the prosthetic articulator 

_ partially adjustable non-Arcon articulator 

_ Artex ® 

-carbon - lightweight and robust, providing 

perfect handling 

_ Adjustable inclination of the condyle track inclination 

from -15° to 60° 

_ Bennett angle adjustable from 0 to 20° 

_ “click” - centric quick lock 

_ Arbitrary pins for face bow adaptation 

+ 

+ 

+ 

M | 15

M | 16 



artex ® 

articulators 

in arcon design 

_ As found in natural anatomy: the condyle ball is on the lower part, the condyle guidance plane is 

on the upper part of the articulator. 

_ Adjustment of the condyle guidance elements is possible using an individual position registration. 

artex ® 

cp 

artex ® 

cr 

the arcon base device 

_ partially adjustable Arcon articulator with super smooth 

condyle track guide 

_ Artex ® 

-carbon - lightweight and robust, providing perfect 

handling 

_ 3 working positions, no tipping over 

_ High-precision and robust centric quick lock via mechanically 

guided semi axis 

_ Arbitrary pins for direct transfer with the Artex ® 

facebow 


from -20° to +60° 

_ Distraction permitting release of compressed mandibular joints 

from 0 to 3 mm 

_ Arcon clip prevents separation of upper and lower articulator 

parts while centric is open 

_ Bennett angle adjustable from -5° to +30° 

Model management articulator and universal 

diagnosis and therapy device 

_ provides comprehensive adjustment possibilities to reproduce 

the patient’s clearance and movement dynamics 

_ true masticatory simulator for practice and laboratory 

_ Fully adjustable Artex ® 

carbon articulator offering the following 

additional functions: 

_ Variable sideshift function for transversal clearance, adjustable 

from 0 to 1.5 mm (for each side) 

_ Variable protrusion, adjustable from 0 to 6 mm 

_ Variable retrusion, adjustable from 0 to 2 mm 

_ Distraction permitting release of compressed mandibular joints 

from 0 to 3 mm 

_ ideal for model analysis, splint manufacture and correction 

_ Artex ® 

-carbon - lightweight and robust, providing perfect 

handling, also combining all the Artex ® 

cp advantages 


from -20° to +60° 

_ Bennett angle adjustable from -5° to +30° 

+ 

+



splitex ® 

calibration 

scientifically proven: artex ® 

articulators can be calibrated 

to a standardization with tolerances < 10 μm 

using the splitex ® 

Key and 

splitex ® 

plate set, all Artex ® 

Articulators are calibrated 

similarly. this magnetic plate 

system serves as a metrical 

aid to calibrate different articulators. 

the precision of 

calibration is such that deviations 

are brought down to 

below 10 μm. this means that 

models can be mounted and 

changed with precision on 

any calibrated Artex ® 

. 

Additionally, the ability to 

calibrate the Artex ® 

Articulators simplifies the 

process of transferring the 

model from the practice to 

the laboratory. Where both 

parties have a cali brated 

articulator, then only the 

models need to be transported, 

and not the com plete 

articulator. not only does 

this protect the articulator 

against handling problems, 

it also saves on postal 

charges. 

_ scientifically proven: Artex ® 

Articulators can be calibrated to a standardization 

with tolerances < 10 μm 

_saves articulators and increases their profitability 

_every dental technician and dentist has his/her “own” articulator 

_simplifies dispatch (only the model) and increases the information flow 

_ splitex ® 

counter plates prevent the risk of poor fit caused by plaster expansion 

and guarantee quick, precise adaptation to splitex ® 

metal plates 

splitex ® 

- keys splitex ® 

counter-plates in black 

or white 

splitex ® 

plate set for the 

carbon version 

+ 

M | 17

M | 18 



artex ® 

facebow 

anatomically correct fixation of the 

cranial-axis relationship in just 2 minutes 

the Artex ® 

Facebow is not 

just a success on account of 

its ease of handling, but also 

makes it possible to work 

rapidly and economically: in 

just two minu tes, the cranium/ 

axis relation is determined in 

correspondence to the patient’s 

anatomy. 

in functional diagnostics and 

treatment, it is an indispensable 

tool which considerably 

reduces grinding time at 

chairside. 

Artex ® 

facebow 

_ cranium/axis relation determined in corresponding to the patient‘s anatomy 

in just two minutes 

_ Quick and secure the 3-D universal joint 

_ cranium-axis oriented transfer of maxillary model to the articulator transfers 

the real jaw position precisely to the articulator and consequently reduces 

grinding time at the chairside 

_ reliable reproducibility of arbitrary axis position using cushioned leipzig nasion 

Bite fork insertion 

Face bow attached to the patient 

removing joint support with bite fork 

record from the face bow 

+



splitex ® 


saves time and plaster working at the dental practice, 

and ensures safe transport to the laboratory 

For optimally safe transport 

of patient data, the universal 

joint with bite fork is removed 

from the facebow and 

inserted into the transfer 

stand. there, the bite fork is 

fixed in plaster and then 

separated from the univer sal 

support. now all the information 

is located securely and 

permanently on the removable 

transfer table, and can 

be safely transported. 

splitex ® 


_ saves time and plaster working at the dental practice, and ensures safe 

transport to the laboratory 

_ saves on procurement of multiple facebows 

_ saves time on mounting the maxillary model 

_ simplest system on the market for transferring the facebow record from 

the dental practice to the laboratory 

inserting the bite fork registration 

into transfer stand 

Bite fork, safe for transport, in a 

plaster bed, on the transfer table 

+ 

upper model mounted patient-analogue 

in the Artex ® 

articulator with the aid 

of the transfer table 

M | 19

systeM 


giroform ® 

system 


M | 21

M | 22 

Model ManageMent MoDel FABricAtion 


giroform ® 

system 

the giroform system outsmarts the plaster 

expansion and is simple, fast and precise 

the fitting accuracy of dental prostheses 

is largely dependent on the 

precision of the models. yet this is 

the very area in which the natural 

expansion of the plaster constitutes 

the greatest source of error. the 

effects of plaster expansion are evident 

in the patient’s mouth in problems 

with the fit of prosthetic work, 

such as tension areas. 

giroform ® 

outsmarts the plaster 

expansion of the jaw segment, thus 

providing a true model of the patient’s 

mouth. 

the giroform ® 

system provides dental 

technology with a perfect and 

high-precision model making system 

on the market. By employing standardized 

and optimized procedures 

giroform ® 

guarantees permanent and 

reproducible quality. 

saves time, saves material. 

simple procedures and maximum 

precision.

MoDel FABricAtion Model ManageMent 


giroform ® 

precise, simple 

and fast 

undesirable plaster 

expansion in making the 

model 

How does giroform ® 

solve 

this challenge? 

Defeat expansion 

with giroform ® 

= eliminate 

tensions from prosthetic 

work 

system 

1 2 3 

the patient’s original mouth 

position. 

4 5 6 

the pin positions are chosen 

taking this cast into account. By 

drilling the pin-holes, there is 

secure and immovable patientanalogous 

transfer to the dimensionally-stable 

giroform ® 

plate. 

the pin-holes ensure that the 

positional information is now 

stored. the giroform ® 

Base plate 

serves as a kind of memory 

stick. 

the tooth arch following plaster 

expansion. 

the cast plaster tooth arch is 

removed from the base plate 

after 30 minutes – i.e. before the 

onset of plaster expansion. 

this allows the tooth arch to 

expand freely. However, after this 

it no longer matches the drilled 

original information on the giroform 

® 

plate. 

By superimposing the original 

and the expanded tooth arch, 

the deviation is clearly shown. 

After sawing or separating the 

tooth arch, the pins again fit into 

the drill-holes. 

the cut section serves as an 

expansion joint to accommodate 

the expansion, which is now restricted 

to just the individual segments, 

thus no longer causing 

distortion of the tooth arch. 

the segmented model therefore 

offers a precision basis for perfectly-fitting 

work. 

M | 23

M | 24 



giroform ® 

the system which 

saves double the time 

Waiting time 

Working time 

Double time saving 

Minutes 

60 

50 

40 

30 

20 

10 

0 

31,5 

25 

6,5 

Giroform ® model 

_the actual time required to make the 

model is just 6 – 7 minutes 

_the base is manufactured 

_the model can be worked on after 

only 40 minutes 

system 

58,0 

50 

8 

Classic model 

with pin & sleeve 

system 

the system that 

saves time and material 

Retention disc/ 

metal plate 

Adhesive 

Comparing Giroform ® model (100 % cost) 

with other models 

Dental arch plaster 

(65 g/90 g) 

Pins (14 pcs)/pins 

with sleeve (14 pcs) 

Base plate/base plaster 

(150 g) 

220 % 

200% 

180% 

160% 

140% 

120% 

100% 

80 % 

60 % 

40 % 

20 % 

0% 

12% 

31% 

19% 

38% 

Giroform ® model 

with 

retention 

disc 

+98% 

18% 

43% 

115% 

21% 

+131% 

33% 

18% 

43% 

115% 

21% 

Classic pin and 

sleeve model 

w/o 

with 

magnet and magnet and 

retention disc retention disc 

_the amount of plaster needed is reduced due to blocking 

out the impression with giroform putty 

_the metal disc is already fixed into the premium 

base plate 

_Multiple use of base plates, secondary plates and 

metal discs 

_Base plaster no longer required 

_the base plate is cheaper than the base plaster 

_no adhesives, guide sleeves or shell moulds required

MoDel FABricAtion Model ManageMent 


giroform ® 

precision, economy, speed 

Base plates 

secondary plates 

Quadrant plates 

+ 

system 

your + points at a glance 

giroform ® 

pin drill 


+ precise 

_ plaster expansion eliminated thanks to individually drilled based plate 

and segmentation of dental arch 

_ segments reset in correctly drilled position free of expansion 

+ Fast 

_ Model made in just six minutes 

_ the base is ready with the base plate 

+ cost-effective 

_ less plaster required for the dental arch, no plaster required for the base 

_ the entire base plate is less expensive than the corresponding amount of base plaster 

_ Base plates, secondary plates and metal discs suitable for multiple use 

+ universal 

_ can be used for saw-cut master models, opposite models, two-part 

models, anatomical casts, diagnostic models and partial impressions 

+ simple 

_ simple procedures 

_ entire system user-friendly with ergonomic design 

pins 

duplication flask 

Base collar 

M | 25

M | 26 



giroform ® 

pin drill 

perfectly formed, quality appearance, 

unbeatable performance 

the pin drill allows precise, 

fast and safe determination 

of the desired drill position. 

Drilling starts at the press of 

a button. the plate holder is 

fastened magnetically, securing 

the drill position. 

in order to guarantee pin 

friction, identical, smoothfaced 

and regular holes are 

drilled into the giroform base 

plate. the precise drill guide 

also enables uniform drilling 

depth. these specific characteristics 

of the giroform ® 

pin 

drill guarantee precise, fast 

and cost-effective model 

manufacture. 

_ Fast and easy to use 

_ laser beam for easy drill positioning 

_ plate holder smoothly adjustable thus ensuring safe and fast operation 

_ plate holder is secured magnetically and automatically when drilling starts 

_ semi-automatic drilling at the press of a button (0.5 seconds per hole) 

_ Automatic drill advance guarantees identical boreholes in the plates 

_ robust device providing many years of reliability 

strong, practical and aesthetic – 

stainless steel housing 

laser beam for easy drill 

positioning 

plate holder is secured magnetically 

and automatically when drilling starts 

+

model fabrication Model ManageMent 

system components 

giroform ® 

baseplates 

limits the amount of work, base plaster, 

sleeves and bases thus minimizing costs 

Using the Giroform base 

plate means that the model 

is already half finished. the 

base plate is expansion-resistant, 

saves one working step 

and prevents plaster expansion. 

prior to using the plaster, the 

pinhole is set into the base 

plate, recording the position 

of the individual segment. 

the high-precision homogenous 

plate material provides 

for smooth drill holes and 

guarantees precise pin guidance. 

the flat surface of the base 

plate enables simple control 

of the segment position via 

an easily recognizable light 

gap. cost-effectiveness is 

further increased by the possibility 

to re-use the base 

plate and the retention disc. 

Saves working time (base plaster, sleeves and 

moulds). Base plate ready-to-use and available in 

three sizes 

• l for standard cases 

• Xl for exceptionally large arches 

• Quadrant for sectional impressions 

Cost savings 

low-priced reusable metal 

discs for classic base plates 

Screw fitting no longer 

required saving time 

premium base plates 

incl. metal discs 

X-large 

quadrant 

_ Using the Giroform base plate means that the model is already half finished. 

large 

_ inherently stable base plate instead of the risk of secondary plaster expansion 

due to base plaster 

_ plate material and the plate strength provide for precise pin guidance 

_ only minimal amounts of dental arch plaster required 

_ metal disk and screw are re-usable, instead of using expensive special m8 screws 

_ flat base plate surface enables individual segment monitoring at a glance 

_ inclined rear surface facilitates insertion in the plate holder and model 

removal from the articulator 

_ base plate can be re-used for opposing model. 

individual segments checked at a 

glance. plane surface of the base 

plate 

multiple use of used, drilled base plates 

for opposite models and the fixed 

metal discs as retention discs for anatomical 

casts. reusable base plate 

and metal plate 

Multiple-use of premium plates for 

opposite models and classic plates 

three drill holes for pin fixing 

if working without a metal disc 

Split cast checked 

for scientifically 

verified geometry 

triangular split cast 

with wedge tapering 

to centre 

slanting facilitates insertion in drill 

plate holder and removal from articulator 

– inclined plane on rear of plate 

+ 

m | 27

m | 28 

Model ManageMent model fabrication 


giroform ® 

Precision, cost-effectiveness and speed 

_ a combination of carefully matched system components ensures the success of the final product 

_ the following system components play an important part in saving time and plaster while providing 

a high degree of accuracy 

giroform ® 

secundary plate 

giroform ® 

quadrant plate 

giroform ® 

pins 

Stability and comfort 

_ split cast check enables passive (non-magnetic) precision 

fit to the base plate 

_ the balanced magnetic force and high material strength 

prevent deformation 

_ the retention pattern on the rear has been optimized to provide 

excellent grip for the plaster during insertion in the articulator 

but also its easy removal after use 

Straightforward and versatile 

_ the standardized plate size is ideally suited to partial 

impressions - both left or right quadrant casts. no more 

trimming or grinding required 

_ drill holes for pins can be positioned at underside and will thereby 

facilitating insertion, casting and removal from the articulator 

_ the Vertex ® 

adapter enables direct connection to Vertex ® 

articulators 

_ also adaptable with the orbix system with minor alteration 

Precise and economically priced 

_ precision brass pin 

_ With smooth finish on tapered section for accurate fit 

in base plate hole 

_ With active retention area for perfect grip in dental 

arch plaster 

_ reasonably priced 

+ 

+ 

+

model fabrication Model ManageMent 


giroform ® 

putty 

giroform ® 

dublication flask 

giroform ® 

base collar 

economic and re-usable 

_ permanently applicable soft silicone putty for placing 

and blocking out the cast on the impression tray. 

_ saves time with rapid blocking-out 

_ saves plaster and therefore increases the cost-effectiveness 

_ no subsequent trimming or grinding required 

_reusable 

Versatile and durable 

_ Universal solution for individual refractory dies, several 

segments or entire dental arch 

_ ceramic firing pins allow duplicate casts to be made with 

refractory investment 

_ saves refractory investment and duplicating silicone by 

reducing duplication area 

_ the extension of the labial area also allows duplication of 

protrusive anterior teeth 

Clever and functional 

_ the vestibular extension allows incorporation of mucobuccal 

folds and soft tissue on partial prostheses or full dentures 

_ Used Giroform ® 

base plates which have already been drilled 

can be used to make master casts 

+ 

+ 

+ 

m | 29

ProduCtS 

dosing | mixing | cleaning 

M o d e l M a n ag e M e n t 

m | 31

m | 32 

Model ManageMent dosinG | miXinG | cleaninG 

prodUcts 

smartbox X2 

the most homogenous plaster 

dispensing method yet 

Weighing and mixing plaster 

and water by hand is too 

imprecise and time-consuming 

by the high standards of 

the dental laboratory. aside 

from ensuring a consistent 

high degree of dosage precision, 

the smartbox is easy to 

operate and pays for itself 

within a few months. 

Using the new dosage technology, 

the plaster is sprinkled 

very finely into the 

mixing beaker, which noticeably 

increases the homogeneity 

of the mixture 

_ time, material and plaster savings of 20 to 25% 

_ finely sprinkled plaster using the new patented plaster dosage technology 

_ multifunctional turn/ push button for simple and quick programming and programme 

selection 

_ easy operation – error-free working for everyone 

_ reproducible mixing ratio at the push of a button, accurate to within a gram 

_ integrated scales automatically measure the dosage or for manual weighing 

_ enables clean and dust free operation 

easy to fill the silo at 

the machine 

one switch for everything – 

multi-functional dial / button 

NEW 

fine plaster curtain due to 

new dosage technology 

+

dosing | Mixing | cleaning Model ManageMent 

ProducTs 

smartmix x2 

Perfect mixture results thanks to patented mixing blade geometry 

and amazingly simple operating concept 

The universal and futureproof 

vacuum-mixing machine 

with the amazingly simple 

operating concept. 

When processing homogenous 

plaster, investment material 

or paste silicon and impression 

material, the smartmix vacuum-mixing 

machine is an 

indispensable and productive 

piece of equipment. 

Smartmix mixing beaker 

The patented mixing blade geometry 

of the smartmix mixing 

beaker ensures optimal mixing 

results in all areas of application. 

By means of both horizontal 

and vertical revolution of the 

materials to be mixed, perfect 

homogeneity of mixture results 

is achieved 

rounded beaker base for 

easy cleaning 

Patented mixing apparatus 

geometry, mixing speed up to 

550 u/min 

NEW 

_ Multi-functional dial / button for quick and easy programme selection and programming 

_ Homogeneous, consistent mixing quality 

_consistent, reproducible mixtures with optimal parameter 

_Quick access to all mixing parameter: Mixing duration, speed, direction of rotation, 

interval times, pre-mixing, pre-vacuum, post-vacuum and program name 

_space saving design 

_ Meets the requirements of modern high-performance plasters and embedding masses 

_less re-work required due to consistent mixing results 

_The universal and future-proof, vacuum mixing machine 

_Beaker with mixing blade 500 ml included 

Post-vacuum-function 

+ 

M | 33

m | 34 


prodUcts 

alpenrock 

the new generation of super-hard plaster 

with optimal processing properties 

this new generation of class-4 

super-hard plaster is highly 

suitable for the manufacturing 

of tooth arches, single stumps 

and control models. processing 

and expansion properties 

perfectly match Giroform ® 

model production processes. 

_ expansion properties (hardening expansion of only 0.08%) 

perfectly match Giroform model production 

_ splinter-free processing and high pressure-resistance 

_ easy pouring due to shaker effect 

_ stable without shaker effect (thyxotrop) 

_ comfortable processing through snap-set 

_ extremely long 7-minute processing period 

_ rapid completion of hardening after 12 minutes 

_ rapid final hardness after 35 minutes 

_ possible to scan, e.g. for strip light scanners such as the ceramill map 

three colors: pastel, 

saffron, gold (see illustration above) 

4kg bag – economical 

storage-stable package size 

easy to handle 

+

dosinG | miXinG | cleaninG Model ManageMent 

prodUcts 

artifix ® 

White synthetic articulation plaster 

of outstanding consistency 

White synthetic articulation 

plaster with minimal expansion. 

this plaster can be 

mixed both manually and 

mechanically, and can be 

applied for a broad spectrum 

of indications: articulating 

working models, padding Kfo 

models, fixing the milling 

base, bite registration as well 

as for pre-casts. 

_ Quick wetting, no lumping, creamy consistency 

_ fast setting 

_ extremely low setting expansion of 0.03 %! 

serves to fasten the bite fork to the 

transfer table 

creamy texture for smooth articulation. 

load-free articulation 

sets rapidly 

+ 

m | 35

m | 36 


prodUcts 

Stones 

all Stones at one sight 

technical/physical 

data: 

Application 

Plaster for 

sectioned and 

master models 

product alpenrock 

High-strength 

dental stone 

Base plaster 

hard 

girobase 

base plaster 

Base plaster 

liquid 

girobase 

base plaster 

Plaster for 

sectioned and 

master models 

girostone ® 

american 

High-strength 

dental stone 

High-strength 

dental stone 

girodur 

synthetic 

superstone 

High-strength 

dental stone 

artifix ® 

synthetic 

plaster 

Plaster for 

full denture 

prosthetics 

giroplast 

synthetic 

High-strength 

dental stone 

class 4 4 4 4 4 3 3 

color 

gold, pastell, 

saffron 

mixing ratio (powder : Water) 100 : 20 100 : 25 

white blue 

100 : 

23-25 

rosé, 

pastell, 

yellow 

white white 

green, 

blue 

white 

100 : 22 100 : 23 100 : 30 100 : 30 

sprinkling time (s) 15 15 15 15 15 15 15 

soaking time (s) 30 30 30 30 30 30 30 

mixing time in vacuum (s) 30 30 30 40 30 30 30 

Working time (min) 7 2 5 4 5 3 4 

setting time (min) 12 4-6 10 7 10 4 10 

remove from the 

impression (min) 

linear setting expansion 

compression strength en 

26873 (mpa) 

after 2 h 

after 24 h 

35 30-45 45 45 25 – 30-45 

0,08 0,05 

0,07 

0,06 

0,08 0,11 0,10 0,03 < 0,20 

59 < 30 < 50 60 < 50 20 30 

Hardness (mpa) 262 120 150 180 < 150 50 80 

bending tensile strength (mpa) 12 12 7 5 

content (kg) 20 (5x4) 20 20 20 20 20 20 

order no. 

711110 

711120 

711130 

711240 711250 

711021 

711022 

711023 

711105 711217 

711040 

711050 

711060

dosinG | miXinG | cleaninG Model ManageMent 

prodUcts 

steamer X3 

State-of-the-art technology and a professional appearance – with Steamer X3, you 

have a functional and productive auxiliary tool at your disposal in the laboratory 

steamer X3 has all the features 

that are really needed in 

every-day laboratory procedures. 

by focusing on the 

basics, it guarantees maximum 

reliability and longevity 

and thereby enables greatest 

productivity. 

_ large capacity tank – 3.7 litres 

_ High-end components offer maximum reliability and productivity 

_ clear function display, e.g. the minimum water quantity 

_ rust-proof aluminum tank provides extended lifespan 

_ smooth, rounded surfaces for easy cleaning 

_ drain valve positioned at the very bottom guarantees complete rinsing 

of limescale deposits in the tank. 

_ floor mounted or wall mounted 

steamer X3 is filled without 

funnel 

the ergonomic hand piece is 

always within reach 

sealing lid without vulnerable 

pressure control valve 

+ 

m | 37


amannGirrbach Framework management 

ceramill mall 

Framework management 

overvIew 

method 

SyStemS 

SyStem comPonentS 

ProductS 

„I want one 

contact partner 

for diverse 

framework 

designs“ 

name: ralf bahle | Place of residence: leutkirch | 

Profession: master dental technician | Laboratory: 

Dentaris Gmbh | Infos: he gained extensive knowledge 

of marketing, function, precision and esthetics at numerous 

courses and lectures. in cooperation with renowned 

implantologists, he developed a reproducible planning 

concept that he now also passes on at courses. 

F | 1

F | 2 

Framework management ceramill mall 

Overview 

Framework management 

method – Product – know-how – PerFormance 

all options from one source 

Framework management offers every laboratory an economical 

and technologically advanced method of fabricating frameworks. 

The most important issues are material and indication possibilities, 

as well as the technician’s daily decision on the type of production 

method. 

ceramill mall 

Outsource Digital 


Inhouse Manual

ceramill mall Framework management 

Overview 

„ceramill mall“ – at amannGirrbach this stands for a wide choice of framework fabrication, all from one source. Just like in a 

shopping mall, we will offer you a tailor-made solution to suit your present situation. 

according to your material or indication requirements, this could be either manual processing using the ceramill multi-x or the 

digital technique using the ceramill caD/cam – both for use in your own laboratory. 

Then again, you may decide to have your frameworks processed externally. The milling center “ceramill m-center” could therefore 

be the right option for you. with their large array of materials (zirconium oxide, glass ceramic, non-precious metal alloys, 

titanium, composite) this could even be used as an addition to your own in-house processing. 

whatever you decide – we will be pleased to support you in your search for the right option. 

Outsource 

Digital 

Inhouse 

Digital 

Inhouse 

Manual 

ceramill mall 

we do it your way – 

Framework fabrication that adapts to your requirements 

L 

L 

MODELL FABRICATION CONSTRUCTION MILLING 



Version 1 

L 


Version 2 

L 


L 

L 

L 

L 

Scan/CAD 

Scan/CAD 

Fabrication in acrylic 

Fabrication in wax 

L 

L 

L 

CNC (milling, sintering) 

CNC (milling) 

Ceramill Multi-x 

Casting 

laboratory 

amannGirrbach 

Postage 

Sending data per email 

additional option 

F | 3

F | 4 


Overview 

ceramill mall 

with the ceramill mall an ideal system combination is available for every 

laboratory, both in economical and in dental technical terms 

+ 

ceramill mall 

_The economic and dental technical, ideal system 

combination for every laboratory 

_a variety of indications 

_a variety of materials 

_a choice of technology (manually, digitally) 


_Great flexibility due to the option of in-house 

and out-sourcing 

ceramill map 

The high performance model scanner 

ceramill mind 

The brain of the system: 

The construction software 

ceramill m-center 

reliable and precise: 

The milling center 

inhouse Digital 

ceramill map 

The high performance model scanner 

ceramill mind 

The brain of the system: 

The construction software 

ceramill motion 

manageable, versatile and accurate: 

The cam milling machine 

inhouse manual 

ceramill multi-x 

The indication champion for 

zirconium oxide 

ceramill cast 

highly precise framework 

fabrication in metal 

the advantageS oF ceramILL maLL 

_Shared assessment of requirements to support 

you in making an objective decision for the 

best economical and dental technical system 

combination 

_System integration with model management, 

framework management and therefore 

processing safety, consistency and precision 

_investment safety with continual offers of 

upgrades and system configuration 

_Open system components


Overview 

ceramill mall 

overview of the wide range of materials and 

applications covered by ceramill mall 

ceramill Framework 

units: 

ceramill ZI units 

(zirconium oxide) 

ceramill tI 

grade 2 units 

(Titan) 

ceramill tI 

alloy units 

(TialNb) 

ceramill nP L units 

(cocr – laser sintered) 

ceramill gcer units 

(glass ceramic, leucite 

reinforced) 

ceramill comP units 

(composite) 

ceramill temP units 

(dyed Pmma) 

ceramill Pmma units 

(acrylic which burns out 

without residue) 

the most important features 

at a glance: 

_ high strength, rigidity, and 

biocompatibility 

_ On request tooth coloured 

framework by staining 

_ conventional and adhesive 

fixation 

_ high strength, rigidity, and 

biocompatibility 

_ homogenous structure 

_ industrially pre-fabricated 

material, no casting defects 

_ high strength, rigidity 

_ complex frameworks possible 

_ beryllium and nickel-free 

_ high aesthetics 

_ high strength 


material 

_ Nano composite 

_ high flexural strength 

_ metal-free 

_ ready-made material from 

industrial production 

_ Dyed resin 


material 

_ Transparent acrylic 

_ burns out without leaving a 

residue 


material 

the most important 

indications: 

_ crowns and bridges in the 

anterior and posterior region 

_ Telescope and conical crowns 

_ abutments and attachments 



_ 2 pontics 





_ For veneering with conventional 

metal bonding porcelains 

_ Frameworks for veneering or 

fully anatomical 

_ inlays, Onlays, veneers 

_ Single crowns 

_ For conventional and 

adhesive fixation 

_Permanent prostheses: 

up to 3 unit briges 

_Temporary appliances: 

up to 14 unit bridges, 

2 intermediate elements 

_ Suitable for veneer bonding 

_ Temporary appliances 

_ 2 intermediate elements 

_ Suitable for veneer bonding 

_ Temporary, frameworks which 

can be veneered 

_ Framework for casting technique 

and press-on technique 

F | 5

F | 6 


Overview 

outsource digital 

SCANNEN 

CAD 

UPLOAD 

CAM SOFT 

CNC 

POSTAGE 

The entire 



d-lab24 .com 



method 

model and bite registration are scanned in 

the ceramill map scanner. 

The scan is downloaded into the caD Software 

ceramill mind. The bridge construction 

is designed automatically. it is possible for 

the operator to make manual alterations. 

at the click of a button the saved 

construction data are sent to the 

ceramill m-center. 

after the data input control, the construction 

is assigned, according to material, to the 

designated manufacturing technique and 

the production process is calculated. 

The construction is then produced either by 

milling with a cNc milling machine or using 

the laser melting technique. 

after the quality control the framework is 

packaged and dispatched. 

d-LaB 24 

Digital instructions, videos, forums 

and much more training material on 

aG methods. 

P | 16 

PerFormance-Box 

Outsource 

Digital 

Inhouse 

Digital 

SyStemS and ProductS 

outSource dIgItaL 

F|10 

_low-cost entry due to partially automatic 

features as opposed to fully automatic 

_easy re-scanning possible 

_main application: Small pieces of work 

(up to 6 units, larger pieces of work are 

also possible) 

F|11 

_Fully automatic scanner, also registers 

bridges up to 14 units quickly and easily 

_compatible with the virtual articulator 

artex ® cr for automatic, full anatomical 

framework design. 

_accurate and quick recognition of the 

preparation margin 

_intuitive dental technical work-flow 

which provides easy operation 

_Zirconium oxide milled and sintered 

in the ceramill m-center 

_cocr bridges produced using 

laser-melting techniques in the 


know-how-Box P | 5 ProFIt-Box P | 21 ServIce-Box P | 23 

Inhouse 

Manual 

F|12 

F|14 

F | 14


Overview 

inhouse digital 

The entire 



d-lab24 .com 



method 

Filling out the order with type of 

indication, material and colour. 

Scanning the model using the ceramill 

map100 

constructing the bridge using caD 

software ceramill mind 

Placing the construction in the desired 

blank, adaptation of bars and calculation 

of milling paths. 

milling the construction in the milling 

machine ceramill motion 

Stained and sintered bridge 

d-LaB 24 



aG methods. 

P | 16 


Outsource 

Digital 

Inhouse 

Digital 

InhouSe dIgItaL 


Inhouse 

Manual 


F|10 

_low-cost entry due to partially automatic 

features as opposed to fully automatic 

_easy re-scanning possible 

_main application: Small pieces of work 

(up to 6 units, larger pieces of work are 

also possible) 

F|11 

_Fully automatic scanner, also registers 

bridges up to 14 units quickly and easily 

_compatible with the virtual articulator 

artex ® cr for automatic, full anatomical 

framework design. 

_accurate and quick recognition of the 

preparation margin 

_intuitive dental technical work-flow 

which provides easy operation 

F|12 

F|13 

_automatic nesting in the cam software 

ceramill match for efficient use of blanks 

F|13 

_For dry finishing zirconium oxide and 

acrylic 

_mills up to 14 unit bridges 

_Optimised milling process, lower milling 

times, high productivity 

F | 7

F | 8 


Overview 

inhouse manual multi-x 

The entire 



d-lab24 .com 



method 

Starting situation: model in the articulator 

artex ® cr; 

The stumps are removed and isolated with 

ceramill Sep. 

in order to fabricate the coping, ceramill 

Gel is applied systematically to the die and 

then polymerised with the ceramill Uv. The 

coping is positioned and fixed in the retaining 

plate. This is placed along with the 

ceramill Zi blank into the ceramill milling 

machine. 

The coping is milled with a variety of 

burs tools, first from the inside then 

the outer surface, while the 

pre-fabricated coping is simultaneously 

scanned with a sensor device. 

after having removed the cap from 

the blank, it can be optionally colored 

in various shades by means of 

ceramill liquid. 

For sintering, the caps are placed onto 

the sintering beads, the sintering bowl put 

into the ceramill Therm furnace and the 

sintering programme started. 

after fitting and finishing of 

the caps, they are checked in the 

articulator artex ® cr. 

d-LaB 24 



aG methods. 

P | 16 


Outsource 

Digital 

Inhouse 

Digital 


manuaL ZIrconIum oxIde ProceSSIng 


Inhouse 

Manual 

F|15 

_The spherical shell table and vertical 

pantograph open up a whole new range 

of indications that had previously only 

been possible in metal 

F|19 

_extremely high bending strength, 

optimal edge stability and machinability 

_The plastic frame makes insertion into 

the milling machine simple 

_No connectors on the friction plane 

in the pre-sintered state. 

_Finishing time is reduced in 

sintered state 

F|24 

F|25 

_light-curing modelling material 

_easy dosage and application due to thin 

flowing and malleable consistency 

F|17 

_maximum process reliability due to constant 

temperature control and even temperature 

distribution in the firing chamber 

_automatic sintering sequences and one 

adjustable sintering program.


Overview 

inhouse manual cast 

The entire 



d-lab24 .com 



method 

Starting situation: model in the articulator 

artex ® cr. The stumps are removed, isolated 

and the wax cap produced. 

The coping with its reduced anatomical 

shape is modeled in the articulator with the 

Smart-wax Duo modeling device. 

after having fixed the caps, the investment 

Giroinvest Super is metered with the Smartbox 

invest and mixed with the Smartmix. 

The caps are subsequently invested; the 

completely hardened mold is preheated and 

casted with the Girobond Soft alloy. 

after having removed the casted caps, the 

sprues are removed and linished. 

after fitting on and finishing of the caps, 

they are controlled in the articulator 

artex ® cr. 

d-LaB 24 



aG methods. 

P | 16 


Outsource 

Digital 

mILLIng 

Inhouse 

Digital 


Inhouse 

Manual 


caStIng 

_Precise, reproducible results due 

to automated metering and constant 

cooling of the components 

_Saves time and material 

F|26 

F|34 

_Duo-Option, this means two handpieces 

are simultaneously ready for use and 

quickly heated 

_Simple, easy and safe tool change during 

operation 

F|27 

F|32 

_Universal investment suitable for a wide 

range of indications due 

to stepless expansion from 1.2 to 4.0 vol % 

_Phosphate-bonded precision investment 

material for model casting 

F|29 

F|30 

F|31 

_3 alloys for the whole spectrum of crown 

and bridge works as well as removable 

dental prostheses 

F|36 

_high-precision milling machine. Due to its 

modular construction it can be used for 

surveying or blocking out 

F|37 

_Parallelometer. Due to its modular 

construction it can be used for blocking 

out or milling 

F | 9

F | 10 


SySTem-cOmPONeNTS 

ceramill map100 

the part-automatic entry-level scanner – 

uncompromising scanning quality 

all scanners in the ceramill 

map range are characterised 

by their high resolution data, 

which is generated by the 

strip light projection. highly 

sensitive 3D sensors ensure 

of highly accurate images of 

the model (< 20 μm). 

another standard quality is 

the functional range of the 

background software: apart 

from scanning the model, it is 

also capable of scanning the 

bite registrations, gingiva and 

wax-ups. 

The low-cost basic scanner 

ceramill map100 is ideally 

equipped for 90% of all prosthetic 

restorations 

(6 units). larger restorations 

are also possible. 

The scanning field comprises 

50x36x40mm. The model is 

positioned by hand. The end 

position can be checked live 

on the monitor. 

_The automatic axis has been replaced by a manually manoeuvrable axis, thus 

providing the low entry-level price 

_The model can be adjusted by hand in the scanner. re-scanning takes place with 

just one mouse click 

_The model, the live image on the monitor and the constructed scan all move 

synchronously so that the missing areas can be directly re-scanned 

_Scanning can take place while the door is open due to the strip light projection 

_main application: 1-6 unit bridges, 14 unit bridges also possible 

_bite registration, gingiva and wax-up scan possible for optimised framework fabrication 

_The scanner comes with an open interface, scans (stl-files) can also be downloaded 

into other caD software 

The model can be adjusted in the 

scanner by hand. Side effect: waiting 

times during the scanning process 

are reduced. 

when the model is turned in the 

scanner, the live image and the scan 

also turn automatically on the monitor. 

Outsource 

Digital 

Inhouse 

Digital 

Inhouse 

Manual 

+ 

Scan and live image – easy re-scanning 

via mouse-click or button on the 

scanner.



ceramill map300 

the fully automatic scanner – 

uncompromising quality and handling 

apart from the same qualities 

as the map100, the ceramill 

map300 is particularly characterised 

by its ease of use. 

The scan field is identified 

and assessed automatically, 

which means that large 

spanned bridge frameworks 

can be quickly and efficiently 

documented. 

articulated models can also be 

easily processed by this type – 

one of the prerequisites when 

the“ virtual articulator” 

comes into action with the 

construction software. 

_The fully automatic strip light scanner scans up to 14 unit bridges quickly and easily 

_articulated models can be scanned in relation to the articulator, then downloaded 

into the caD software in the artex ® cr for the automatic fabrication of fully 

anatomical frameworks 

_bite registration, gingiva and wax-up possible for optimal framework fabrication 

_automatic user-guidance through the scan programme for easy and safe operation 

_The scanner comes with an open interface, scans (stl-files) can also be downloaded 

into other caD sortware 

articulated models in the artex ® cr articulated models positioned by 

Splitex ® in map300 

Outsource 

Digital 

Inhouse 

Digital 

Inhouse 

Manual 

Scanned models in the virtual articulator 

artex ® cr in the caD software 

ceramill mind 

+ 

F | 11

F | 12 



ceramill mind 

the Intelligent construction Software – 

the “spirit“ of framework fabrication 

a software which is designed 

to follow the dental technical 

work-flow is the main 

prerequisite for the greatest 

possible acceptance of a 

digital medium. The caD software 

ceramill mind was developed 

in close collaboration 

with dental technicians - and 

its further development is 

confirmed. its contents leave 

nothing to be desired: Precise 

recognition of the prepared 

margin, automatic bridge and 

connector design, tooth library 

compilation and the open 

system structure are just some 

of the highlights. 

_large indication spectrum (fully anatomical and anatomically reduced crowns and 

bridges, inlays/onlays, reducing wax-ups, press-over, telescopes, virtual articulator) 

_intuitive dental technical work-flow for comfortable and reliable use 

_The virtual articulator simulates the mandibular excursions and automatically 

constructs a full anatomical framework proposal, according to the dynamic occlusion, 

therefore reducing the necessity to grind the surfaces after milling 

_The order button integrated in the programme makes sending the 

construction data simple 

_Open for every type of construction data (File type: stl), increases flexibility 

_Open interface 

Outsource 

Digital 

Inhouse 

Digital 

anatomically reduced bridge inlay virtual articulator artex ® cr 

Inhouse 

Manual 

+

Ceramill mall Framework management 

SySTem-COmpOnenTS 

ceramill motion 

the compact milling machine – for quick and precise 

framework fabrication in zirconium oxide and acrylic 

The zirconium oxide framework 

milling machine Ceramill 

motion gets things moving. 

Clean, efficient and precise - 

this Cam unit mills most 

framework situations in the 

laboratory. 

The Ceramill match transfers 

the construction data into 

milling data at lightning 

speed, and the units to be 

milled are automatically 

arranged efficiently within 

the blank (nesting). 

The compact external 

dimensions and an appealing 

design make the Ceramill 

motion an attractive looking 

work horse to have in the 

laboratory. 

_ Dry milling of zirconium oxide and acrylic 

_mills up to 14 unit bridges 

_Optimised milling process, therefore lower milling times, high productivity 

_Small amount of space required, fits into every laboratory 

_The blanks from the Ceramill System can be used – quick click insertion 

_ Tool holding fixture with automatic tool changer 

_Open interface for an open scanner 

_automatic nesting by Cam software Ceramill match for efficient use of blanks 

Cam-Software Ceramill match Tool holding fixture with automatic 

tool changer 

Outsource 

Digital 

Inhouse 

Digital 

NEW – available by end of 2009 

milled zirconium oxide blank 

Inhouse 

Manual 

+ 

F | 13

F | 14 

Framework management Ceramill mall 



the milling center for all indications and materials: 

Versatile, reliable and fast 

The prosthetic restoration 

still bears the individual technician’s 

signature – the milling 

center will only produce 

a piece of work which has 

been previously approved by 

him. 

a procedure using state-ofthe-art 

technology and specially 

trained processing engineers. 

not without dental 

technical quality control, 

which takes place before the 

finished framework is dispatched. 

naturally, various aG support 

media is available on all 

aspects in the Ceramill 

m-Center: Online help, tracking 

the status of each order, the 

Ceramill help desk. 

_The wide spectrum of different materials available (zirconium oxide, 

glass ceramic, CrCo, titanium, composite, pmma) cover almost the entire 

framework fabrication spectrum 

_a variety of indications (anatomically reduced and fully anatomical crowns 

and bridges, telescopes, inlays/onlays, pressable techniques) 

_Test samples via model dispatch possible 

_Quick processing times – good planning safety 

_State-of-the-art production techniques produce optimal and 

precise frameworks 

laser melting machine Our colleague at the 

Ceramill Helpdesk 

Outsource 

Digital 

Inhouse 

Digital 

Finished framework ready for 

dispatching to laboratory 

Inhouse 

Manual 

+




the zirconium oxide winner for 

a wide range of indications 

Vertical milling using the 

pantograph with unlimited 

movement, the spherical 

shells make the multi-x an 

indication champion for 

zirconium oxide. 

Completely new indications 

that have currently only been 

possible in metal. 

_ also available as an upgrade for every Ceramill Base 

_ Vertical pantograph – even and smooth surfaces also possible in vertical surfaces 

_ Quick and easy to determine the angle of insertion with the moveable 

spherical shell tables 

_ The vacuum held spherical shell tables and thus the fixing of the milling position 

may be activated through the foot pedal 

_ maximum workflow 

_ Variable and precise setting of the enlargement factor using the micrometer screw 

_ Working table fixture for quick blank insertion 

_ Clean processing of the zirconium blank using integrated blast and 

extraction equipment 

easy processing of undercuts by 

tilting the spherical shell table 

included in delivery: level for the 

horizontal alignment of abutments 

Outsource 

Digital 

Inhouse 

Digital 

Inhouse 

Manual 

Zirkon 

a easy and highly precise setting of 

the enlargement factor is feasible by 

making use of the micrometer screw 

+ 

F | 15

F | 16 




Vertical Pantograph 

Simple vertical processing 

Whether a bar construction, 

attachment arms or telescope 

crowns with emergence 

profiles – when it comes to 

milling and drilling vertical 

surfaces, the vertical pantograph 

is the right solution. 

Here are its highlights at a 

glance: 

_ no angle movement 

_ precision optimisation 

during milling 

_ milling vertical surfaces 

such as bars, telescopes, 

attachment arms, attachment 

brace supports and 

screw channels are all possible. 

Simple and precise: 

the enlargement factor 

milling a screw 

seat using a 

milling machine 

with angle 

movement 

milling a screw 

seat using a 

milling machine 

without angle 

movement 

Setting the enlargement factor 

The enlargement factor is read off at the blank and selected 

on the machine. 

the effect of the enlargement factor 

Crown = female part | Stump = male part 

reduced 

factor 

= wider fit 

Factor 

Original 

factor 

= ideal fit 

enlarged 

factor 

= tighter fit 

Spherical shell table 

Simple sliding of the spherical shells 

The spherical shell table 

construction of the new 

Ceramill multi-x allows free 

and unhindered gliding movement 

in every desired position. 

The spherical shell table 

is fixed in position by vacuum, 

which is easily activated 

by the foot pedal. The insertion 

angle is therefore not only 

quick to find, but also very 

simple and efficient. 

reading the printed enlargement 

factor from the blank 

inlay = male part | Stump = female part 

reduced 

factor 

= tighter fit 

Original 

factor 

= ideal fit 

Outsource 

Digital 

Inhouse 

Digital 

installing the enlargement factor in 

the Ceramill multi-x 

enlarged 

factor 

= wider fit 

Inhouse 

Manual 

Zirkon



ceramill therm 

a fully automatic, high performance furnace 

for the final sintering of stress-free frameworks 

The Ceramill Therm is a high 

temperature furnace with 

additional features. 

The milled Ceramill zirconiumoxide 

frameworks are densesintered 

with the Ceramill 

Therm and thus obtain their 

final density and the resulting 

excellent material properties. 

For sintering, the objects are 

placed onto sintering beads, 

which ensures a frictionless 

sintering process and thus 

distortion-free frameworks. 

The Ceramill Therm offers 

maximum process reliability 

due to constant temperature 

control, even temperature 

distribution in the firing 

chamber and notification in 

case of termination of the 

sintering programme due to 

e.g. power failure. as a result 

of this, the user is able to 

safely control if the final 

density and thus strength of 

the frameworks has been 

achieved. 

The user has 4 sintering programme 

locations at his 

disposal; one of them can be 

individually programmed. 

Outsource 

Digital 

Inhouse 

Digital 

_ maximum process reliability due to constant temperature control, even temperature 

distribution in the firing chamber and notification in case of termination of the sintering 

programme 

_maximum process reliability due to optimally coordinated, fully-automated sintering 

programmes for different restoration sizes 

_ 4 sintering programme locations; one of them individually programmable by the user 

_ 2 stackable sintering bowls for maximum utilisation of the furnace 

_ minimum required space and installation time (supply required) 

Inhouse 

Manual 

Zirkon 

For maximum utilisation of the 

furnace, the Ceramill Therm 

exhibits a large firing chamber, 

in which 2 sintering bowls can 

be stacked on each other and 

thus the double amount of 

frameworks can be sintered in 

one cycle. With the aid of the 

sinter forceps, the sinter shell 

can be transferred easily and 

safely in and out of the furnace. 

+ 

F | 17

F | 18 



ceramill zi 

Presintered Y-tZP zirconium-oxide blanks for machining 

without risk of splintering or damaged edges 

The pre-sintered blanks can 

be perfectly machined – they 

do not splinter and offer 

excellent edge stability. all 

blanks are marked in batches 

with their individual enlargement 

factors, which are later 

transferred to the milling unit 

Ceramill. 

The blanks are secured in a 

special plastic frame, which, 

by simply clicking into place, 

can be instantly inserted into 

the fixture within the working 

table. Thus, the real work can 

be started without time-consuming 

preparation. 

_ extremely high bending strength, optimal edge stability and machinability 

_ Due to their reusability, the blanks can be used efficiently so that unmachined 

areas can be processed later 

_ extremely wide range of indications due to different blank sizes 

_ Optimal fitting due to encoded indication of the enlargement factor on the blanks 

_ individual coloring due to 4 different degrees of brightness of the Ceramill liquid 

dying solutions 

_ Can be used with all usual zircon veneering ceramics 

accurately milled abutments 

idoma Zahntechnik, 

Tino Hauptmann, Berlin 

pre-sintered bridges made from zirconium 

oxide, milled by participants of 

the Ceramill beginner’s course 

Outsource 

Digital 

Inhouse 

Digital 

Inhouse 

Manual 

Telescope crowns milled with the 

Teleskopkit, mDT mr. V. Schmidt, 

Dialog Zahntechnik, Wiesbaden 

Zirkon 

+



ceramill zi 

Complex, but necessary - Quality assurance, testing 

procedures of Ceramill blanks from amanngirrbach 

Zirconium oxide can be processed 

in pre-sintered condition, 

which gives more and 

more users the opportunity 

to manufacture cost-efficient 

and precise dental frameworks 

with manual copy milling 

machines in their own 

laboratories. However, zirconium 

oxide blanks of consistent 

quality are a prerequisite 

that largely affects the final 

result. 

This was the deciding factor 

for amannGirrbach for the inhouse 

production of zirconium 

oxide blanks for the 

Ceramill. 

at amannGirrbach, the zirconium oxide blanks go through strict testing procedures according 

to stipulated parameters before, during and after the production process. The first step involves 

an intensive examination of the raw material powder whereby the following characteristics 

are tested: 

_ green density 

_ white density 

_ Final density 

_ Bending strength 

_ Vickers hardness 

_ enlargement factor (sintering shrinkage) 

_ Porosity 

_ Visual examination 

_ microstructure (Sem images) 

Outsource 

Digital 

Inhouse 

Digital 

Inhouse 

Manual 

Zirkon 

This test sets the basic fundamentals for an optimal adaptation and control of the production 

process. in the following finishing phase, the green density, white density and the enlargement 

factor for every blank batch is repeatedly assessed. This allows amann Girrbach a quality assured 

production process for consistently high material performance. 

F | 19

F | 20 



Quality Control – 4 Point Bending test 

by amanngirrbach 

“Flexural strength”, the physical characteristic of dental 

ceramics is determined by the resistance of a testing 

object to pressure at the moment of fracture. a more 

simple explanation, the flexural strength measurement of 

a ceramic material is the moment at which the material 

fails. 

result: 

at approx. 1300 mpa flexural strength, Ceramill Zi lies in 

direct competition with the leading specialists. 

The higher the Weibull-modulus the more homogenous 

the material and the closer the measured strength values 

(i.e. in a test row with a 4 point bending test). The higher 

the Weibull-modulus the more exact and reliable the 

stress prediction at which a material will fail. 

a Weibull-modulus of 10 and above is sufficient for a high 

degree of reliability 

result: 

ceramill zi 

the weibull-modulus m is a measurement 

for the reliability of a material 

Ceramill Zi has an excellent Weibull-modulus of 14.2 and 

therefore proves a high degree of reliability during use. 

4-point bending strength (63,21%) [MPa] 

Weibull modul m 

(University hospital Munich, Dr. Beuer et al.) 

1400 

1200 

1000 

800 

600 

400 

200 

0 

15 

10 

5 

0 

1279 

1200 

1155 

1100 

1050 

Ceramill ZI Competitor Competitor Competitor Competitor 

I 

L 

14,2 

F 

11,8 

H 

B 

Schematic diagram of a testing 

mechanism 

10,7 

7,2 

Ceramill ZI Competitor Competitor Competitor 

Sem image of Ceramill Zi 

_ even grain distribution 

_ Optimal homogeneity 

_ High Weibull-modulus 

Outsource 

Digital 

Inhouse 

Digital 

Inhouse 

Manual 

Zirkon



ceramill zi – for multi-x and motion 

optimum area utilization 

compared to 

With the Ceramill Zi Blank preforms, 31, 51, 71 and 77 from amannGirrbach, the actual blank surface area is also the effective 

working area. This is due to the holding frame, which allows the framework to be milled up to the outer most edge. The milling 

path can be outside the blank on all side, i.e. in the plastic frame. 

Blank Holding frame area utilization advantage 

ceramill zi preforms 

ceramill zi 31 

ceramill zi 51 l 

ceramill zi 71 l 

ceramill zi 77 l/Xl 

1 

6 

1 

1 2 

2 

3 4 5 6 7 

8 9 10 11 12 13 

14 15 16 17 18 19 20 

21 22 23 24 25 26 

27 28 29 30 31 32 33 

8 

3 

9 

1 

2 

7 

4 

1 2 

10 

2 

5 

11 

3 

3 4 5 

8 9 10 

14 15 16 17 18 19 20 

21 22 23 24 25 26 27 

28 29 30 31 32 33 34 

6 

7 

12 13 

35 36 37 38 39 40 

41 42 43 

Outsource 

Digital 

Inhouse 

Digital 

_ The ideal blank for single 

copings and abutments 

_ available in 2 different sizes 

_ Single units can be processed 

in half the time 

_ Designed exactly according to 

the course of the dental arch 

_ The ideal blank for large 

spanned bridges 

_ Covers up to 90 % of all 

work in a laboratory, with 

no material wastage 

_ For all large spanned 

bridges, which are too 

wide or high for the Zi 71 

Inhouse 

Manual 

Zirkon 

+ 

_ The ideal blank for large 

crowns and small bridges + 

_ The ideal blank for medium 

sized to high bridges + 

+ 

+ 

F | 21

F | 22 



ceramill zi cam – for open CaD/Cam systems 

Ceramill Zi Cam – pre-sintered Y-tZP blanks 

for dental restorations 

The Ceramill Zi Cam blanks from amannGirrbach are available as a standard blank assortment for open milling systems with 

special sizes available on request. an optimised production process and continual quality control guarantee a high standard 

of material. 

Blanks Usage 

ceramill zi cam 40x20x16 (mm) 

ceramill zi cam 98x X (X= 10, 14, 18, 20, 25 mm) 

ceramill zi cam 98x X n (X= 10, 14, 18, 20, 25 mm) 

_For open Kavo and Digident systems 

_ For free milling machines 

_ X=10 also for open Wieland systems 

_ For free milling machines and open Wieland systems 

+ 

+ 

+



ceramill roto 

High-precision, long-life sensing and 

milling tools for cost-effective machining 

of Ceramill blanks 

item no. Desc. geometry sketch area of application 

760801 Ceramill Roto T4 t4 

Ceramill Roto T4 

760701 Ceramill Roto F4 T4 F4 

Ceramill Roto F4 



760831 Ceramill Roto T3 T4 

Ceramill t3 

Ceramill Roto T3 F4 T4 


760731 Ceramill Roto F3 F4 

Ceramill Roto F3 T3 F4 F3 



Ceramill 

Ceramill Roto 

Ceramill Roto 

F3 

Ceramill Roto T2 T3 

760821 Ceramill Roto Roto F3 T2 T3 t2 

Ceramill Roto Roto F3 F2 T2 

760721 Ceramill Roto F3 F2 

Ceramill Roto T2 F2 


Ceramill 

Ceramill Roto 

Roto T1,2 T2 

Ceramill Roto T1,2 F2 T2 

Ceramill Roto T1,2 

760811 Ceramill 

Ceramill Roto 

Roto t F1,2 F2 

Ceramill Roto F1,2 T1,2 F2 1.2 

Ceramill Roto F1,2 


760711 F 1.2 

Ceramill 

Ceramill 

Ceramill Roto 

Roto 

Roto T0,9 

F1,2 

Ceramill Roto T0,9 T1,2 

Ceramill Roto T0,9 F1,2 T1,2 

Ceramill Roto Roto T0,9 F1,2 

Ceramill Roto T0,9 F1,2 

760809 Ceramill Roto t T0,9 0.9 


Ceramill 

Ceramill Roto 

Roto T0,6 T0,9 

760709 Ceramill Roto F T0,6 T0,9 0.9 


Ceramill 

Ceramill Roto 

Roto Roto F0,6 T0,9 

Ceramill Roto F0,6 T0,6 T0,9 

Ceramill Roto F0,6 



Ceramill 

Ceramill Roto 

Roto 

Roto t CT2 

F0,6 

Ceramill Roto CT2 T0,6 0.6 

Ceramill Roto CT2 F0,6 T0,6 

760751 Ceramill Roto F CF2 CT2 F0,6 0.6 

Ceramill Roto CF2 F0,6 

Ceramill Roto CT2 

Ceramill Roto CF2 

Ceramill Roto CT2 

760840 Ceramill Roto Ct CF2 CT2 2 

Ceramill Roto CF2 

760740 Ceramill Roto CF CF2 2 

Ceramill Roto KT2,5 

760891 Ceramill Roto kt 2.5 KT2,5 KF2,5 

Ceramill 



Ceramill Roto 

Roto 

Roto kF 2.5 KF2,5 

KT2,5 

KT2,5 

Ceramill Roto KT2,5 KT 1.8 

Ceramill Roto KF2,5 

Ceramill 

Roto 

Roto 

KF2,5 

KF2,5 

Ceramill Roto KT KF2,5 KF 1.8 

760892 kt 1.8 


Ceramill 

Ceramill KT 1.8 

Ceramill Roto 

Roto 

Roto KF 

KT 

KT ST2 1.8 

1.8 

1.8 

760792 Ceramill Roto kF KT 1.8 1.8 

Ceramill Ceramill Roto KF 1.8 

Ceramill 

Ceramill Roto 

Roto 

Roto 

Roto KF2,5 

KF 

ST2 KF SF2 

KT2,5 1.8 

1.8 

Ceramill Roto KF 1.8 

760861 Ceramill Roto ST2 

Ceramill 

Ceramill Roto 

Roto 

Roto St KT 

SF2 

ST2 KF2,5 21.8 

Ceramill Roto ST2 

Ceramill Roto ST2 ST1,2 

760761 Ceramill Ceramill Roto SF SF2 

Ceramill Roto 

Roto KF SF2 

SF2 KT 21.8 

1.8 

Ceramill Roto ST1,2 SF2 SF1,2 

Ceramill 

Ceramill Roto ST1,2 

Ceramill 

Ceramill 

Ceramill Roto 

Roto 

Roto 

Roto ST2 

SF1,2 

ST1,2 

KF 1.8 

760871 Ceramill Roto St ST1,2 1.2 

Ceramill 

Ceramill Roto ST1,2 ST0,6 

Ceramill 

Ceramill Roto 

Roto 

Roto SF2 

SF1,2 

ST2 

760771 Ceramill Roto SF SF1,2 1.2 

Ceramill Roto ST0,6 SF1,2 SF0,6 

Ceramill 

Ceramill 

Roto 

Roto 

ST1,2 

SF2 


Ceramill 

Ceramill 

Ceramill Roto 

Roto 

Roto SF0,6 

ST0,6 

ST0,6 


Ceramill Roto St 0.6 UT2 ST0,6 

Ceramill 

Ceramill Roto 

Roto 

Roto SF1,2 

SF0,6 

Ceramill Roto 

SF0,6 

ST1,2 

SF0,6 

760781 Ceramill Roto SF 0.6 UT2 SF0,6 UF2 

Ceramill 

Ceramill 

Ceramill 

Roto 

Roto 

Roto 

ST0,6 

SF1,2 

UT2 

Ceramill 

Ceramill 

Ceramill 

Roto 

Roto UT2 

UT2 UF2 

Ceramill Roto UT2 

760830 Ceramill Roto 

Ceramill Roto Ut UT3 

Ceramill Roto 

Roto SF0,6 

UF2 3 

Ceramill Roto 

UF2 ST0,6 

UF2 

Ceramill Roto UF2 

760730 Ceramill Roto UF UT3 UF3 

Ceramill Roto UT2 SF0,6 3 


Ceramill 

Ceramill 

Ceramill Roto 

Roto 

Roto UF3 

UT3 

UT3 

Ceramill Ceramill Roto TT2 UT3 



Ceramill Roto Ut UT2 

UF3 

Ceramill Roto 

UF3 2 

UF3 

Ceramill Roto TT2 TF2 UF3 

760720 Ceramill Roto UF UF2 

Ceramill Roto UT3 2 

Ceramill Roto TT2 

Ceramill 

Ceramill 

Ceramill Roto 

Roto 

Roto TF2 

TT2 

TT2 


Ceramill Roto 


Roto TF2 UT3 

Ceramill Roto 

TF2 

TF2 

Ceramill Roto TF2 


760819 Ceramill Roto tt2 TT2 

760719 Ceramill Roto tF2 TF2 TT2 


_ efficient, economically viable processing of Ceramill blanks, 

with long working life and optimal milling geometry 

_ available in 1.2 mm, 2 mm and 3 mm sizes, and additional 

special patterns 

_ material removal and dust removal are optimally controlled 

due to the tool geometry tailored to the material 

_ extensive assortment of milling cutters for the management 

of a wide range of indications 


Tools with face Ceramill radius Roto KT2,5 for rapid, rough removal of material (“roughing”). 

Ceramill Roto KF2,5 KT2,5 

Ceramill Roto KF2,5 


Ceramill 

Ceramill Roto 

Roto KT 

KF2,5 

Ceramill Roto KT2,5 1.8 

Standard tools Ceramill (face Roto radius) KT KF2,5 KT2,5 1.8 for removing material to create the 

Ceramill Roto KF 1.8 

framework shape Ceramill and Roto KT KF2,5 machine 1.8 the rough outline. 

Ceramill Roto KF KF2,5 1.8 

Ceramill 

Ceramill 

Ceramill Roto 

Roto 

Roto ST2 

KT 1.8 

Ceramill Roto ST2 KF 1.8 

Ceramill Roto ST2 KT 1.8 

Standard tools Ceramill 

Ceramill (face 

Ceramill Roto 

Roto radius) 

Roto SF2 

KF KT 1.8 for the machining of areas for which 

Ceramill Roto SF2 ST2 

Ceramill Roto SF2 KF 1.8 

the diameter Ceramill of the Roto T/F3 ST2 KF 1.8 tools is too large and too the diameter of 

Ceramill 

Ceramill 

Ceramill Roto 

Roto 

Roto ST1,2 

SF2 

the T/F1.2 tools Ceramill is too Roto small, ST1,2 ST2 e.g. deep front teeth crowns. 

Ceramill Roto ST1,2 SF2 ST2 

Ceramill Roto SF1,2 ST1,2 SF2 

Standard tools Ceramill (face Roto radius) SF1,2 SF2 for finishing of details, e.g. incisal/occlusal 


Ceramill 

Ceramill 

Ceramill Roto 

Roto 

Roto ST0,6 

SF1,2 

areas and crown Ceramill edges. Roto ST0,6 ST1,2 most of the crown and bridge works can be 

Ceramill Roto ST0,6 SF1,2 ST1,2 

rendered by Ceramill means Roto Roto of SF0,6 ST0,6 SF1,2 this tool. 

Ceramill Roto SF0,6 SF1,2 


Tool with face Ceramill 

Ceramill Roto 

Roto UT2 SF0,6 

Ceramill radius Roto for UT2 ST0,6 intricate geometries such as e.g. incisal 

Ceramill Ceramill Roto UT2 SF0,6 ST0,6 

areas in case Ceramill of long 

Ceramill Roto front 

Roto UT2 UF2 teeth crowns. Can also be used as oversize 

Ceramill Roto UF2 SF0,6 

or under-size Ceramill Roto UF2 

Ceramill tool in Roto 

Roto combination SF0,6 

UT2 with the 1.2 or 0.6 tools. 


Ceramill 

Ceramill Roto Roto 

UT2 UT3 

Ceramill Roto 

Roto UT2 

Thin tool with face radius UT3 UF2 for particularly intricate geometries, e.g. 

Ceramill 

Ceramill Roto 

Roto UF3 UT3 

UF2 

incisal surfaces Ceramill 

Ceramill of Roto 

Roto long UF3 

UF2 front teeth crowns, inlays, adhesive bridges, 


veneers and Ceramill Roto UF3 

Ceramill the like. Roto TT2 UT3 

Ceramill Roto TT2 UF3 UT3 

Ceramill Roto TF2 TT2 UF3 

2° -tapered Ceramill tool for Roto machining TF2 UF3 conical surfaces, e.g. conical crowns and 


other conical Ceramill Roto TF2 

Ceramill support Roto TT2 elements. 

Ceramill Roto TF2 TT2 


Ball tool for Ceramill processing Roto TF2 undercuts without having to 

turn/tilt the work piece. 

Fine ball tool for machining tubes and undercuts, without having to 

turn/tilt the work piece. 

Wools without face radius (shank-type tools) are employed for special 

applications, e.g. implant techniques, bar construction and the like. 

Shank-type tools with a medium diameter for milling special geometries, 

e.g. for implant techniques. 

Thin shank-type milling cutter for particularly intricate geometries. 

Outsource 

Digital 

Conical tools with a diameter of 3 mm for machining sharp-edged under- 

cuts and sharp edges in fine bores. 

Conical tools with a diameter of 2 mm for machining sharp-edged 

undercuts and sharp edges in fine bores. 

T-shaped tools with a diameter of 2mm for grinding sharp edged, rightangled 

undercuts and sharp edges within delicately drilled surfaces. 

Inhouse 

Digital 

Inhouse 

Manual 

Zirkon 

+ 

F | 23

F | 24 



ceramill teleskopkit 

Precise friction planes of 

the presintered blanks 

By means of the Ceramill 

Teleskopkit it is now possible 

to fabricate telescope crowns 

with the same precision as in 

metal. The inverse milling 

technique performed in the 

Ceramill machine means milled 

telescope crowns do not 

have the connector on the 

milled surface, but instead on 

the occlusal surface. This 

means the friction planes on 

telescope crowns are already 

smooth and precise in this 

pre-sintered state, which 

reduces the amount of grinding 

necessary with a water 

cooled turbine in the finishing 

phase, and therefore greatly 

reduces danger of microcracking 

within the material. 

With the small cylindrical 

blank for single units, this is a 

system that saves material 

and at the same time offers a 

high degree of accuracy. The 

Teleskopkit was developed in 

collaboration with master 

dental technician mr. V. 

Schmidt. From one technician 

for another one. 

_ it is feasible to produce smooth and precise milled surfaces, in any desired angle, 

in a pre-sintered state 

_ no connectors on the friction plane, thus reducing the amount of grinding necessary 

with a water-cooled turbine in the finishing phase, and therefore greatly reducing the 

danger of micro-cracking within the material 

_ The life expectancy of the prosthetic restoration is increased 

_ The cylinder shaped blank reduces the amount of rough machining necessary 

_ The telescope crowns can be trial-fitted in the patient in the form of resin copings, 

thus minimizing the need for extensive finishing later 

_ even staining of the objects 

_ The patient has a greater sense of aesthetical value 

_ The system can be used in both the Ceramill multi-x and the Ceramill Base 

application of the Teleskopkit in the 

Ceramill multi-x 

Outsource 

Digital 

Inhouse 

Digital 

Inhouse 

Manual 

Zirkon 

Telescope crowns above: Old production 

method, below: production method 

using the Teleskopkit



ceramill gel 

ceramill uv 

ceramill aqua 

Outsource 

Digital 

Light-hardening modelling synthetics for crowns and 

intermediate bridge elements 

_ Cap modelling: Ceramill Gel (green) is of free-flowing 

consistency for simple dosage and application 

_ intermediate bridge elements: Ceramill pontic (blue) has a 

malleable consistency for rapid, individual shaping 

_ low shrinkage for high precision and faster work 

Polymerisation lamp with motion sensor for rapid, reliable 

hardening of modelling synthetics 

_ proximity on/off switch for convenient use and freedom 

from glare 

_ Wavelength carefully matched to synthetic material for 

reliable polymerisation 

_ audible signal at end of controlled polymerising time 

means that polymerisation can be accurately reproduced 

High-precision, light-action parallel milling tool for 

high-performance ceramics 

_ rustles milling tool for post-machining of hardened 

ceramics, with a patented double-joint milling arm 

_ Can be connected via an adapter to any normally 

available laboratory turbine 

_ Detachable splash guard for efficient results without 

risk of contamination 

Inhouse 

Digital 

Inhouse 

Manual 

Zirkon 

+ 

+ 

+ 

F | 25

F | 26 


SySTem COmpOnenTS 

smartbox invest 

optimal precision, processing reliability, ease of use – 

it‘s never been easier to mix the investment material perfectly 

investment material is essential 

for the manufacture of 

dental castings. precise compliance 

with burnout temperatures 

as well as the mixing 

ratio of water, liquid and 

investment material will decide 

subsequent fitting accuracy 

of the final cast product. With 

Smartbox invest, dental technicians 

will have an easy-touse 

measuring device for all 

investment materials at their 

disposal – the first of its kind 

in the world. 

With its integrated cooling 

system and precise measurement 

technology, accurate 

and reproducible mixing 

results can be obtained at 

any time of the year. 

_ investment, liquid and water are automatically dispensed by simply 

pressing a button. This results in reproducible precision 

_ adjustable temperature of all components from 16 to 25°C guarantees a 

consistent expansion for precise fittings at any time of the year 

_ investment cannot be influenced by humidity because of a closed system 

_4 kg capacity for investments in large packs 

_Dust is avoided by connecting an external suction unit 

_ Stores up to 50 easy-to-customize programs 

_ adjustable support for all sizes of blending bowls 

Opening of the fluid container and 

filling of the investment compound 

liquid. The integrated level indicator 

ensures that fluids are available 

The ability to fill large containers 

makes it unnecessary to slit open 

investment bags 

Outsource 

Digital 

Inhouse 

Digital 

Inhouse 

Manual 

metaLL 

The multifunction head ensures 

optimal user convenience in program 

selection 

+


SySTem CompoNeNTS 

giroinvest super 

a precise and controllable universal investment with a wide 

scope of expansion (1.2 to 4.0 percent by volume) 

Unique: 

Giroinvest Super is an investment 

suitable for a wide 

range of applications. it can 

be used for crown and bridge 

works, high-gold-bearing, 

precious metal and nonprecious 

metal alloys. Not 

only the work becomes noticeably 

easier and more 

efficient during the use of 

this investment; storage is 

considerably facilitated as 

well. 

By changing the mixing ratio 

of water and liquid, the expansion 

range can be variably 

adjusted from 1.2 to 4.0 vol %. 

The precise adjustability in 

the lower and upper expansion 

area makes this investment 

perfectly suitable for press 

ceramics as well as non-precious 

metal alloys. 

_ For precious alloys 

_ For non-precious alloys 

_ For press ceramic 

_ For inlays, crowns, and bridges 

_ For conventional heating and shock-heat method 

_ also suitable for ringless systems 

_ extremely wide scope of expansion 

_ Neat and smooth casting surfaces 

_ Flexible and priceworthy use 

_ reproducible casting results 

Setting expansion in % 

3,0 

2,5 

2,0 

1,5 

1,0 

0,5 

0,0 

50 55 60 65 70 75 80 85 90 95 100 

liquid concentration in % 

Outsource 

Digital 

Inhouse 

Digital 

Inhouse 

Manual 

metall 

+ 

F | 27

F | 28 



alloys 

all alloys at 

one sight 

CoCr-alloy NiCrMo-alloy CoCr-alloy Titanium alloy 

Bonding alloys Model casting alloys 

product name girobond nBS girobond CBS girocrom FH girotan l 

Description 

Features 

Technical/physical data 

The proven classical alloy: carbon-free 

CoCrmo bonding 

alloy 

_ excellent laser welding behavior, 

no risk of crack development 

since carbon-free 

_ High homogeneity within the 

batches and good reproducibility 

thanks to the optimized 

production process 

_ Suitable for casting with any 

standard method 

_ Dense surface, good polishability, 

rich shine 

modern NiCrmo bonding alloy 

for crown and bridge work 

_ low hardness (185 HV10) 

_ high strength 

_ good melting and casting 

properties 

_ carbon-free, thus perfectly 

suitable for laser welding 

The ideal CoCr model casting 

alloy 

_ extra-hard quality, fracture- 

resistant clasps 

_ suitable for modelling 

delicate frameworks 

_ easy to model and polish 

(fine-grained structure) 

_ carbon-free, thus perfectly 

suitable for laser welding 

modern Ti6al7Nb-alloy with 

unique chemical and physical 

properties 

_ wider spectrum of indications 

than pure titanium 

_ for crown and bridge works 

_ also for clasp dentures and 

suprastructures 

_ easy to machine and weld 

_ maximum biocompatibility 

_ low thermal conductivity and 

density 

proof stress rp 0,2 % [mpa] 620 400 700 750 

Tensile strengtht rm [mpa] 850 650 880 850 

modulus of elasticity e [Gpa] 210 180 225 110 

elongation at rupture a [%] 14 45 > 5 > 8 

Vickers hardness HV10 330 185 350 325 

Casting temperature [°C] 1510 

melting rangel Solidus [°C] 1350 1270 1346 1650 

melting rangel liquidus [°C) 1422 1356 1388 

Density [g/cm 3 ] 8,6 8,4 8,2 4,52 

CTe 25-500 °C [x 10-6 K-1 ] 

Chemical composition in % 

by mass 

14,1 13,8 10,1 

Co 62,4 Ni 63,5 Co 59 Ti 87 

Cr 25,5 Cr 24 Cr 32 ai 6 

mo 5,1 mo 10 mo 6 Nb 7 

W 5,2 Si 1,3 

Si 1,1 Si 1,5 

other < 1 % Nb, mn mn, N, Nb, W 

Packs 

all amannGirrbach alloys are Ce-certified and free of nickel, beryllium, gallium and carbon. 

50 g Try-me package 781611 781691 721251 

1000 g laboratory pack 781610 781690 721250 

Outsource 

Digital 

Inhouse 

Digital 

764321 

(50 x 20 g ingots) 

764341 

(25 x 40 g ingots) 

Inhouse 

Manual 

metall



340 

330 

320 

310 

girobond ® nbs 

modern niCrmo bonding alloy for 

crown and bridge work 

Girobond ® NBS is a trailblazing 

bonding alloy for the 

crown and bridge technique. 

The specific composition of 

this CoCrmo alloy, with fine 

admixtures but no carbon 

content, provides optimum 

properties for outstanding 

results. 

Hardness HV10 

Comparison of hardness between 

Girobond ® NBS and conventional 

non-percious bonding alloys 

Girobond ® 

NBS 

alloy 

a 

melting behavior of girobond ® nBS 

Begin of the melting; 

the casting cubes melt 

into each other 

alloy 

B 

Comparison of the tensile bond 

strength of metals and ceramics 

requirement in accordance 

with iSo 9693 

50 

40 

30 

20 

10 

0 

according to 

iSo 9693 

Girobond ® 

NBS 

Crack initiation firmness (mpa) 

The molten metal starts 

to burst; However, some 

shadows are still visible 

_ Crmo bonding alloy for the crown and bridge 

technique, free of nickel and beryllium 

_ excellent laser welding behavior, no risk of 

crack development since carbon-free 

_ also suitable as universal alloy for modelcasting 

clasp dentures, wide-span telescopic 

cases, and delicate suprastructures 

_ High homogeneity within the batches 

and good reproducibility thanks to the 

optimized production process 

_ Suitable for casting with any standard 

method 

The surface of the molten 

metal shines; The metal is 

completely molten - Casting 

has to be effected 

immediately 

_ Good controllability of the melting and 

casting process 

_ easy milling (310 HV10) 

_ Dense surface, good polishability, 

rich shine 

_ Completely unproblematic and safe facing 

with conventional facing porcelains which 

suit the coefficient of thermal expansion of 

Girobond ® NBS 14.1 x 10-6K-1 (25-500°C) 

Fine-grained struc ture 

of the niobium-dispersed 

CoC-mo bonding 

alloy Girobond®NBS 

(magnification 100:1) 

Outsource 

Digital 

Inhouse 

Digital 

Inhouse 

Manual 

Girobond ® NBS metal framework 

with porcelain facing 

Dental lab müssle, pforzheim/ 

Germany 

metall 

Coarse-grained structure 

of a conventional 

CoCrmo bonding alloy 

(magnification 100:1) 

+ 

F | 29

F | 30 



girobond ® cbs 

modern niCrmo bonding alloy for 

crown and bridge work 

Carbon-free, type 3 NiCrmo 

bonding alloy for crowns and 

bridges. Due to the dispersion 

with Niobium, Girobond®CBS 

is easy to polish. 

Biocompatible thanks to the 

high mo content. according 

certificates are available. 

(www.amanngirrbach.com) 

Comparison of the metal 

to porcelain compound 

requirement in accordance 

with iSo 9693 

50 

40 

30 

20 

10 

0 

according to 

iSo 9693 

melting behavior of 

girobond ® nBS/CBS 

Girobond ® 

CBS 

Crack initiation firmness (mpa) 

_ Carbon-free NiCrmo-bonding alloy for 

crown and bridge works (type 3) 

_ Good compatibility and reliability just 

like NBS, but softer (HV10 185) and thus 

easier to process 

_ Safe, easily workable, cost-effective 

material 

_ optimised production process ensures 

high homogeneity 

_ easy to cast by any method 

Begin of the melting; the casting 

cubes melt into each other 

The molten metal starts to burst; 

However, some shadows are still 

visible 

Outsource 

Digital 

Inhouse 

Digital 

Inhouse 

Manual 

Girobond ® CBS metal framework 

with porcelain facing 

Dental lab müssle, pforzheim/ 

Germany 

metall 

_ Carbon-free and thus no risk of crack 

formation; perfectly suitable for laser 

welding 

_ Due to a TCe value of 13.8 x 10-6K-1 (25—500°C), bonding of veneering 

ceramics is safe and trouble-free 

_ Corrosion resistance has been proven by 

the Centre of Dentistry, oral medicine 

and maxillofacial Surgery, University of 

Tübingen (Germany) 

_ No overheating of the melt due to melt 

reflection 

The surface of the molten metal 

shines; The metal is completely 

molten - Casting has to be effected 

immediately 

+



750 

700 

650 

600 

550 

500 

girocrom ® fh 

the ideal denture base alloy for the complete 

range of removable dental restorations 

extra-hard, suitable for laser 

welding and easy to model – 

these are the requirements 

on a superior model casting 

alloy. With Girocrom ® FH, 

these requirements have 

become reality – a carbonfree 

alloy with excellent 

mechanical properties. 

laser welding offers dental 

technicians the advantages of 

modern joining technology 

and, at the same time, means 

maximum biological compatibility 

to the patient. Due to 

their carbon content, conventional 

alloys precipitate carbides 

during laser welding. 

These, in turn, have a qualityreducing 

effect on the welding 

seams and involve 

cracks and fractures. 

Proof stress Proof stress Rp 0,2% (MPa) - different CoCr-alloys for partical denture 

710 

< 0,02 

Girocrom 

FH 

Carbon free Containing carbon 

688 

< 0,02 

Competitor 

A 

610 

< 0,05 

Competitor 

B 

_ extra-hard denture base alloy 

_ improved stability 

_ Suitable for all kinds of removable restorations, e.g. metal denture bases, 

combined fixed-removable restorations, telescopic cases, dentures with slide 

attachments or clasps 

_ easily activated clasps at model casting dentures, with minimized fracture risk 

_ Carbon-free and, thus, ideal for laser welding 

_ easy processing and polishing; relatively low Vickers hardness HV10 of 350 

_ excellent biocompatibility and corrosion resistance 

701 

< 0,2 

720 

< 0,8 

Competitor 

C D 

580 

< 0,04 

Competitor 

E F 

679 

< 1,0 

Cracks caused by carbide 

precipitation in a CrComo alloy 

containing carbon 

Outsource 

Digital 

Inhouse 

Digital 

mandibular model casting denture 

with clasps, Dental lab müssle, 

pforzheim/Germany 

girosolder out of CoCr, 3.6 g 

as solder rods 

recommended for soldering of 

CoCrmo alloys 

Inhouse 

Manual 

laser weld without any cracks in 

a carbon-free CrComo alloy 

metall 

+ 

F | 31

F | 32 



giroinvest speed 

the ideal investment for girocrom ® 

restorations 

Giroinvest Speed is a 

phosphate-bonded precision 

investment for the model 

casting technique. 

Outsource 

Digital 

Inhouse 

Digital 

_ phosphate-bonded precision investment for model casting 

_ Can be heated up either with the shock-heat method or conventional 

heating with delay 

_ 30 minutes setting time using the shock-heat method; the mold is subsequently placed 

into the preheated furnace heated up to a maximum temperature of 1050 °C; ready for 

casting after 60 min 

_ Casting without casting ring possible 

_ Smooth casing surfaces and excellent fit due to the shock-heat method 

_ expansion is regulated by adjusting the liquid concentration 

_The large 4 kg package size is based on the capacity of the Smartbox invest 

and therefore makes storage easier 

Inhouse 

Manual 

metall 

+



noflame ® plus 

the “electric Bunsen burner” in the form of compact 

induction heating replaces the open flame 

Within seconds, the modelling 

instrument is heated up in 

the coil opening at very low 

power consumption. 

To be used at any place 

where an electric socket is 

available. 

_ mobile and immediately operational, no gas required 

_ Handling as usual, no adjustment required 

_ eliminates the risks of getting burned or causing fire 

_ No heat emission into the environment; does not consume oxygen 

_ Clean, i.e. no soot particles on instrument and/or material 

_ Saves 75 % of energy expenses; saves the environment 

_ ideal conditions, to be used even at the dental office 

Within seconds, the modelling instrument is heated 

in the coil opening 

Outsource 

Digital 

replaceable protective caps keep 

the coil opening clean 

Inhouse 

Digital 

Inhouse 

Manual 

metall 

+ 

F | 33

F | 34 



smartwax duo 

efficient modeling station for 

working with two handpieces 

This unit is suitable for all 

kinds of modeling and wax-up 

work and is unbeatable in 

combination with the Waxjet 

when making full dentures. 

For each handpiece, 3 different 

temperatures within the 

range of 50-220°/122-428 F 

can be programmed and 

simply switched over. This 

improves the soft and above 

all stress-free treatment of 

the various types of waxes. 

in doing so, the excellent 

thermal conductivity of the 

instrument alloy used for the 

probes (more than 20 times 

the thermal conductivity of 

stainless steel) plays an 

important role as well. 

_ Duo-option, i.e. two different handpieces are ready for use 

at the same time 

_ 3 individually programmable temperatures for each handpiece 

_ Simple and safe exchange mechanism of the modeling tips 

_ Fast operational and heated instruments 

_ anti-twist cables that are insensitive to heat 

_ Gold plated copper tips for better heat conductivity 

Change of probes without the 

risk of burns – snap on, snap off 

Simple adjustment of individual 

working temperature 

Outsource 

Digital 

Inhouse 

Digital 

Waxjet available as an 

optional device 

Inhouse 

Manual 

metall 

+

ProduCtS 

milling 

F r a m e w o r k m a n ag e m e n t 

F | 35

F | 36 

Framework management milliNG 

milliNG 

universal use thanks to modular components 

for surveying, blockout, milling 

Stable precision milling device 

on solid vertical column with 

ball thread and playless, 

smooth, double-jointed arm. 

milling head with micrometer 

screw for accurate adjustment 

of vertical drillings. 

integrated control for micromotor, 

magnetic table with 

modular design and light 

connections. micromotor can 

be replaced by optional 

analyzing rod for surveying 

or block out set for blocking 

out. 

Blockout upgrade kit aF350 

adjustable for blocking out and 

surveying 

Delivery volume: 

Blockout- Set 

marker 

adapter cord, adjustable 

_ Upgradable to an undercut and surveying machine (optional) 

_ Quick and easy fixing of the double-joint arm with one hand 

_ automatic retraction of the articulated arm via memory function 

_ model table can be magnetically fixed in its position automatically by pressing one button 

_ it is possible to fix the model table mT3 at the push of a button in any angle with the 

patented fixing mechanism 

_ Spring pressure arm resistance for vertical manoeuvrability 

_ Shadow-free illumination with the leD double light fixture 

Blockout Set marker adapter cord, adjustable 

+

milliNG Framework management 

milliNG 

general-purpose 

parallelometer 

Due to its modular construction 

it can be upgraded to a 

full milling machine and blockout 

device. it has an electromagnetic 

base plate for 

fixing the model table, an 

articulated arm and an analyzing 

rod. The electricity for 

the device and the light as 

well as the continuously variable 

control for the electrically 

heated block out set are 

placed in the base. 

milling head for converting 

the ap100 into a milling 

machine. The milling head is 

placed in the articulated arm 

and its adapter is connected 

with an existing handpiece. 

_ Upgradable to a blockout device and milling machine. 

_ Quick and easy fixing of the double-joint arm with one hand 

_ No-play and smooth three-dimensional guidance 

_ automatic retraction of the articulated arm via memory function 

_ Temperature control for blocking out with the blockout-set 

_ model table can be magnetically fixed in its position automatically 

by pressing one button 

milling head 

The optional block out set can easily 

be attached to the analyzing rod 

Continuously variable temperature 

control for block out set 

+ 

F | 37


amannGirrbach Performances 

Performances 

overvIew 

Know-How-Box 

ProfIt-Box 

servIce-Box 

„It takes more 

than just good 

tools to make a 

modern dental 

laboratory stand 

out from the 

rest: customer 

service is what 

separates the 

wheat from the 

chaff.“ 

name: Peter biekert, ZTM | residence: Stuttgart | 

Profession: Master dental technician Laboratory: 

Dentallabor biekert | Infos: Organisation of courses on 

creation ceramics. he has been active as popular and 

distinguished expert throughout Europe and the USa 

for 20 years. 

P | 1

P | 2 

Performances 

inTrODUcTiOn 

Performances 

Know-How – ProfIt – servIce 

our range of aG services – 

before, during and after purchase. 

The aG „Performances“ are a selection of services which we provide 

for our customers. Day to day success is not only dependent on the 

high quality of systems and materials. in this part of the catalogue 

we would like to show you the other areas in which we strive to support 

you, parallel to our daily business, in order to enhance your 

working performance to a greater level. a comprehensive range of 

services – from purchase and training to after-care support. 

+ 

tHe aDvantaGes In tHe aG-Performances 

Know-How-Box 

+ courses: 

_ a comprehensive range of courses available 

_ courses in your area or directly in your laboratory 

_ renowned and well experienced representatives 

assure your learning success 

+ D-LaB 24 

_ The “digital production specialist” from amannGirrbach 

_ Know-how – 24 hour online access 

_ E-learning module, instructions and videos on 

aG techniques 

+ aG website 

_ Various basic information on aG products – daily updates 

_ Overview of news, the company, contacts and services 

+ aG webinars 

_ Live application support via internet – directly into 

your laboratory 

ProfIt-Box 

+ financing plans: 

_ Flexible financing options for our products and systems 

_ Flexible selection and automatic delivery of consumables 

+ Promotions 

_ customised promotions for use in your own laboratory 

_ continual promotions from the entire product range 

+ Protection-Plan 

_ Economical options to extend the stipulated warranty 

with enhanced service offers 

servIce-Box 

+ customer service: 

_ competent and service oriented consumer advice 

_ Global network of authorised dealers 

+ technical service/service partners 

_ Technical services with Dental know-how 

_ Global network of authorised service oriented companies

OVErViEw 

Know-How-Box 

Performances 

D-LaB 24 P | 16 

The new E-learning portal from amannGirrbach. E-Learning module, videos, forums 

and a variety of training materials surrounding the aG methods on model management, 

framework management and aesthetic management (www.d-lab24.com) 

courses P | 6 

aG training centre, courses at external locations, course programmes, 

representatives – an overview of all information 

aG website P | 21 

Various basic information on our products, systems and company in general – 

daily updates under (www.amanngirrbach.com) 

aG webinars P | 20 

The new generation of online-support via internet. Our trainer communicates 

via video image and shares his expertise directly with you, in your laboratory 

ProfIt-Box 

financing plans 

Flexible financing options for our products and systems (Details can be obtained 

from our specialist trade counter) 

Promotions 

individual promotions, combined promotions and introductory offers (Details can 

be obtained from our specialist trade counter) 

Protection-Plan P | 22 

attractive options to extend the stipulated warranty with enhanced service offers 

servIce-Box 

customer service P | 25 

contact & information on our international sales and trading partners worldwide. 

technical service/service Partner P | 25 

information on technical services and our service partners worldwide. 

P | 3

Know-How-Box 

Performances 

training courses | D-LaB 24 | aG webinars | aG website 

P | 5

P | 6 

Performances KnOw-hOw-bOx 

TraininG cOUrSES 

trainingcourses 

Learn techniques – 

master skills 

State-of-the-art technologies, 

growing expectations of patients 

and not least global competition 

step up the pace in our 

business sector as well. For 

those who want to meet the 

demands of the market in the 

long run, it is vital to be flexible 

and stay at the cutting edge 

of technology. 

The established and highly 

attended courses on a multitude 

of subjects substantially 

contribute in this regard. 

our course instructors show 

you how to master your everyday 

tasks with greater ease. 

Interested in scheduling a 

training session? 

it is very easy: Talk to our 

amannGirrbach contact partner 

or call us directly and you 

will get all information about 

the next possible training session 

date at amannGirrbach 

or at your facility. all 

amannGirrbach training is 

performed by a specially trained 

instructor. 

Sabrina amann, your contact 

at our facilities, is pleased to 

help you if you have any further 

queries. She ensures a 

smooth process and sees to it 

that you can fully concentrate 

on your training. 

Sabrina amann 

scope of services 

as a matter of principle, catering for whole-day-courses or severalday-courses 

is included in the participation fee. The courses are 

acknowledged with a certificate. 

cancellation guarantee 

cancellation shall be made in written form and at least 4 weeks prior 

to the beginning of the event. after this period, 50% of the participation 

fee is due; from 1 week prior to the beginning of the course 

100% of the participation fee is due. Optionally, the participation fee 

can be transferred to another course in the following 12 months. The 

participation can be assigned to a substitute free of charge. if 

amannGirrbach is forced to cancel the event due to organisational or 

other reasons, the already paid participation fee will be reimbursed. 

claims beyond this are excluded. 

c o u r s e o r G a n I s at I o n 

You can contact her directly under +43 5523 62333-57, 

per Fax (-55990) or under www.amanngirrbach.com

KnOw-hOw-bOx Performances 

TraininG cOUrSES 

course no. 999030 

Instructors 

Dietmar schaan 

Knut miller 

ramon flores 


Instructors 


Knut miller 

ramon flores 

articulated Giroform ® models in 

centric occlusion – ready for model 

analysis 

model management Basic 

high-precison models with added value 

course contents 

_ Production of segmented Giroform models – including preparation 

and sealing of the model dies with Giroform Die Link (Die Varnishes) 

_ average-value transfer of the models into the artex cr articulator 

_ Model analysis 

_ controlled vertical and horizontal positioning by means of the fully 

adjustable artex ® cr 

course objectives 

You learn to transfer a flexible patient situation into the artex articulator 

by means of the Giroform model system. Utilisation of all technical 

and model-analysis possibilities using the articulator during 

daily laboratory routine. 

model management advanced 

Technical and model-analysis applications of the articulator during 

daily laboratory routine 


_ Production of segmented Giroform models – including preparation 

and sealing of the model dies with Giroform ® Die Link (Die Varnishes) 

_ average-value transfer of the models into the artex ® cr articulator 

_ Model analysis 

_ controlled vertical and horizontal positioning by means of the fully 

adjustable artex ® cr 

_ individual main topics and supervisions on „functional concept for 

everyday use“ – defined in consultation with the participants and 

adapted to the respective market needs 

_ Transfer of static patient parameters 

_ axis relation and intermaxillary relation into the articulator 

_ Definition of the axis- and occlusion-related determination of the 

maxillomandibular relation with facebow and centric registration 

_ creation of position bite registrations and individual programming 

of the articulator 

_ intraoral bite registration with centrofix ® 

course objectives 

You learn to transfer a flexible patient situation into the artex ® articulator 

by means of the Giroform ® model system. Utilisation of all 

technical and model-analysis possibilities using the articulator during 

daily laboratory routine; improvement of the communication between 

dentists and dental technicians; individual adaptation of all static 

and dynamic patient data. 

Participants 6-12 

Location Duration 

amannGirrbach 1 day 

note: 

Materials to be provided 

for/prepared: 

_ personal working instruments 

_ abrasive grain & diamond 

cutting disc 

_ 2 silicone impressions 

(1 x maxillary – 1 x mandibular) 

per participant 

* incl. full board & material 

Participants 4-8 



note: 

Materials to be provided 

for/prepared: 

_ Personal working instruments 

_ abrasive grain & diamond 

cutting disc 

_ 2 silicone impressions 

(1 x maxillary – 1 x mandibular) 

per participant 

* incl. full board & material 

P | 7

P | 8 


cOUrSES 


Instructor 

Doris wohlgenannt 


Instructors 


Knut miller 

norbert asmus 

axel reichert 

falko noack 

Falko noak 

amannGirrbach aG, austria 

ceramill system – Beginner’s course 

framework construction using the ceramill system – 

Basic principles on manual copy-milling 

with zirconium oxide, the dental industry has gained a high performance 

material for the fabrication of ceramic dental restorations. 

with almost unequalled characteristics, zirconium oxide offers the 

highest biocompatibility, optimal light optics and impressive flexural 

strength. The ceramill system enables this net-product to be 

produced in-house. 


1ST DaY: 

_ The theory of the system 

_ a practical demonstration of framework construction using lightcuring 

modelling acrylic. 

_ an introduction to the ceramill milling system and a milling example. 

_ Fabrication of the framework on own working models. 

_ Milling a demonstration single coping to practise basic operating 

skills. 

_ Milling own objects from a ceramill Zi „blank“ and further tips on 

milling strategies and handling. 

_ Staining (optional) and sintering the frameworks. 

2nD DaY: 

_ implementing the system within the laboratory (milling unit / furnce) 

_ Fitting and finishing the sintered object. 

_ Setting the enlargement factor on the milling unit. 

_ a repeat of all relevant working steps. 

_ introduction to the Teleskopkit 

aim of the course 

_ in-depth introduction to the ceramill-System under professional 

instruction. 

_ Safe use of the ceramill-System in own laboratory. 

ceramill system – advenced course 1 

making large bridges with ceramill system 

course contents: 

DaY 1: 10:00 - 18:30 h 

_ Exchange of experiences between participants, 

tips and tricks, new insights 

_ Particularities of adjusting large workpieces 

_ Joining bridge segments and milling model retaining plate 

_ Positioning and locking model in model retaining plate 71 L 

_ Milling the workpiece you provided 

_ Tips on milling strategy and handling 

_ Detaching the workpiece 

_ Placement in the sintering bed 

DaY 2: 9:00 - 12:00 h 

_Detaching the sintered workpiece, fitting /finishing, 

_feedback/ discussion 

aim of course: 

The continuation course is aimed at ceramill users who have already 

gathered initial experience in using the system. On one hand, this 

knowledge is further extended; on the other hand, the main focus is 

on the special features of long-span bridge constructions. it requires 

special care and know-how to produce them safely and efficiently. 

Participants max. 10 


amannGirrbach 2 days 

tip: 

Please take along: 

_ One pinned laboratory model 

_ Maximum 4 single crowns or 

(optional) a 3 - 4 unit bridge. 

(On course confirmation, each 

participant will receive detailed 

information on the required 

size of the piece of work.) 

_ with or without spacer lacquer. 

_ The preparation margin 

should have only a slight 

chamfer. 

_ callipers for checking the 

coping thickness 




tip: 

Please take along: 

a modelled bridge framework, 

which has not yet been blocked, 

connected or inserted in the 

holding plate 71/77! height of 

the whole framework: 

max. 15mm


cOUrSES 


Instructors 


Knut miller 

norbert asmus 

axel reichert 

falko noack 


Instructors 


Knut miller 

norbert asmus 

axel reichert 

falko noack 

ceramill system – advanced course 2 

making Implant abutments with ceramill system 


DaY 1: 9:00 - 18:30 h 

_ Exchange of experiences between participants 

Tips and tricks, new insights 

_ Particularities of adjusting special indications 

_ how to make individual abutments 

Locking implant abutment in retaining plate 

_ Milling the abutment from a ceramill Zi 31 blank 

_Detaching the workpiece, finishing 

_ colouring and sintering 

DaY 2: 9:00 bis 11:00 Uhr 

_ Fitting/ finishing of sintered workpiece 

_ Feedback / discussion 


This advanced course is aimed at ceramill users who have already 

gathered first experiences with the system. in addition to honing the 

skills you have already acquired, the course focuses on the particularities 

of special indications, especially implant abutments. Performing 

such procedures in a safe and efficient fashion requires considerable 

care and expertise. 

ceramill system – combination course 


DaY 1: 9:00 - 18:30 h 

_ implant abutments 

_ Exchange of experiences between participants, tips and tricks, new 

insights 

_ Particularities of adjusting large workpieces and special indications 

_ how to make individual abutments 

_ Locking implant abutment in retaining plate 

_ Milling abutment from ceramill Zi31 blank 

_ Separation of the object, finishing 


DaY 2: 9:00 - 18:30 h 

_ Fitting the abutment 

_ Large bridges 

_Joining bridge segments and milling retaining plate 

_ Detaching the workpiece, finishing , colouring and sintering 

_ connection of bridge segments and milling out of the model 

holding plate 

_ Positioning and locking model in model retaining plate 71 L 

_ Milling the workpiece you provided 

_ Tips on milling strategy and handling 

_ Detaching workpiece, finishing 

DaY 3: 9:00 - 12:00 h 


_ Detaching sintered workpiece and fitting/finishing 

_ Fitting/finishing sintered workpiece 

_ Feedback / discussion 


This advanced course is aimed at ceramill users who have already 

gath ered first experiences with the system. in addition to honing the 

skills you have already acquired, the course focuses on the particularities 

of special indications, especially implant abutments and large 

bridges. Performing such procedures in a safe and efficient fashion 

requires considerable care and expertise. 




advice: 

The course is based upon a 

complex practise abutment 

(supplied by aG) and includes a 

number of milling hurdles that 

need to be crossed. The idea of 

this course is to ensure that all 

essential procedures and processing 

techniques can be conveyed 

independently of any 

particular implant system. 



amannGirrbach 2,5 days 

note: 

Please bring: 

_ 1-2 different implant systems 

_ metal abutment with laboratory 

analogue/model implant to 

examine the fit 

_ Modelled, unsplinted bridge 

framework that has not yet 

been pinned and not yet been 

inserted into retaining plate 

71! 

_ The model is provided by 

amannGirrbach and sent to 

you prior to the beginning of 

the course. 

_ Overall height of the model: 

15 mm maximum 

_ Your own shaping and working 

tools 

* incl. all course materials and 

full catering 

P | 9

P | 10 


cOUrSES 


Instructors 


Knut miller 


Instructors 


Knut miller 

milling course Basic 

communication of theoretical and practical basic skills in milling 

technology for daily work. safe and confident handling of amann- 

Girrbach milling equipment. tips and tricks for simple and precise 

milling work. 

course syllabus/program: 

_ Theory including the „amannGirrbach milling booklet“ 

aswell as discussing daily problems 

_ Milling in wax (circular, grooves, shoulder pins) 

_ Milling in metal (circular, grooves, shoulder pins) 

_ Milling of an individual abutment (T-attachment) 


Learning of milling technology in easy, reproducible steps. Knowledge 

of types of milling most commonly in use. 

milling course 

communication of more advanced theoretical and practical skills 

in milling technology for daily work. tips and tricks for simple 

and precise milling work. 

course syllabus/program: 

1 st Day, 09.00 – 17.00 

_ Theoretical basic principles 

_ Milling in wax (circular, grooves, shoulder pins) 

_ Milling in metal (circular, grooves, shoulder pins) 

_ Milling of an individual abutment (T-attachment) 

_ handling the expansion of the investment material during 

milling operations 

Variant: model preparations for milling on implants 

Preps of workingsteps in wax on implants 

2 nd Day, 09.00 – 17.00 

Practical part: Milling in metal – milling sample 1 

(variant: on a course model) 

_ conversion of the previous steps „training in wax - rSS-attachment“ 

onto metal, indication and use of the spade driller 

_ Fine milling and polishing with the milling device 


Further acquisition of milling skills in easy, reproducible steps. 

imparting knowledge of the most important indication ranges of 

milling technology 

Participants 8 



advice: 

Prices do not include travel 

costs and material transport 

fees 

Participants 8 



advice: 

Prices do not include travel 

costs and material transport 

fees


cOUrSES 

NEW 


Instructors 

Knut miller 

ceramill mall 

Introductory course – ceramill caD-cam 

scanning the model situation and construction of crowns and 

bridges using the ceramill map + mind – Basic principles of operating 

the scanner and caD software 


1st day from 9am – 5pm 

_ Theoretical introduction to the system 

_ Practical demo of the scanner ceramill Map100 + Map300 

_ Practical demo of the caD software ceramill Mind – construction of 

a single coping step-by-step 

_ introduction to the scanners ceramill Map100 + Map300 (scanning 

the model situation with opposing dentition and bite registration) 

_ Tips on quick and easy scan strategies 

_ independent scanning of own models (max. 3 units, not blocked) 

_ independent construction of crown/bridge based upon the scan 

2nd day from 9am – approx. 3pm 

_ repeat of course content from previous day 

_ Deeper insight into the construction possibilities using the software 

_ “Software tips“ and special tools during construction 

_ independent operation of scanner and software. The construction 

of various indications on the produced scan using the software 

ceramill Mind 

_ independent construction of crowns/bridges 

_ Transfer of data to the milling center (finished framework will be 

sent by post to the customer’s laboratory) 

aim of the course 

_ intensive introduction to the scanner function and caD software 

under qualified instruction 

_ reliable, independent use of the system components, scanner and 

software 



Inhouse Manual 

Further information on the forthcoming 

ceramill mall course programme can be 

requested from Sabrina amann under the direct 

tel. no. +43 5523 62333-57, via fax (-55990) or 

under www.amanngirrbach.com 




tip: 

Basic computer skills required! 

_ Models to scan are supplied by 

amannGirrbach 

_ Patient models (max. 3-4 unit 

bridges) can be brought along. 

(Preparation: a sectioned, 

pinned model – all elements 

must be removable, opposing 

model, both models must be 

in an articulator, articulator) 

do not lacquer or seal dies, do 

not mark the prepared margin! 

P | 11

P | 12 


cOUrSES instructors 

norbert asmus, Dipl.-Ing. (fH) (Graduate engineer/higher education institute) 

Graduate Engineer in dental technology at the Fh Osnabrück and dental technician with years of experience. 

For 4 years now, norbert asmus has contributed his expertise in theory and practice for amann 

Girrbach, and participated in all development steps of the ceramill system. his involvement in the entire 

working process of the system, and the development and adjustment of all auxiliary materials make him 

a highly qualified ceramill instructor. Since 2007, norbert asmus teaches ceramill beginners and advanced 

users from all over the world at the local laboratory, at trade shows or at the facilities of amann 

Girrbach trade partners. 

ramon flores 

born in Mexico, he completed his training for dental-technical assistant in Pasadena in 1993 and for 

dental technician in Ludwigshafen, Germany, in 1997. From 2000 to 2006, ramon Flores worked in the 

Smith-haist dentist’s laboratory in Palm harbor, Florida. There, he was head of the department for compound 

materials as well as the specialised department for dental crowns and bridges. in 2007, he eventually 

joined amannGirrbach america. as a consultant for the ceramill system and with his comprehensive 

expertise in the field of model management, ramon Flores is active for amannGirrbach in canada as 

well as north and South america as consultant and course leader. 

Knut miller, Graduate Dental technician 

Dental technician apprenticeship and studies at the Dental academy in baden/Vienna, 1988 graduation 

with honours. Subsequently, Mr Miller expanded his knowledge in the area of ceramic, gold, milling and 

combination techniques. between 1996 and 1998, he supervised the milling course centre and the international 

course management of amann Dental Gmbh (today amann Girrbach). For 3 additional years, 

Knut Miller worked as consultant, instructor and course organiser at the international centre for Dental 

Education in Liechtenstein for ivoclar Vivadent in the fields of ceramics and ceromers. Since 2001, Knut 

Miller has been active worldwide as freelance instructor and trainer and continuously broadens his spectrum 

of knowledge on an international scale. in 2005, Teamwork Media published his dental textbook 

“individualitas naturae dentis - individualitas dentis naturae“, which is one of the publishing house’s 

best-selling titles to this day. Years of experience and commitment to ceramill were the decisive factor 

for continued cooperation between amann Girrbach and Knut Miller in February 2008. 

falko noack, Dipl.-Ing. (fH) (Graduate engineer/ higher education institute) 

after 8 years of experience as dental technician, he studied at the Fh Osnabrück (higher education institute) 

and graduated with a degree in dental technology. Today, Falko noack contributes his practical and 

theoretical skills to research and development of amannGirrbach in zirconia manufacturing and processing. 

being a co-developer of the ceramill systems, Falko noack has extensive experience in applying 

ceramill and defining the possibilities of zirconium oxide processing. with respect to his theoretical and 

practical competencies, he is the contact for international trade partners and editors of prestigious 

publications on the subject.


cOUrSES instructors 

axel reichert, Dipl.-Ing. (fH) (Graduate engineer/ higher education institute) 

Trained dental technician with work experience and completed studies of dental technology at Fh Osnabrück 

(higher education institute). axel reichert has been with amann Girrbach since 2006, and contributed 

significantly to the development of the ceramill system. his key competencies are primarily focusing 

on the characterisation of materials, their examination and, in a large sense, quality assurance of Zi 

blanks. additionally, he is increasingly employing his broad spectrum of development and user expertise 

in ceramill training for the international dental community. 


Qualified dental technician and expert in the fields of milling and lasing due to various further trainings; 

Dietmar Schaan is particularly specialised in the field of functional diagnostics. Dietmar Schaan completed 

his craftsman’s certificate in 2001 and he began working as the head of department at Girrbach in 

2002, with focus on titanium processing. Since 2003, he has been working at amannGirrbach as a trainer, 

consultant and demonstrator. in this function, he is present globally at traders, dental technicians, 

dentists as well as exhibitions and does not only love to convey his knowledge, but also his enthusiasm. 

stefan schunke, master dental technician 

Dental technician training in Leverkusen, in gnathological Labour bölte Düsseldorf until 1988. Master 

craftsman’s diploma in 1988, partner of M.h. Polz laboratory in 1989. From 1997 sole proprietor, 

“Pfannenstielpreis” and creative circle award in 2006, technical reports on waxing-up and 

milling techniques; books on “casting technology”, “Function in or out”, compendia on dental milling 

technology Volumes 1 & 2, Vice President of the DGÄZ, member of the DGZMK, dental working party of 

Kempten, “Dental Excellence international Laboratory Group”. instructor for occlusal function and 

morphology. international speaker on courses. 

Doris wohlgenannt, Dental technician 

Trained Dental Technician who passed her final apprenticeship examination in baden/Vienna. Furthermore, 

Mrs wohlgenannt acquired special skills in the processing of titanium, combination prosthetics, 

veneer ceramics and prosthetics. in 2001, she started working as trainer at the icDE (international centre 

of Dental Education) with the company ivoclar Vivadent. There, Doris wohlgenannt worked both 

nationally and internationally as technical bPS trainer in the area of biofunctional prosthetics, and also 

manages courses and gives lectures as bPS trainer in Liechtenstein. Today, Mrs wohlgenannt is self-employed 

with her team “wohlgenannt Zahntechnik KEG” in Dornbirn, one of the dental laboratories in 

austria to feature a manual zirconia milling system. 

Since 2008, Doris wohlgenannt teaches international ceramill beginners and advanced users at amann 

Girrbach in framework manufacturing with zirconium oxide. 

P | 13

P | 14 


cOUrSES 

How to fInD us 

B ODENSEE 

SWITZERLAND 

Feldkirch 

GERMANY 

Koblach 

Götzis 

Lindau 

Hohenems 

. Innsbruck 

Bozen (Italy) 

accommoDatIon facILItItes 

Hotel mohren*** 

Stiegstrasse 17 

a-6830 rankweil 

Tel. +43 (0)5522 44275 

Fax. +43 (0)5522 44275-5 

E-mail: office@mohren.at 

www.mohren.at 

Gasthaus Landhaus schiffle*** 

radetzkystrasse 38 

a-6845 hohenems 

Tel. +43 (0)5576 72432 

Fax +43 (0)5576 72432-88 

E-mail: office@hotel-schiffle.at 

www.hotel-schiffle.at 

Hotel 24/7**** 

Montfortstrasse 6 

a-6840 Götzis 

Tel.: +43(0)5523 69247 

Fax: +43(0)5523 69247-7 

E-mail: office@hotel247.at 

www.hotel247.at 

Bregenz 

Dornbirn 

n München 

Stuttgart 

AUSTRIA 

Hotel Dorfpark**** 

im buch 1 

a-6840 Götzis 

Tel. +43 (0)5523 55250 

Fax +43 (0)5523 55250-410 

E-mail: office@hotel-dorfpark.at 

www.hotel-dorfpark.at 

Hotel Krone**** 

hatlerstrasse 2 

a-6850 Dornbirn 

Tel. +43 (0)5572 22720 

Fax +43 (0)5572 22720-73 

E-mail: info@kronehotel.at 

www.kronehotel.at 

�� 

�� 

�� 

�� 

�� 

� �� 

� �� 

�� 

� �� 

� �� 

� �� 

�� 

�� 

�� 

�� 

�� 

�� 

�� 

�� 

martinspark Hotel **** 

Mozartstrasse 2 


Tel. +43 (0)5572 3760 

Fax +43 (0)5572 3760-376 

E-mail: info@martinspark.at 

www.martinspark.at 

�� 

four Points by sheraton**** 

Messestrasse 1 


Tel.: +43 (0)5572 38880 

Fax: +43 (0)5572 388830 

E-mail: info@4p-sheraton-dornbirn.at 

www.4p-sheraton-dornbirn.at

Know-How-Box 

Performances 

training courses | D-LaB 24 | aG webinars | aG website 

P | 15

P | 16 


D-Lab 24 

d-lab24.com 

the dynamic e-learning Portal from amannGirrbach – the digital ”Product 

specialist” for application techniques, daily updates, 24h online access. 

The D-Lab24 provides a platform 

for all users of our products, 

where they can receive 

information on our systems 

and products easily, comprehensibly 

and without delay. 

The demands on the exchange 

of knowledge are varied and 

therefore require different 

methods of transfer. in order 

to fulfil this demand, directions 

for use in the form of complex 

e-learning modules (step-bystep) 

are available. 

complicated features can be 

sent by way of video sequences 

to provide maximum 

transparency. in addition to 

this the D-Lab24 offers a 

number of know-how documents 

for downloading. 

instructions for use, information 

on courses, case studies 

and basic dental technical 

know-how: The D-Lab24 provides 

you with all the information 

required for implementing 

our products and 

systems with technical accuracy 

and efficiency. 

_complex e-learning modules on aG methods describe every single move. 

_Processing assurance for your laboratory with the option of breaking down each 

single working step into the smallest details. 

_Easy, cost-effective and efficient training for your laboratory staff. 

_Videos enable complex working steps to be understood easily. 

_Downloads available on working, application and operating instructions guarantee 

the correct application of our products and systems from the start. 

_The entire know-how on products, systems and applications –accessible 24h 

_always up-to-date due to continual updates 

_Extensive know-how pool – continually enhanced with new contents. 

access coDe D-LaB24.com 

available forthwith from your specialist dealer, via hotline +43 5523 62333-0 

Or on order via email: d-lab24@amanngirrbach! 

no online registration necessary. 

+


D-Lab 24 

d-lab24.com 

e-Learning module 

model management 

From model making with the 

Giroform ® System to model 

analysis in the articulator: 

The methods are described 

down to the smallest detail in 

over 300 working steps. 

a well-structured presentation 

provides a comprehensive 

overview and enables quick 

access of the desired information. 


Zirconium oxide 

framework management 

From the start (model in the 

articulator) to the design, 

analogous milling, sintering 

and fitting of the object: 

The whole production process 

of a zirconium oxide restoration 

using the ceramill 

System is shown from a-Z, 

using a typical single coping 

as a case example. 

The entire 


E- Learning display format 

d-lab2 4 .com 



The entire 



d-lab2 4 .com 



request your access 

code today under: 

+49 7231 957-100 

d-lab24@amanngirrbach.com 



+49 7231 957-100 


P | 17

P | 18 


D-Lab 24 

d-lab24.com 


metal framework 

management 

Exactly the same as with 

zirconium oxide framework 

fabrication, this module 

describes the procedure for 

fabricating frameworks in 

metal. 

Using a non-precious metal 

(Girobond Soft) single crown 

as a case example, the whole 

process is explained from the 

start (model in articulator), 

through the framework 

design in wax, and then finally 

to the finished coping. 

by using Smartbox invest as 

an investment material, maximum 

processing assurance is 

achieved. 


aesthetic management 

This module is divided into 2 

parts. The first part deals with 

all-porcelain restorations and 

the second part with metal 

bonding porcelain. both 

modules describe the entire 

processing method from the 

preparation of the framework 

up to the glaze firing stage. 

The entire 



d-lab2 4 .com 



The entire 



d-lab2 4 .com 





+49 7231 957-100 




+49 7231 957-100 

d-lab24@amanngirrbach.com


wEbinarS 

ag webinars 

the new generation of 

online support via Internet 

webinar systems are similar 

in constitution and function 

to so-called “instant messenger 

programs” such as Skype, 

icQ or the aOL instant messenger. 

Enhanced features 

such as the possibility to broadcast 

presentations or simulate 

a digital blackboard, 

make this an interactive 

online support service of the 

highest level. 

Many problems that occur in 

day-to-day dental technical 

life can still only be solved 

from person to person. This is 

where webinars offer a highly 

efficient alternative. Quick 

and uncomplicated help in 

the form of a support specialist, 

via internet, directly into 

your laboratory. 

There are many different 

types of problems that require 

personal assistance, where 

we can offer this type of support. 

Your only requirement 

is an active access. 

_ help regarding our many systems, applications and products. 

_ no travel costs or waiting times for support technicians. 

_ interactive online training possible for up to 30 participants. 

_ cost-effective possibilities for training personnel. 

_ Quick help with installation of machinery. 

_ Quick help with maintenance and servicing. 

weBInar InfoLIne 

+43 5523 62333-0 

or via email: dt_support@amanngirrbach.com anfordern! 

+ 

P | 19

P | 20 


aG-wEbSiTE 

ag website 

www.amanngirrbach.com - user-friendly, 

clearly represented and based on essential facts. 

The amannGirrbach website 

offers basic up-to-date information 

for customers and 

trading: 

_new products and 

innovations 

_Products, systems & 

methods 

_business & careers 

_Trade exhibitions & events 

_Technical service 

_contacts & trading partners 

_Training courses 

_Downloads (instructions, 

catalogues etc.) 

_ Downloads (instructions, catalogues etc.) 

_ all basic information on products and systems (descriptions, logistic data, 

ordering information) 

_ info on new products and further developments 

_ notification of branch specific dates (trade exhibitions, events) 

_ Online support via the user-forum and support-forms 

_ comprehensive downloads (catalogues, instructions for use, news, certificates, etc.) 

_ Ongoing current advertisements for vacancies 

amannGIrrBacH weBsIte 


+

ProfIt-Box 

Protection-Plan 

Performances 

P | 21

P | 22 

Performances PrOFiT-bOx 

PrOTEcTiOn-PLan 

protectionplan 

renew the stated guarantee and profit 

from an extensive range of services. 

The aG Protection Plan is a well-integrated solution, which extends the basic one year guarantee for your amannGirrbach 

machine to three years, from the purchasing date. 

The service plan includes repair service worldwide, web based support resources i.e. exchange or rented machinery. 

it is advisable to acquire the aG Protection Plan directly when you purchase your machine in order to benefit from the 

protection service offered in the plan, to its optimum. 

1 year 

1 year 

included protection 

2 years 

2 years 

Throughout the duration of the aG Protection Plan you are 

entitled to live online support from the amannGirrbach support-team 

experts. 

The aG Protection Plan ensures that repairs are carried out 

using original spare parts and by technicians that have been 

certified by amannGirrbach. 

For a term of 3 years from the purchasing date, the aG 

Protection Plan covers all costs incurred through faulty material 

or manufacture. You will benefit from a guarantee that 

lasts two years longer than the manufacturer’s stated legal 

requirements. Spare parts and labour are included. The repair 

service can include a collection and/or sending service. 

The exact details of the aG Protection Plan can be found on 

the guarantee card supplied with every machine. 

3 years 

3 years 

Extended protection: a comprehensive range of services lasting 3 years. 

extensive protection for 3 years from the date of purchase: 

_no maintenance or service fees 

_no transport fees for collection or return 

_no spare parts costs 

_Machine rental when necessary 

_Online support free of charge 

+

servIce-Box 

Performances 

customer service | technical service/service Partner 

P | 23

P | 24 

Performances SErVicE-bOx 

cUSTOMEr SErVicE 

customerservice 

amannGirrbach Products can only be acquired outside 

of Germany and austria from our authorised dealers. 

You can find a specialist 

dealer in your area through 

our worldwide network of 

amannGirrbach dealers. 

if you do not have an active 

internet access or if you cannot 

find a dealer in your area, 

please contact our export 

department at the 

amannGirrbach headquarters 

in Koblach, austria: 

amannGirrbach aG 

Fon: +43 5523 62333-0 

Fax: +43 5523 55990 

Email: 

austria@amanngirrbach.com 

DeaLer DIrectory 

http://www.amanngirrbach.com/en/contact/find-dealers/

SErVicE-bOx Performances 

TEchnicaL SErVicE/SErVicE ParTnEr 

technicalservice | servicepartner 

authorised amannGirrbach 

service partners in your area 

The authorised service companies 

from amannGirrbach 

provide a repair service using 

original amannGirrbach 

machines and spare parts. 

These service companies 

have trained personnel and 

the technical information 

necessary for the correct and 

professional repair of our 

machines. 

if you cannot find your service 

company, please contact our 

in-house technical service 

department: 

Mr. Jürgen nachbaur 

Tel: +43 5523 62333-207 

juergen.nachbaur@amanngirrbach.com 

tecHnIcaL servIce 

+43 5523 62333-207 

http://www.amanngirrbach.com/en/contact/technical-service-int/ 

P | 25

Order InfOrmatIOns Model ManageMent 

order inforMations 

aMannGIrrBach Model ManageMent 

reGIstratIOn | artIculatIOn | mOdel faBrIcatIOn 

B | 1

B | 2 

Model ManageMent Order InfOrmatIOns 

artex ® 

typ cn 

artex ® 

typ ct 

artex ® 

typ cP artex ® 

typ cr 

NEW 

artex ® 

typ Bn 

artex ® 

articulators 

217360 artex typ Bn 

217310 artex typ cn 

217320 artex type ct 

218750 artex typ cP 

218760 artex typ cr 

218730 artex arcon clip 

217330 modell plate blue (pair) 

217331 modell plate blue, 50 pcs. 

215250 retention disks, 100 pcs. 

299991 Individual engraving on artex 

217333 support pin c screwable 

dentist Kit 

free choosable artex articulator, splitex Plate set, artex facebow, 

splitex transfer stand. 

217310, 217320, 218750, 218760 

artex (cn ct cP cr) 

216100c splitex Plate set 

218600 artex facebow 

216240 splitex transfer stand 

dentist Mini Kit 

artex facebow, splitex transfer stand. 

218600 artex facebow 

216240 splitex transfer stand 

technician Kit 

free choosable artex articulator, splitex Plate set, counter Plates, 

retention disk, splitex Key. 

217310, 217320, 218750, 218760 

artex (cn ct cP cr) 

216100c splitex Plate set 

216235 counter Plates 

216150 retention disks 

216010c splitex key 

m | 15 

m | 15 

m | 15 

m | 16 

m | 16


^ 

Plate set, c-Version 

mounting tool 

^ 

# 

& 

! @ 

! @ 

# 

& 

$ 

$ 

% 

% 

splitex ® 

Keys 

216010 splitex key for artex, 116 mm 

216010c splitex key for artex, 126 mm, c-Version 

216011 splitex spacer Plate +10 mm 

(required for new serial 126 mm) 

splitex ® 

disc set 

216100c ! – ^ splitex Plate set, c-version 

216100 splitex Plate set (without picture) 

216110c ! splitex Base Plate (tOP) without magnet 

216120c @ splitex adjust. Plate mandibular without magnet 

216160 # 1 magnet removal Pin, 2/Pkg 

216150 $ retention disks, 100 pcs. (set: 2 pcs. included) 

216111c % splitex magnet (set: 2 pcs. included) 

216112c ^ assembly wrench 

216170 splitex screws max./mand. 

216140 splitex magnets, 6 pcs. 

216113c & mounting tool for magnetic holder 

splitex ® 

splitex ® 

Counter Plate 

starter Kit 

216050c !–& starter-Kit c-Version 

216010c ! splitex key for artex, 126 mm, c-Version, 1 pcs 

216100c @ splitex-Plate set, c-version, 3 pcs 

216150 # retention disks, 100 pcs. 

216020c $ splitex mounting articulator, 1 pcs 

216230 % splitex-counter Plate, 10 pcs 

216200 ^ master platform 

743040 & artex separating spray 

216050 !–& starter-Kit 

m | 17 

the shock-resistant plastic material reliably adapts the splitex plinth 

plate without distortion. Both plates are suitable for multiple use. 

the Premium quality (white) offers a higher accuracy (< 10 μm!). 

_ always available for quick, precise adaptation at the plinth plate 

_ Prevents the risk of ill fit since no plaster expansion takes place 

_ tight, even model fixation, but nevertheless allowing safe removal 

and reposition 

216230 splitex-counter Plate, 10 pcs. Premium white 

216235 splitex-counter plates 100 pcs. classic black 

216150 retention disks, Ø 36,5 x 1,5 for splitex 100 pcs. 

m | 17 

m | 17 

B | 3

B | 4 


technical data 

dimension: 160 x 160 x 160 

Weight: 700 g 

finish: aluminium anodized 

! 

@ 

# 

@ 

! 

$ 

artex ® 

/splitex ® 

Mounting articulator 

the mounting articulator is not used as an articulator, but can be 

understood as a device which protects this precision instrument. 

since models can be freely exchanged between similarly-calibrated 

articulators, they do not need to be transported in the articulator but 

can be transferred using mounting articulators which are similarly 

calibrated to the same model settings. 

_ safeguards articulators against water and plaster dirt 

_ compatible with all types of facebow and transfer systems 

_ centric and vertical height are fixed using rigid hinge axis/incisal pins 

_ easy removal of the models due to a detachable magnet in the 

upper frame 

216020 splitex mounting articulator 

216020c splitex mounting articulator, 126 mm carbon-Version 

216021 O-ring for head support 

216031c conversion kit for mounting articulator c-Version 

216030c anterior guidance pin 126 mm c version 

splitex ® 

splitex ® 

artex ® 

separating spray 

silicone-based separating spray for metal,stone, keeps articulator 

and model plates clean. 

743040 300 ml 

Master Platform set (1 to 3 parts) 

for the production of splitex counter plates made from surplus stone. 

magnetically connects to the splitex plates. 

216200 ! set, 3-parts 

216150 @ retention disks, 100 pcs. 

216211 

# master platform set 

216220 $ rubber frames for socket 

216205 @ – $ set, 1-part 

216141 1 magnet (built-in) 

216221 rubber frame for socket, low-level 

Mounting glue 

for the controlled fixing of the mandibular adjustment plate in the 

articulator. creates the smallest gap width possible, no shrinkage, 

safe adhesion. 

_ economical, easy to use, and removable for renewed adjustment 

513110 ! 50 ml mounting Glue / loctite 

513120 @ 150 ml cleaner f. Glued areas 

artex ® 

-Modell Plate 

artex model plates enable easy and quick retaining due to integrated 

magnets in the upper- and lower part of the articulator. suited for 

multiple use. 

217330 modell plate blue (pair) 

217331 modell plate blue, 50 pcs. 

215250 retention disks, 100 pcs.


* 

@ 

( 

! 

& 

BM 

# 

! 

BL 

$ 

@ 

^ 

% 

dr. Behrend type Clinometer 

adjustable Perspex ® 

shield furnished with several vertical lines and 

two horizontal lines, for transferring physiognomic esthetic parameters. 

Once adjusted to the facebow, the horizontal lines can be aligned 

to match the eyes and the line of the anterior teeth, using the 

rotary control. the tooth position as determined is represented as an 

angle, and can be transferred to the articulator in the laboratory to 

recreate the position of the anterior teeth. 

_ determines asymmetries and compensates them during set-up 

_ supplies the technician with important esthetic information 

_ helps to prevent remakes, improves function and esthetics 

219960c ! „Operatory“ clinometer 

219950 @ „laboratory“ clinometer 

218110c Pin holder 

217131 cranked pin for artex 

Centrofix ® 

nach dr. lüth 

Intra-oral centric registration with vertically adjustable tracing ball: 

corrects the vertical distance during registration and locks the 

determined centric position without plaster by means of an adjustable 

clamp. German Patent 4014975, us Patent 5.188.529 

_ time-tested support pin methodology – safe functional results 

_ all relevant information in one session: moulding, jaw relation/vertical 

distance, axial relation, aesthetics template 

_stable and reliable registrations and information for your lab 

242700 ! – BM 

242710 ! Writing board broad 

242720 @ Writing board narrow 

242740 # Pin carrier 

242750 $ tracing ball long 

242751 % tracing ball short 

242760 ^ adjustable clamp 

242780 & cross 

242790 * combination wrench 

242810 ( copper writing platelets 

242820 BL spirit level 

242830 BM distance piece (plastic hose) 

B | 5

B | 6 


! 

! 

@ 

@ 

# 

artex ® 

set-Up index Key for the maxilla 

this facilitates average-value alignment of the endentulous maxilla 

at the remaining anatomical fold in the throat. the vertical adjustment 

of the support fork and the reciprocal bar facilitate improved 

individual positioning of the model. 

_ semi-individual positioning in the articulator without facebow 

_ Basic version with screw thread, or conversion plate for the splitex ® 

system 

216255c incl. thread (thread version) for carbon-Version 

216180 splitex-alteration plate 

artex ® 

set-Up index Key for the mandible 

fundamental scale for average-value alignment of the endentulous 

mandible model at the symphysis and retromolar pads. 

217700 ! with thread 

217700c @ 126 mm for carbon-Version 

216250 with splitex adaption plate 

216250c setup index key with splitex, 

126 mm for carbon-Version 

artex ® 

set-Up templates 

Guide for set-up of full dentures according to the spee/Wilson 

occlusion curve. the horizontally and vertically adjustable device 

with occlusal plane indicator and adjustable inclination supports 

the different templates. 

_ flat template for average-value mounting of dentulous models 

_ 4 radius for adjustment to different tooth/set-up concepts 

_ screw or magnet version, to be ordered separately or as a set 

217730 setup template, „thread“ 

217730c @ template holder, thread for carbon-Version 

217740 template flat 

217741 template r 100 




217749 setup templates kit, 6 parts 

217749c ! setup templates, 6 pcs. 


217731 support for setup templates, low-level, Bitex I/II 

216260 setup template with splitex profile 

216260c # template holder with splitex, 


216269 setup template with splitex profile incl. support-kit 

(5 parts, 217740-746) 

216269c dito, with template-set 5 pcs. for carbon-Version 

217702c distance piece accessory, screwable (10 mm) 

216252c distance piece accessory, splitex (10 mm) 

Ord.-No. 

Spherical 

cap 

radius 

Molar 

cusps 

217746 160 mm 30-35° 

217744 140 mm 25-28° 

Tooth type Tooth manufacturer 

creapearl creation ® 

Poly-star lux hK 

Biodent, 

articron 

Orthognat 

217742 125 mm 15-16° n, t, k, Odilux 

merz dental 

de trey 

lindauer Zähne 

Ivoclar, Weithaas 

Vita 

217741 100 mm 0° Orthocal lindauer Zähne


$ 

217586 217134 217589 

217341 217586c 218160 218162 218110c 217131 

218141 

218142 

BN 

217589c 218180 

artex ® 

217340 217342 

217585 218140 217585c 

218170c 

* BM 

% @ ! $ 

! 

@ 

# 

# 

anterior guidance 

special accessory which fits in all artex ® 

articulators, to mechanically 

individualize/program the anterior area. 

_ Micrometer pin to exactly raise/lower the anterior guidance in 

steps of 1/10 mm 

_ individual anterior guidance using radially guided pin with infinitely 

variable table plate (protrusion 0-40 °, laterotrusion 0-70 °, turning 

to right and left) 

_ Cranked pin provides for unhindered access during anterior set-up 

and maintains clear sightlines 

217586 ^ support pin 

217586c anterior guidance pin for carbon-Version 

217589 & anterior guidance pin 

217589c anterior guidance pin, c-Version 

217585 * anterior guidance pin complete 

217585c % anterior guidance pin for carbon-Version 

218170c $ Individ. anterior guidance, 0 – 70° protrusion, 0 – 40° 

laterotrusion pin, table, adjusting bolt for carbon-Version 

218162 ( heightener 10 mm for radial pin 

218120c radial pin 

217260 BL artex Incisal needle 

218140 BM artex Incisal needle incl. 218141, 218142 

218141 BN table adapter 10° 

218142 BN table adapter 20° 

217340 @ Plate anatomical for carbon-Version 

(40° protrusiv; 30-40° laterotrusiv) 

217345 ! Plate 0° for carbon-Version 

218110c BO Pin holder 

217131 BP micrometer pin 

218180 # micrometer pin artex 

^ & ( BO BP 

218150 

217260 

BL 

B | 7

B | 8 


! 

@ $ 

$ 

@ 

^ 

% 

# 

artex ® 

facebow 

218600 ! – % 

218620 ! Joint support 

218680 @ leipzig nasion 

218607 # Porus Buttons „standard“, pair 

217650 $ artex Quickbite, 10 pcs. 

217928 % tray handle 

optional accessory: 

218609 Porus Buttons long, pair 

218610 axis-plane Pointer w. screw 

218635 carrier for facebow cadiax compact, pair 

218690 nasion vertically adjustab. 

217650 $ artex Quickbite, 10 pcs. 

217928 % tray handle, 5/pkg. 

217611 ^ Bite fork partial two-pack 

impression Compound 

thermoplastic for facebow registrations and centric bite impressions. 

_ soft plastic condition below 55° c 

_ clear and precise performance without any deformation 

_ Quick transition to solid consistency 

463450 Impression compound 115g pack/15 bars 

Bite Compound 

Bite tabs 

thermoplastic pellets on self-adhesive foil to cover the metal bite 

fork for facebow registration. 

642150 180 tabs 

m | 18 

thermoplastic for facebow registrations and centric bite impressions. 

_ soft plastic condition below 50° c 

_ clear and precise performance without any deformation 

_ Quick transition to solid consistency 

463440 Bite compound 120g pack/15 bars


! @ 

! @ 

! 

@ 

artex ® 


for safe transport of the facebow registration to the lab. the universal 

joint with bite fork is removed from the facebow and inserted into 

the reception of the transfer stand. there, the registration is fixed in 

plaster. the detachable transfer table safely and unshakeably takes 

this important patient information to the lab. 

218670c ! transfer stand with table for carbon version 

216240 @ splitex transfer stand complete 

artex ® 

tranfer table 

the detachable part of the transfer stand, either with screw for 

model plates or furnished with splitex magnetic plate. several transfer 

tables are necessary in case of short registration intervals (whereas 

only one facebow and one transfer stand are required). 

_ saves money since only one facebow is sufficient 

_ saves plaster work at the practice but ensures safe transport to the lab 

217671c ! transfer table for carbon version 

216270 @ transfer table with splitex Profile 

artex ® 

transfer Jig 

another direct alternative to the transfer stand and to the direct 

facebow transfer. the universal joint with bite fork is attached to the 

jig holding the registration in axis relation while fixed at the bottom 

part of the artex articulator. 

_ direct and safe model transfer without additional steps 

_ reasonable solution at the practice - saves one „plaster cycle“ 

218631 

artex ® 

Bite fork support/telescoping legs 

Infinitely variable bite fork support (see picture above). the magnetic 

plinth is compatible with all conventional articulators. 

_ fits all types of articulators, either fixed with screw or magnetically 

_ height adjustment by means of a thread, fine adjustment by telescopes 

the telescoping legs are screwed in to support the facebow anteriorly 

during the direct transfer of the facebow registration into the 

articulator. a level helps to adjust the facebow horizontally to the 

table plane. 

217685 Bite fork support 

217624 ! 2 telescopic legs @ + level 

artex ® 

case 

217991 artex case with foam rubber padding (without content) 

m | 19 

m | 19 

B | 9

B | 10 


! 


dimension: 

120 x 90 x 110 

Weight: 480 g 

finish: alluminium anodized 

@ # 



Weight: 157 g 

$ 

% 

artex ® 

noplast 

artex ® 

type nK for easy mechanical model fixation without plaster. 

the freely movable model plate safely holds the model in place according 

to the conventional method with a model table. With help of 

female thread screws, bars/joint discs rigidly block the relation, 

strain-free and distortion-free. 

_ time-saving interim solution for model analysis/discussion 

_ for the making of individual trays/templates and for orthodontic 

apparatuses 

_ to check the function of co-cr cases on investment models 

_ spares valuable working articulators if used for interim steps (but it 

may not, and cannot, replace the model plaster for definite restorations!) 

217460 noplast upgrade kit (OK/uK carrier) 

217480c noplast for artex carbon 

217480 artex ® 

spray marker 

Green occlusion spray with food-grade ingredients. develops only 

little spray-dust, fully water-soluble. 

_ homogenous spray pattern 

_ allows for precise dosing 

_ high selectivity 

541390 spray marker green, 75ml 

artigator 

for the expert and artistic processing of the „triple-tray technique“ 

by the dental technician. this way allows to directly transfer the 

impression into the position-safe auxiliary artigator articulator, 

regardless of the cranium/axis relation. 

_ sturdy unit with safe centric and artex ® 

„click“ lock 

_ Performs average-value movements as well as immediate sideshift 

(Iss) 

_ full frontal access for proper adjustability thanks to the crank pin 

_ direct segment model in magnetic pin plate 

_ replaces four work steps with one, saves half the plaster consumption 

_ Quick amortization due to enormous time and material saving 

218950 ! artigator incl. 2 Base Plates blue 

accessory: 

218941 @ artigator - Base plate blue, 50 pcs. 

218933 # artigator base collar 

218934 artigator incisal pin 

218935 artigator support pin 

218940 artigator centering key 

218949 $ artigator trennspray / 1 l 

218931 % artigator pin plates u (upper) 

218932 % artigator pin plates l (lower)


( 

BP 

BN 

! 

& 

* 

BM 

BO 

^ 



Weight: 9,6 kg 

mains supply: 230(100/115)V/0,32 W 

motor speed: 2.800 min-1 

laser class: 3a < 5mW 

! @ # $ 

% 

$ 

# 

@ 

BL 

giroform ® 

Pin drill 

176700 Giroform Pin drill (100/115 V = 176700V100/V115) 

delivery volume: tungsten carbidge burr 176710, plate support - l 176712, 

impression carrier 176733, tubular socket wrench 176702, 

holding pin 176703, screw driver for adjustment 176004 

176710 Giroform-tungsten carbide Burr 

176712 Giroform-attachment for plates l 

176733 Giroform-Impression carrier 

accessories: 

176712 Giroform-attachment for plates l 

176722 Giroform-attachment for plates Xl 

176711 Giroform-attachment for plates Quadrant 

giroform ® 

giroform ® 

starter Kit 

576702 Giroform-starterkit 

176710 

! tungsten carbide burr 

176733 @ Impression carrier 2x 

321070 # nt-cutter 

359010 $ hammer with aluminium handle 

576450 % Giroform-Pins, 1.000 pkg. 

576461 ^ Giroform putty 1 kg 

576710 & Giroform base plate Premium +, 100 pkg. 

5767501 * Giroform secondary plate 5x 

576765 ( adjustment plate clear, 2 pkg. 

576950 BL Giroform sleeve „kombi“ 

576805 BM Giroform space retainer foil, 50 pkg. 

815300 BN arbor band mandrel 2.35 mm 

815330 BO arbor band, grain 120, 50 pkg. 

990252 BP timer 

576702Int Giroform starter Kit International 

= starter Kit 576702, + classic Plate 576720 (10pcs.), 

magnets 512511 (10 pcs.), sockets 512512 (10 pcs.), 

576716 magnetic plates incl. screw (10 pcs.) 

Base Plates, 100 pcs. 

576710 ! Giroform Premium+ l, 100 pcs. 

576745 Giroform Premium+ Xl, 100 pcs. 

576720 @ Giroform classic l, 100 pcs. 

576740 Giroform classic Xl, 100 pcs 

576726 # Giroform classic l blue, 100 pcs. 

576765 $ Giroform adjustment plate l, 2er 

576766 Giroform adjustment plate Xl, 2er 

giroform ® 

secondary Plate 

576750 l with magnet, 50 pcs. 

576751 Xl with magnet, 50 pcs. 

m | 26 

m | 27 

m | 28 

B | 11

B | 12 


giroform ® 

giroform ® 

Quadrant Base Plate 

shape retaining acrylic base plate for Quadrant impressions. 

576770 Giroform Quadrant base plate, 100 pcs. 

576771 Giroform adjustment plate for Quadrant, 2 pcs. 

giroform ® 

adapter for Vertex ® 

adapter for usage in the Giroform base mounting plates in Vertex 

single-use articulators. 

576790 Giroform adapter for Vertex articulators, 100 pcs. 

Vertex ® 

is a registered trademark of dentsply ceramco 

giroform ® 

pin drill 

conical hard metal drill, cutting geometry perfectly matches the 

giroform base plate material. 

_ short chips smooth cladding 

176710 

giroform ® 

Pins 

576450 1.000 pcs. 

576451 10.000 pcs. 

giroform starter Kit Quadrant 

576702Q Giroform starter Kit Quadrant contains: 

176711 Giroform-attachment for plates Quadrant 

576770 Giroform Quadrant base plate, 100 pcs. 

576771 Giroform adjustment plate for Quadrant, 2 pcs. 

576790 Giroform adapter for Vertex articulators, 100 pcs. 

Vertex ® 

is a registered trademark of dentsply ceramco 

Putty 

silicone putty for placing and blocking the mould on the mould carrier, 

saves plaster as well as subsequent trimming and grinding, pleasant 

lemon fragrance. 

_ Great time-savings as a result of quick blocking 

576461 1 kg tub 

576465 5 kg bucket 

m | 28 

m | 28


! 

! @ 

@ # 

giroform ® 

giroform ® 

giroform ® 

Base Collar 

used Giroform ® 

Base Plates which have already been drilled can be 

used to make master casts. 

576950 ! Base collar l-Kombi 

576961 @ Base collar Xl 

giroform ® 

duplication flask 

for the duplication of refractory dies varying in size from single 

segments up to the complete dental arch. suitable for Giroform ® 

base plate l. 

576670 

giroform ® 

refractory Pin 

removable conical ceramic pins, inserted into the base plate, are 

used in refractory duplication. 

576480 Giroform refractory Pin, 25 pcs. 

giroform ® 

space retainer foil 

Provides enough space for pins and magnet. stabilizes the base plate 

in the area of the splitcast profile. 

576805 50 pcs. 

Magnets and sockets 

magnet Ø 31.9 x 6 mm, including socket and retention disc. allowing 

removal of the model and reposition in the articulator. Independent 

system use. 

512500 magnets with sockets and retention disks, 10 pcs. 

512511 magnetic plates 100 pcs. Ø 20 x 6 mm 

512512 sockets 100 pcs. Ø 25 x 7,5 mm 

giroform ® 

magnetic discs 

! edged, Ø 31.9 x 1.5 mm for universal usage, 

@ stainless steel flat, edged Ø 36.5 x 1.5 mm for splitex counter plates 

# Ø 25 x 1.0 with centric bore and m3 –countersunk screw for 

Giroform classic base plates 

215660 ! retention Ø 31.9 x 1.5 100 pack 

216150 @ retention discs stainless steel 

Ø 36.5 x 1.5 for splitex 100 pack 

576716 # m3-retention discs for Giroform classic 

Ø 25 x 1.0 100 pack incl. screws 

576717 screwdriver for retention screws 

labels 

909032 1.000er-Pckg. 

m | 29 

m | 29 

B | 13

B | 14 


NEW 

NEW 




mains supply: 

100/115/230 V, 50/60 Hz 

machine rating: 95 W 

Capacity powder: ca. 8 kg 

time to allot 20 ml : 100 g appr. 30 s 



(without stand) 

Weight machine: 8,5 kg 

Weight stand: 7,9 kg 

mains supply: 

100/115/230 V, 50/60 Hz 

machine rating: 210 W 

delivery rate: 15,8 l/min 

Vacuum power: -800 mbar 

100 ml 250 ml 500 ml 750 ml 1000 ml 


dimensions: Ø 415 x 465 

Weight: 8.5 kg 

Power supply: 230 V/115V, 50/60 Hz 1.1 kW 

airflow/vacuum: 

40 l/s /2400 mbar 

suction bag size: 12 l 

suction hose dia. 32 

Smartbox X2 

116170 smartbox X2 

230 V (115 V = 116170V115) 

delivery volume: Basic unit with integrated 8 kg plaster container, 

3 l water container, power cable 

116101 Protection cover 

117201 Beaker distance piece (2 items) 

available from October 2009 

Smartmix X2 

115700 smartmix wall mounting 230 V 

(110/115 V = 115600V100/V115) 

delivery volume: basic unit with beaker 500 ml, for wall-mounting, 

drilling template, 4 screws with dowels, 1 replacement filter. 

115730 stand for smartmix X2 

115620 Beaker with mixing blade 100 ml 





115631 Beaker 250 ml 

115641 Beaker 500 ml 

115651 Beaker 750 ml 

115661 Beaker 1000 ml 

115701 spare filter for smartmix X2, 5 pcs. 

available from Juli 2009 

dust extractor aS400 

mobile single-place extraction with two-step filter system and microfilter 

as third step (also suitable for sandblasting cabins). Powerful, 

quiet „turbo-flo“ unit (patented). 

_ High suction power at low noise development (46 dB[a]) 

_ filter system for very fine dusts > 0.5 μm, efficiency 99 % 

114960 as400/micro (three-step filter) 

114953 Bags, 10 pcs 

m | 32 

m | 33


alpenrock 

711110 gold 20 kg carton (5 x 4 kg-Bag) 

711111 gold 1 x 4 kg-Bag 

711120 pastell 20 kg carton (5 x 4 kg-Bag) 

711121 pastell 1 x 4 kg-Bag 

711130 safran 20 kg carton (5 x 4 kg-Bag) 

711131 safran 1 x 4 kg-Bag 

artifix ® 

711211 7,5 kg 

711217 20 kg 

girostone ® 

american natural super-hard plaster, class 4, universal for all prosthetic 

applications, material of choice for situation and master models – 

also for fully prosthetic working models due to its low brittleness 

_ cost-efficient high-quality natural super-hard plaster in three colours 

711021 rosé 20 kg carton 

711022 pastell 20 kg carton 

711023 yellow 20 kg carton 

girodur ® 

synthetic class 4 super-hard plaster for stump and master models. 

_ low-price alternative to all precision model types 

711105 white 20 kg carton 

girobase 

class 4 base plaster for precision saw-cut model in solid (white) or 

liquid (blue consistency). 

_ Optimal flow properties, 2/5 min (white/blue) processing time 

_ little expansion, smooth surface, high final hardness 

711240 white (solid 20 kg carton 

711250 blue (liquid) 20 kg carton 

giroplast 

high-strength synthetic plaster for full prostheses, especially for 

plastic extrusion techniques (e.g. polyan). the great working pressure 

during insertion of the plastic material into the container requires 

high pressure-resistance to counteract deformation. 

_ high strength for plastic extrusion 

_ expansion values adjusted to full prostheses 

711040 green 20 kg carton 

711050 blue 20 kg carton 

711060 white 20 kg-carton 

m | 34 

m | 35 

m | 36 

m | 36 

m | 36 

m | 36 

B | 15

B | 16 


Farbe blau grau gold silber rot 

schichtstärke 20 μm 20 μm 15 μm 13 μm 8 μm 

giroform ® 

die link 

With Giroform ® 

die link, amannGirrbach presents a series of airdrying 

die varnishes which, for the first time ever, contain innovative 

chemical primer components as well as nano particles. these 

new ingredients ensure excellent bonding of Giroform ® 

die link to 

dental plasters or stones and provide smooth and scratch resistant 

surfaces of the die varnishes optimized for dental technology. the 

superthixotropic consistency of Giroform ® 

die link guarantees an 

even, homogeneous layer thickness. 

giroform ® 

die link - die Varnishes 

_ Giroform ® 

die link is available in 5 colors and in 5 different layer 

thicknesses (between 0 μm - hardener - and 20 μm). 

_ high bond strength to the die thanks to primer technology 

_ no flaking-off during steamcleaning 

_ the smooth, homogeneous surface allows easy removal of the wax 

modellation. 

_ thanks to the high scratch resistancy, the surface is almost undamageable. 

_ the superthixotropic behaviour of Giroform ® 

die link allows to 

evenly apply the varnishes all over the die. 

_ no multiple applications on the edges 

_ no drop formation 

giroform ® 

die link Hardener (0 μm) with color indicator 

_ safety and control during the application of the hardener thanks to 

the colour indicator 

_ no multiple applications 

782110 Giroform die link hardener (0 μm) 15 ml 

782111 Giroform die link hardener clear (0 μm) 15 ml 

782120 Giroform die link blue (20 μm) 15 ml 

782130 Giroform die link grey (20 μm) 15 ml 

782140 Giroform die link gold (15 μm) 15 ml 

782150 Giroform die link silver (13 μm) 15 ml 

782160 Giroform die link red 

782170 Giroform die link thinner 

(8 μm) 15 ml 

giroform ® 

giroform ® 

die link lube insulation 

Insulated the plaster model from wax and is specially adjusted to die 

link matte varnish. 

_ Insulates also when used sparingly 

_ non-alcoholic and solvent-free 

_ Water-soluble 

_ non-reactive with embedding mass 

782180 Giroform die link lube, insulation 15 ml 

die link starter-set 

782100 Giroform die link starter-set 

content: 1x Giroform die link hardener, 1x Giroform die link blue, 1x Giroform die 

link grey, 1x Giroform die link thinner, 1x Giroform die link tray


! 

abrasive belt/mandral 

for pre-trimming of model stumps and trimming of tooth arches. 

_ Quick, efficient and vibration-free removal of material 

815300 mandral cylindrical 

815310 grain 80 50 pack IsO 070, length 11 mm 



Model boxes/model cases 

deep-drawn transparent box for transporting dental models, self-locking, 

with 2 foam rubber cushions. 

_ Various sizes and heights, also for plastic bases 

_ cost-efficient bulk packaging of 30 pieces each (10x3 units) 

511430 small (78 x 70 x 45) 

511450 large (90 x 80 x 60) 

511460 x-high (90 x 80 x 80) 

511470 x-large (100 x 90 x 90) 

511540 ! model case 

separit 

Insulating material plaster against plaster with simultaneous surface 

protection against moisture absorption. 

_ seamless separation on dry and wet surfaces 

714020 250 ml with spray head 

714030 1 l bottle 

girosolve Pro 

Plaster dissolution with high dissolving speed and capacity, for all 

kinds of plasters and plaster-bonded investments. dissolves and 

removes plaster remainders from dentures, impression trays, mixing 

bowls, and cast objects. 

_ higher effectiveness and economy - increased by 20 %, control 

through bubble activity 

_ no acids, neutral ph-value, suitable for all materials 

_ efficiency multiplies if used in an ultrasonic bath 

_ disposal of used solution through the sewage system 

714050 Girosolve Pro, 2 l 

B | 17

B | 18 


steamer X3 

116910 steamer X3 230 V 

delivery volume: mounting template, Instruction for use, test strips for measuring 

water hardness, 1 x 250 ml bottle of Kalk-X descaling liquid Power cord, set of safety 

cap gaskets (white teflon gasket and silicone gasket) 


116811 Kalk-X liquid (4 x 250 ml) 

116814 small sieve, Ø 50 mm 

116815 small sieve, Ø 75 mm 

116813 funnel 

516330 clean steamer 

516340 stymo net 

116911 complete safety cap 

116912 sealing for screw cap 


dimension: 275 x 265 x 455 mm 


mains supply: 230V/50 hz 

machine rating: 1600W 

e-fuse: t10a 

Boiler volume: 3.7 l 

Vapor pressure: 4.0 bar 

Warm-up time: approx. 25 min 

Cleansteamer 

hollow cylinder with hinged lid and sieve portion to collect impure 

small parts (teeth, crowns, etc.). By opening the hinged lid, saturated 

steam is blown into the object carrier. addition of dishwashing liquids 

possible. 

516330 cleansteamer 

516338 steamer X3- adapter 

spare parts: 

516332 lid handle insulation 

516333 steam inlet insulation 

516334 hinged lid insulation 

stymonet 

self-locking tweezers with fine-mesh stainless plastic net to fix delicate 

objects such as ceramic teeth; inlays etc. during cleaning with 

saturated steam. 

516340 stymonet 

individualitas naturae dentis 

individualitas dentis naturae 

m | 37 

by Knut Miller 

this didactically valuable manual conveys enlightenment and enthusiasm 

for the conscious imitation of individual and natural tooth shapes. 

Within this comprehensive anatomical atlas: In the form of a table-top 

reference book, the dentist and dental technician are provided with an 

understanding of the basic anatomical shape of natural teeth, their 

specific characteristics, the relationship between ridges, position of 

cusps, contact situations, the patient’s specific stages of life and much 

more. 

high quality print and materials: hardback, 139 pages including 154 

illustrations. 

920150 table-top manual – tooth shapes

Order InfOrmatIOns CeramIll mall Framework management 

order InFormatIons 

amannGIrrBaCh Framework management 

CeramIll mall 

B | 19

B | 20 

Framework management CeramIll mall Order InfOrmatIOns 

technical data map100 

dimensions: 426x328x603 

Weight: 33 kg 

Power supply: 230 V 1,25 a 

e-fuse: t1,25 a 

Output: 50 Watt 

accuracy: 20 µm 

axes: 2 

recommended installation site: 

table, no direct sunlight 

technical data map300 


Weight: 57 kg 

Power supply: 230 V 1,25 a 




axes: 4 



Ceramill outsource digital 100 

179100 Ceramill map100 (part automatic scanner) 

179150 Ceramill mind (Cad sW) 

179170 PC incl. monitor, keyboard, mouse 

without furnace and extraction 

Ceramill outsource digital 300 

179100 Ceramill map300 (full automatic scanner) 


179151 Ceramill mind artex Cr 

(additional feature virtual articulator) 



Ceramill Inhouse digital motion 

179200 Ceramill motion 

incl. Ceramill match (milling device incl. Cam sW) 



estimated delivery of Ceramill motion, end of 2009 

technical data motion 


Weight: 58 kg 

Power supply: 230 V 5 a 



Compressed air connection: 

dry, clean compressed air, 

6 bar max. 50 l/min 

engine speed: 60.000 rpm 

torque: 4 ncm 

Collet chuck: 3 mm 


axes: 3,5 

Jäger spindel 

Cut ball screw 



f | 10 

f | 12 

f | 11 

f | 12 

f | 13 

technical data PC 

Processor speed/model: 

Intel Core 2 Quad 2.40Ghz 

memory: 4 GB ram 

hard drive: 250 GB 

Graphics: nvidea Quadro 

Operating system: 

Windows XP, recovery software, 

Virus protection norton antiVir 

display: 19 inch 

resolution pixel: 1280x1024 

(Changes, in the sense of better 

function, performance, service life 

and technical improvements are 

subject to alterations.) 


away from the floor, not on the wall


Ceramill Inhouse digital 100 

179100 Ceramill map100 (part automatic scanner) 







Ceramill Inhouse digital 300 

179110 Ceramill map300 (full automatic scanner) 


179151 Ceramill mind artex Cr 

(additional feature virtual articulator) 






Ceramill airstream 

for Ceramill motion, Ceramill multi-x and smartbox Invest 

178600 Ceramill airstream 230V 


Ceramill scanmarker 

Ceramill scan marker is a powder spray that is applied to the surface 

of models or teeth to improve their visual characteristics when using 

a camera or scanner in the Cad/Cam technique. suitable for extraoral 

use. 

760562 Ceramill scanmarker 50 ml 

f | 10 

f | 12 

f | 13 

f | 11 

f | 12 

f | 13 

B | 21

B | 22 



d/B/h: 498 x 398 x 450 mm 

required head space for moving: 

560 x 480 x 450 mm 


electr. connected load: 

230/115/100 V 50/60 hz 

e-fuse: t1a 

Output: 125 W 

Compressed air connection: 

6-8 bar, 50 l/min 

Variable engine speed: 

1.000 - 35.000 min-1 

torque: 7,5 ncm 

Voltage of lamp connection: 12 V 

Output of lamp connection: 20 W 

Collet chuck: ø 3 mm 

sound level: max. 65 dba 

tipping angle spherical shell table: 

ca. 19° 

Ceramill multi-x 

f | 15 

178500 Ceramill mulit-x complete machine 

delivery volume: milling / sensory unit (Vertical pantograph on radial guide), 

table unit (spherical shell table), Balancing weights for the spherical shells, foot 

switch for fixation of the table (vacuum), motor unit including collet wrench 

3 mm, led double illumination, aspiration adapter, Connector for central or 

single-place aspiration, dust protection cover (1 piece), support plates for 

model and blank 31/51, Positioning aid 31/51, Calibration plates for model and 

blank, spirit level for adjustment of the table including mounting pegs 

178510 Ceramill multi-x Upgrade Kit 

(applicable for Ceramill Base) 

delivery volume: milling/sensory unit (vertical pantograph), table unit (spherical 

shell table), balancing weights for the spherical shells, foot switch for fixation of 

the table (vacuum), siphon adapter, dust-proof cover (1 unit), mounting plate for 

modelling and 31/51/71 blanks, calibration plates for modelling and blanks, spirit 

level for adjusting the table including mounting pegs, adjustment set 

accessories: 

114960 as400 micro, laboratory suction with 

fine particle filter 

178518 dust protection cover for milling side, multi-x, 2 pieces 

178127 dust protection cover for milling side, Base, 2 pieces 

178139 Counterweight milling arm, 1 piece 

178519 Knurled screw for scanning side 

Ceramill material-starterkit 

760011 delivery specification: see label H 

Ceramill teleskopkit starterset 

f | 24 

760500 starterset 

delivery volume: Ceramill ZI tC l (12 blanks), telescope- Kit Blank holding plate 

(1 pcs.), telescope-Kit model holding plate (1 pcs.), telescope- Kit model holding 

pins (1 pcs.), Ceramill roto tCtO, Ceramill roto tCfO, Ceramill roto tCt1, Ceramill 

roto tCf1, Ceramill roto tCt2, Ceramill roto tCf2 

accessories: 

760110 Ceramill ZI tC l (12 blanks) 

760501 telescope- Kit Blank holding plate (2 pcs.) 

760502 telescope- Kit model holding plate (1 pcs.) 

760503 telescope- Kit model holding pins (5 pcs.) 

760504 Ceramill roto tCtO 

760505 Ceramill roto tCfO 

760506 Ceramill roto tCt1 

760507 Ceramill roto tCf1 

760508 Ceramill roto tCt2 

760509 Ceramill roto tCf2


! 

@ 

# 

! 

@ 

% 

@ 

! 

# 

$ 

^ 

Ceramill ZI Cam 

# 

% 

Blanks for Cad/Cam processing 

760205 ! 40x20x16, 6 pc. 

760206 ! 40x20x16, 30 pc. 

760209 @ 98x10, 1 pc* 

760210 @ 98x10, 8 pc* 

760211 @ 98x14, 1 pc.* 

760212 @ 98x14, 8 pc.* 

760213 @ 98x16, 1 pc.* 

760214 @ 98x16, 8 pc.* 

* Ø approx. 98.8mm 

** with notch, Ø approx. 98.8mm 

^ 

$ 

Ceramill ZI – Y-tZP 

For use with Ceramill Base und multi-x 

760101 ! Ceramill ZI Preforms 12 blanks h = 16 mm H 1x 

760102 ! Ceramill ZI Preforms l 12 blanks h = 20 mm 

760116 @ Ceramill ZI 31 zirconium-oxide blanks, 

40 x 20 x 16 mm, pack of 6 H 1x 

760143 # Ceramill ZI 51l zirconium-oxide blanks, 

65 x 30 x 20 mm, pack of 3 H 2x 

760184 $ Ceramill ZI 71l zirconium-oxide blank, 

dental arch shape, h = 20 mm, pack of 1 

Blanks and frames for use with Ceramill Base: 

760185 % frame for blank ZI 71 (multiple use), 

pack of 1 

760181 ^ Ceramill ZI 77l zirconium-oxide blank 

98 x 20 mm, pack of 1 

760183 ^ Ceramill ZI 77Xl zirconium-oxide blank 


Blanks and frames for use with Ceramill multi-x 

760188 % frame for blank ZI 71 (multiple use), 

pack of 1 

760186 ^ Ceramill ZI 77l zirconium-oxide blank 


760187 ^ Ceramill ZI 77Xl zirconium-oxide blank, 


760215 @ 98x18, 1 pc.* 

760216 @ 98x18, 8 pc.* 

760217 @ 98x20, 1 pc.* 

760218 @ 98x20, 8 pc.* 

760219 @ 98x25, 1 pc.* 

760221 # 98x14 n, 1 pc.** 

760222 # 98x14 n, 8 pc.** 

special sizes and prices 

on request 

Holding Plates 

Plastic plates for the fast clamping of plastic models ensure secure 

positioning in the milling unit. 

For use with Ceramill Base and Ceramill multi-x: 

f | 22 

760910 ! holding Plates Preforms pack of 50 H 

760919 @ holding Plates 31/51 – holding plates for synthetic 

760941 

modelling (for use with Ceramill ZI 31/51) pack of 50 H 

# holding Plates 71/77 – holding plates for synthetic 

modelling (for use with Ceramill Base und multi-x, 

suitable for Ceramill ZI 71/77) pack of 5 H 

Frames for holding plate for use with Ceramill Base 

760942 $ frame (multiple use) with integrated positioning 

guide for holding plate, pack of 1 

Frames for holding plate for use with multi-x 

760943 $ frame (multiple use) with integrated positioning 

guide for holding plate 71/77 pack of 1 

Positioning aids: 

760223 # 98x16 n, 1 pc.** 

760224 # 98x16 n, 8 pc.** 

760225 # 98x18 n, 1 pc.** 

760226 # 98x18 n, 8 pc.** 

760227 # 98x20 n, 1 pc.** 

760228 # 98x20 n, 8 pc.** 

760229 # 98x25 n, 1 pc.** 

f | 21 

f | 21 

760971 % Positioning aid 31/51 

(incl. in delivery volume of 178500) 

760972 ^ Positioning aid Preforms H 

B | 23

B | 24 


! 

@ 

! 

@ 

# 

$ 

% 

^ 

& 

* 

( 

BL 

BM 

BN 

BO 

BP 

Ceramill sep – thinner and more 

reliable coating, lemon-scented 

Ceramill marker - excellent adhesion 

during processing with a water-cooled 

laboratory turbine. marks imperfections 

without depositing anything 

dry solutions, size 100 ml: 

760471 Ceramill liquid Cl1 




BQ 

BR 

BS 

BT 

BU 

CL 

CM 

CN 

CO 

CP 

CQ 

CR 

CS 

CT 

CU 

DL 

Ceramill roto 

760801 ! t 4 mm 

760701 @ f 4 mm 

760831 # t 3 mm H 

760731 $ f 3 mm H2x 

760821 % t 2 mm H 

760721 ^ f 2 mm H2x 

760811 & t 1,2 mm H 

760711 * f 1,2 mm H 

760809 ( t 0,9 mm 

760709 BL f 0,9 mm 

760851 BM t 0,6 mm 

760751 BN f 0,6 mm 

760840 BO Ct 2 mm 

760740 BP Cf 2 mm 

760891 BQ Kt 2,5 mm 

Ceramill gel/Pontic 

light-hardening modelling synthetics for crowns and intermediate 

bridge elements. 

Ceramill sep 

Isolates the modelling resins Ceramill Gel/Pontic from gypsum and 

stump varnish (especially Giroform die link). 

Ceramill marker 

Blue, oil-based contact paste for fitting zirconium oxide crowns 

(e.g. Ceramill ZI). 

f | 23 

f | 25 

760514 ! Ceramill Gel - light-hardening synthetic modelling 

material for crowns, green. Pack of 4 x 3 g H 3x 

760522 @ Ceramill Pontic - light-hardening synthetic modelling 

material for intermediate bridge elements, blue. 

Pack H 2x 

760561 Ceramill sep H 

760021 Ceramill marker H 

583150 Paste brush 

Ceramill Liquid 

760791 BR Kf 2,5 mm 

760892 BS Kt 1,8 mm 

760792 BT Kf 1,8 mm 

760861 BU st2 mm 

760761 CL sf 2 mm 

760871 CM st 1,2 mm 

760771 CN sf 1,2 mm 

760881 CO st 0,6 mm 

760781 CP sf 0,6 mm 

760830 CQ Ut 3 mm 

760730 CR Uf 3 mm 

760820 CS Ut 2 mm 

760720 CT Uf 2 mm 

760819 CU tt 2 mm 

760719 DL tf 2 mm 

four dilutable waterbased dye solutions for safe handling and 

individual colouring of the blanks. 

760470 Ceramill liquid - complete set H 

4 dye solutions, 100 ml, each + cans + tweezers



dimensions: 145 x 300 x 30 mm 

+ swan neck (app. 800 mm) 


! 

# 

@ 



furnace chamber volume: 1 l 

electrical supply rating: 230 V 50/60 hz 

max. power consumption: 3.2 kW 





dimensions: Ø 415 x 465 


Power supply: 230 V/115V, 50/60 hz 

1.1 kW 

airflow/vacuum: 

40 l/s /2400 mbar 

suction bag size: 12 l 

suction hose dia. 32 


dimension: 300 x 140 x 30/630 

Weight: 3 kg 

mains supply 230 VaC/50 hz/5 W 

luminance/angle 13,9 lm/75°-85° 

Ceramill UV 

Ceramill therm 

178350 Ceramill therm 

delivery volume: Ceramill therm sintering furnace; sintering shell, 

100 x 80 x 15 mm; sintering pearls, 200 g, dia. 1 mm 

accessories: 

178360 ! stackable sintering bowl, 1 pcs 

stackable only in Ceramill therm (178350) 

178361 @ Gripper for sintering shell, stackable 

178311 

# sintering pearls 200 g, Ø 1 mm 

178310 sintering shell, 100 x 80 x 15 mm 

Ceramill aqua 

177500 Ceramill aqua 

delivery volume: Basic unit with model table mt3; trap dish 

accessories: 

177520 Worklight 

177511 adapter nsK Presto aqua 

132300 nsK Presto aqua 

as400 micro dust extraction 

f | 25 

Polymerisation lamp with motion sensor for rapid, reliable hardening 

of modelling synthetics 

_ Proximity on/off switch for convenient use and freedom from glare 

_ Wavelength carefully matched to synthetic material for reliable 

polymerisation 

_ audible signal at end of controlled polymerising time means that 

polymerisation can be accurately reproduced 

178200 Ceramill UV 

f | 17 

mobile single-place extraction with two-step filter system, an optional 

with additional microfilter as third step (as400micro, also suitable 

for sandblasting cabins). Powerful, quiet „turbo-flo“ unit (patented). 

_ high suction power at low noise development (46 dB[a]) 

_ filter system for very fine dusts > 0.5 μm, efficiency 99 % 

114960 as400micro (incl. three-step microfilter) 

114953 Bags, 10 pcs. 

114961 Power controller for as400 micro 

worklight 

twin worklight with two lamps on led basis, mounted on a solid, curved 

foot, ideal for Ceramill. to be used at each workplace or with each unit 

operated, ready within no time. high optical power and long burning 

time. 

_ Bright cold light with 30 lumen and a color temperature of 7,000 K 

_ flexible lamp necks for spot illumination of the workpiece. 

177520 Worklight 

B | 25

B | 26 


technical and physical data 

mixing ratio: 100 : 25 

mixing time: 105 s 

Working time: 5 min 

Initial setting: 9-11 min 

setting time: 25 min 

Compression strenght after 2 h: 4-8 mPa 

„speed“ temperature: 850° C 

Preheat temperature: max. 1050° C 

Overall expansion: max. 4 Vol.-% 

smartbox Invest 

117200 smartbox Invest 

delivery volume: basic unit incl. investment container, 2 tanks for liquid and 

water, power cord 

accessories: 

117201 rising socket for beaker 

117202 desiccant bag, 5 pcs. 

781685 Giroinvest super, 2 x 4 kg 

724090 Giroinvest super liquid 1 l 



Weight: 25 kg 

electrical fuse: t2a 

Power rating: 100 W 

mains supply: 230 V/50 hz-115 V/60 hz 

amount dispensed max. 1000 g Powder 

Capacity liquid: 1 l 

Capacity powder: ca. 4 kg 

giroinvest super 

781670 Giroinvest super Powder 40 x 150 g-bag = 6 kg 

781680 Giroinvest super Pulver 50 x 100 g-bag = 5 kg 

781685 Giroinvest super, 2 x 4 kg 

724090 Giroinvest super liquid 1 l 

781679 measuring cup 100 ml 

521410 expander Casting ring liner 50 mm x 1 mm 

giroinvest speed 

724070 Giroinvest speed Powder 5 x 4 kg bag = 20 kg 

724072 Giroinvest speed Powder 100 x 200 g bag = 20 kg 

724081 Giroinvest liquid 1 l 

f | 26 

f | 27 

f | 32


girobond ® nBs 

Packaging: 

781610 Girobond nBs 1.000 g 

781611 Girobond nBs 50 g 

girobond ® CBs 

781690 Girobond CBs 1.000 g 

781691 Girobond CBs 50 g 

girosolder 

781630 Girosolder, 3,6 g 

781560 soldering Paste 18 g tin 

girocrom ® FH 

721250 Girocrom fh, 1.000 g - laboratory pack 

721251 Girocrom fh, 50 g - trial 

f | 29 

f | 30 

f | 31 

B | 27

B | 28 


light weight, high stability, low heat 

conductivity, good laser welding behavior. 

these excellent features distinguish 

Girotan l. 

the bond strength between Girotan l/ 

digitan and the facing porcelain corresponds, 

according to the schwickerath 

test, to the values of precious metals, 

no matter if cast or milled. Creation-like 

esthetics. 

sem picture (magnification 650:1) showing 

a marginal area without alpha-case 

layer (University dental Clinic tuebingen/ 

Germany, Prof. Juergen Geis-Gerstorfer/ 

Prof. Wolfgang lindemann) 

girotan ® L 

titanium alloy (ti6al7nb) is a chemically inert material that has 

been used as implant material for medical indications in men since 

more than 20 years already. same degree of biocompatibility, same 

low heat conductivity, and as light-weight as pure titanium. however, 

Girotan l exceeds the strength of pure titanium by factor 3. 

_ easy to work, polishable like gold 

_ suitable for any indication since light-weight and highly stable 

_ radiopaque, chemically neutral, low heat conductivity 

_ minimum material costs, maximum benefit for the trade 

girotan L (ti6aI7nb-alloy): 

764321 Ø 26 x 8,4 mm, 50 x 20 g-Ingots 

764331 Ø 26 x 12,6 mm, 34 x 30 g-Ingots 

764341 Ø 29 x 13,5 mm, 25 x 40 g-Ingots 

721141 Girotan-laser welding wire 0,35 x 2 m 

721120 titanium welding wire 0,5 x 2 m 

721121 titanium welding wire 0,25 x 2 m 

technical and physical data 

Pure titanium and titanium alloy may only be melted with the electric arc method 

under high vacuum and with argon gas protection (ticast/symbiocast). 

giroinvest t 

Girotan L 

melting range 1.650° C 

tensile strength rm [mPa] 850 

Proofstress rp 0,2 % [mPa] 750 

modulus of elasticity e [GPa] 110 

elongation at rupture a [%] > 8 

Vickers hardness hV 10 325 

density [g/cm3] 4,52 

WaK [25-500° C] 10,1 x 10 -6 K -1 

alloy color silver 

Oxid color grey 

magnesium zirconium investments for titanium casting. the special 

mgO-ZrO combination prevents reactions between the molten metal 

2 

and the investment as well as the formation of an alpha-case layer 

and reliably controls the expansion, thus ensuring excellent fitting 

precision. 

_ Well-coordinated expansion control for crown 

and bridge work/CoCr cases 

_ homogeneous mixture with distilled water 

_ Perfect fit without further processing 

_ easy polishing, high surface density due to cold casting 

764050 Giroinvest tC Powder 25 x 200 g bag = 5,0 kg 

764060 Giroinvest tm Powder 20 x 180 g bag = 3,6 kg 

764070 Giroinvest td Powder 10 x 700 g bag = 7,0 kg


! @ # $ % ^ 

the Waxjet in action – e.g. during 

filling of the gingivobuccal fold. 

rapidly ready for use – one touch 

is enough. 

noflame ® Plus 

smartwax duo 

116270 smartwax duo, basic unit 

delivery volume: control unit with mains adaptor, handpiece with cord 

(116280), probe small incl. handle (116281), cotton role holder 

116280 handpiece with cord 



Cable length of handpiece: 1,8 m 

electrical specifications of mains adaptor: 110 - 230V 50/60 hz 

Output: 6 V, Power: 12 W 

temperature range: 50 - 220 °C / 122 - 428 °f – switchable 

accessories: 

116281 

! Probe small incl. handle 

116282 @ Probe large incl. handle 

116283 # needle incl. handle 

116284 $ Beaver tail incl. handle 

116285 % Knife incl. handle 

116286 ^ spoon incl. handle 

116229 dental rolls, 100 pcs. 

f | 33 

116250 

delivery volume: basic unit with power cable, 2 protective covers, instructions 

for use 

116210 Protective caps/10 pcs. 



Weight: 600 g 

mains supply: 230 V/50 hz/130 W 

waxjet (pat. pend. Ztm Jonas) 

f | 34 

Intelligent solution for application of wax. the continuous wax supply 

via the unique feeding mechanism of the Waxjet allows the dental 

technician to quickly apply a big amount of wax. the fluidized wax 

gets through the concave probe to the tip and the quantity of the wax 

can be determined individually by the technician - depending on, how 

quickly the wax wire is put forward with the help of the driving pulley. 

_ no annoying wax taking up 

_ for quick superficial fusing and application of wax 

116287 Waxjet incl. handle 

116289 Waxjet + handpiece with cord 

641060 Waxjet wire pink / 6,0 / 280 g 

B | 29

B | 30 


adapters to the fit (Ø 33 mm-hole) 

177063 adapter KaVo K5 




177053 adapter nsK Ultimate 400 

177066 adapter nsK Ultimate 500 Cm 

177067 adapter nsK Ultimate 500 tm 

177054 adapter nsK Volvere eP 

milling device aF350 

177605 

delivery volume: basic unit with vertical lift, milling arm with W&h motor 

spindle, model table mt3, twin led lamp, cover 


177998 Blockout-Upgrade-Kit af350, adjustable, 3 parts 

(for current version (see image)) 

delivery volume: Blockout-set 177990, marking stick 17800, 

adapter sleeve af350 adjustable 177994 

177995 Blockout Upgrade-Kit af350, 4 parts 

(for previous version) 

delivery volume: Blockout-set 177990, adapter cord 177993, 

marker 177800, adapter cord for marker af350 177806 

177800 marker 

177661 W&h Collet 3 mm 



Weight: 15 kg 

mains supply: 100/115/230 V, 50/60 hz 

motor speed: 1.000 – 35.000 min-1 

torque: max. 7,5 ncm 

Blockout Parallelometer aP100 

177700 aP100 (without model table) 

delivery volume: basic unit with jointed arm P (177131) and marker (177800) 


177360 model table mt2 

177350 model table mt3 

216291 model table mt3 „splitex“ 

177960 Blockout-set (P. 4 | 3) 

177991 adapter cord aP100/diacut (for Blockout) 

177450 halogen lamp 

177071 milling head 




range of collet: 1 – 3 mm 

mains supply: 115 V/230 V – 50 hz 

Power: 22 W 

milling Head 

f | 36 

f | 37 

Vertically movable reception for motor spindle, Ø 33 mm. to be used 

at the jointed arm. micrometer screw (lift 25 mm) to determine drilling 

depth as well as spring power adjustment to limit the vertical 

movability. as upgrade for aP100. 

177071 

177055 adapter schick C2 Profi 

177062 adapter schick C3 

177056 adapter schick Cn 

177057 adapter W&h elco s 

177058 adapter W&h elco 2 

177061 adapter W&h Perfecta 

177065 adapter Presto-aqua/degudent f1/f2/f3 

177060 adapter custom-made product


! @ 

# 

Blockout 

heatable blockout blades 0° to 6°, with parallelly guided plug-in contact 

for handpiece connection. to be inserted into the chuck of the 

marker (Ø 3 mm). Connection to any controllable voltage source providing 

24 V (e.g. 171161). 

177990 Blockout and 5 inserts 0° – 6° 


177991 adapter cord aP100/diacut/Blockout 

177992 adapter cord af300/aPf400 

177993 adapter cord l af350/aPf450 

177806 adapter cord for surveyor af 350 

177994 adapter cord af350 adjustable 

177980 Blockout insert 0° Ø 1,3 mm 

177981 Blockout insert 0° Ø 2 mm 

177982 Blockout insert 2° conic 



177960 Blockout-set aP100 inlcuding adapter cord aP100 

starterkit for milling technique 

Comprises, besides oil and training material, all tools required for surveying, 

scraping, setting, transferring and milling tasks (all items may 

be ordered separately as well). 

873001 starterkit for milling technique, 12 parts (as pictured) 

consisting of: 

177653 training cylinder (typ 1), ms-milling-training cylinder 

177654 milling example typ 2, ms-drill-training cylinder 

177655 training cylinder holder mt2/3 for fm typ 1+2 

177810 transfer support Piston-Ø 2,35 mm 

177820 transfer support Piston-Ø 3,0 mm 

177870 mine red 12-part 

177880 mine blue 12-part 

177860 Carbon marker holder 

177656 milling oil 5 x 50 ml 

177830 Undercut gauge 0,25 mm, Piston-Ø 3 mm 



171930 Plaster plate 

also: 

873002 milling set 12-part 

model table mt2/mt3/splitex 

mt2: inclinable table, from 0° to 90°, both final positions are under 

forced guidance, fixed with manual clamp lever. Plinth plate may be 

magnetized. 

mt3: inclination 0° to 41°, manual/electromagnetic fixation by 

degrees, 0/2/4/6° also mechanical (sleeve/ring); electromagnetic 

positioning. 

splitex: like mt3, however, with splitex magnetic plate to accept the 

model. 

177360 # mt2 model Platform / 0° - 90° 

177350 @ mt3 model table / 0° - 14° 

216291 ! mt3 model table/splitex 

B | 31

AmAnnGirrbach 

GenerAl InformAtIon 

Index 

AmAnnGirrbach 

a | 1

a | 2 

AmAnnGirrbach 

General information 

1 2 

3 

In this catalogue, the product information is restricted to some 

elementary features and applications. 

You will find more information in the according system brochures and/or leaflets. 


in general, all dimensions are 

indicated in millimeters (mm) 

lined up in depth/length x width 

x height: 

1. depth 

2. width 

3. height 

if this is not the case, the differing 

indications are clearly 

defined (e.g. diameter = Ø, 

drilling, thickness, etc.) 

delivery volume 

introductory kits of systems or 

basic equipment for units are 

presented, on one hand, as complete 

set and, on the other hand, 

as single articles with different 

article numbers for repeat 

orders. 

replacement parts 

... will be mentioned only in 

cases where there is high customer 

demand. all replacement 

parts are listed with article 

number in the unit’s manual. 

Changes, in the sense of better 

function, performance, service 

life and technical improvements 

are subject to alterations. 

amannGirrbach headquartered in austria and Germany enjoys an 

strong reputation worldwide for manufacturing innovative laboratory 

products and equipment made of the highest quality materials, featuring 

the latest technological advances.

A 

abrasive belt/carrier....................................................b|17 

adjustable clamp ............................................................b|5 

adjustment plate ............................................................b|11 

alloys ................................................................................f|28 

alpenrock ............................................................ m|34, b|15 

anterior Guidance artex .............................................. b|7 

artex articulators ...............................................m|14, b|2 

artex facebow ......................................................m|18, b|8 

artex modell plate ..........................................................b|4 

artex separating spray .................................................b|4 

artex typ cn .................................................................... b|2 

artifix ................................................................... m|35, b|15 

artigator ......................................................................... b|10 

attachment for plates ..................................................b|11 

axis-plane Pointer .........................................................b|8 

B 

bags aS400 ....................................................................b|14 

base collar ...........................................................m|29, b|13 

base plate ............................................................. m|27, b|11 

beaker with mixing blade ...............................m|33, b|14 

bite compound ...............................................................b|8 

bite fork .............................................................................b|8 

bite fork Support artex ...............................................b |9 

blockout ...........................................................................b|31 

blockout Parallelometer aP100 ...................f|37, b|30 

bonding alloys .............................................f|28-30, b|27 

book ...................................................................................b|14 

C 

centrofix ...........................................................................b|5 

ceramill aqua .................................................... f|25, b|25 

ceramill base .......................................................f|15, b|22 

ceramill color ................................................................b|24 

ceramill Gel .........................................................f|25, b|24 

ceramill holding Plates ................................... f|18, b|23 

ceramill m-center .........................................................f|14 

ceramill mall .....................................................................f|2 

ceramill map100 ................................................ f|10, b|20 

ceramill map300 .................................................f|11, b|20 

ceramill marker ............................................................b|24 

ceramill material Starterkit ......................................b|22 

ceramill mind ................................................. f|12, b|20-21 

ceramill motion ............................................. f|13, b|20-21 

ceramill Pontic ...................................................f|25, b|24 

ceramill roto ......................................................f|23, b|24 

ceramill Sep ...................................................................b|24 

ceramill teleskopkit .........................................f|24, b|22 

ceramill therm ...................................................f|17, b|25 

ceramill UV ........................................................ f|25, b|25 

ceramill Zi - YtZP ....................................f|18, f|21, b|23 

cleaning .........................................................................m|37 

cleanSteamer ................................................................ b|18 

clinometer ........................................................................b|5 

construction Software ceramill mind ... f|12, b|20-21 

counter-plate .........................................................m|17, b|3 

D 

Die link .............................................................................b|16 

Die Varnishes ..................................................................b|16 

Disc Set Splitex ............................................................... b|3 

Dosing ...................................................................m|32, b|14 

dublication flask Giroform ..............................m|29, b|13 

Duplication silicone ..........................................m|29, b|12 

Dust extractor aS400.....................................b|16, b|25 

E 

enlargement factor ......................................................f|16 

F 

facebow ..................................................................m|18, b|8 

furnace ..................................................................f|17, b|25 

G 

Girobase ...........................................................................b|15 

Girobond cbS .....................................................f|30, b|27 

Girobond nbS .....................................................f|29, b|27 

Girocrom fh .........................................................f|31, b|27 

Girodur ................................................................. m|36, b|15 

Giroform adapter for Vertex .....................................b|12 

Giroform base collar.........................................m|29, b|13 

Giroform base plates ......................................... m|27, b|11 

Giroform collar ...................................................m|29, b|13 

Giroform Die link ..........................................................b|16 

Giroform Die link lube insulation ...........................b|16 

Giroform Die link Starter-Set ...................................b|16 

Giroform dublication flask ..............................m|29, b|13 

Giroform labels .............................................................b|13 

Giroform magnetic discs .............................................b|13 

Giroform magnets and Sockets ................................b|13 

Giroform pin drill ...........................................................b|12 

Giroform pin drill ................................................m|26, b|11 

Giroform pins ......................................................m|28, b|12 

Giroform Putty ...................................................m|29, b|12 

Giroform quadrant plate .............................................b|12 

Giroform refractory Pin .............................................b|13 

Giroform secundary plate ...............................m|28, b|11 

Giroform Space retainer foil ......................................b|13 

Giroform Starter Kit ......................................................b|11 

Giroform System .........................................................m|22 

Giroform system components ................................m|25 

Giroinvest Speed ...............................................f|32, b|26 

Giroinvest Super ................................................f|32, b|26 

Giroinvest t ................................................................... b|28 

Giroplast .............................................................. m|36, b|15 

Girosolder .......................................................................b|27 

Girosolve Pro ..................................................................b|17 

Girostone ............................................................ m|36, b|15 

Girotan l ........................................................................ b|28 

H 

halogen lamp ...............................................................b|25 

hammer .............................................................................b|11 

holding Plates .....................................................f|21, b|23 

I 

impression carrier .........................................................b|11 

incisal needle ................................................................... b|7 

indications ........................................................................ f|5 

insulating material plaster - Separit .......................b|17 

investment for model casting ........................f|31, b|27 

investments.............................................. f|27, f|32, b|28 

J 

Joint Support ..................................................................b|8 

K 

Key, Splitex .............................................................m|17, b|3 

L 

labels Giroform .............................................................b|13 

lamp .................................................................................b|25 

M 

magnet removal Pin Splitex ....................................... b|3 

magnet Splitex ................................................................ b|3 

magnetic discs ................................................................. b|3 

magnets with Sockets and retention Disks..........b|13 

master Platform Set Splitex .......................................b|4 

master Platform Set Splitex ....................................... b|3 

measuring cup ................................................... m|35, b|14 

micrometer pin ................................................................ b|7 

mikrometerstift artex ................................................... b|7 

milling center ..................................................................f|14 

milling Device af350 ...................................... f|36, b|30 

milling Device ceramill motion ................ f|13, b|20-21 

milling example ..............................................................b|31 

milling head .................................................................. b|30 

milling tools ceramill roto ........................................f|23 

mixing ....................................................................m|33, b|14 

mixing beaker .....................................................m|33, b|14 

model boxes ....................................................................b|17 

model management ........................................................m|1 

model table mt 2/mt 3/splitex ................................b|31 

modeling station ............................................... f|34, b|29 

modell plate artex blue .............................................m|42 

modelling synthetics ........................................f|25, b|24 

mounting articulator ....................................................b|4 

mounting Glue Splitex ...................................................b|4 

N 

nasion ................................................................................b|8 

nasion .....................................................................m|18, b|4 

noflame Plus .......................................................f|33, b|29 

noplast ............................................................................ b|10 

Pin drill ..............................................................................b|12 

Pin drill ...................................................................m|26, b|11 

Pins ........................................................................m|28, b|12 

Plaster dissolution ........................................................b|17 

Plasticine..........................................................................b|12 

Polymerisation lamp ....................................... f|25, b|25 

Pontic ....................................................................f|25, b|24 

Porus buttons artex .....................................................b|8 

Putty Silicone .................................................................b|12 

AmAnnGirrbach 

OPQ 

Quadrant base Plate ....................................................b|12 

Quickbite artex ...............................................................b|8 

R 

radial pin .......................................................................... b|7 

refractory Pin Giroform .............................................b|13 

registration .................................................................... m|9 

retention Disks .....................................................b|3, b|13 

S 

Scanner ...................................................... f|10-11, b|20-21 

Secondary Plate .................................................m|28, b|11 

Separating spray ............................................................b|4 

Separit ..............................................................................b|17 

Set-Up index Key for the mandible ..........................b|6 

Set-Up index Key for the maxilla...............................b|6 

Set-Up templates ...........................................................b|6 

Silicone sleeve ....................................................m|29, b|13 

Smartbox .............................................................m|32, b|14 

Smartbox invest ............................................... f|30, f|44 

Smartmix..............................................................m|33, b|14 

Smartwax Duo ................................................... f|34, b|29 

Soldering Paste.............................................................b|27 

Space retainer foil ........................................................b|13 

Spare filter ......................................................................b|14 

Splitex ......................................................................m|17, b|3 

Splitex counter-plate ...........................................m|17, b|3 

Splitex keys ............................................................m|17, b|3 

Splitex mounting articulator ......................................b|4 

Splitex mounting Glue ...................................................b|4 

Splitex plate set ....................................................m|17, b|3 

Splitex Starter Kit .......................................................... b|3 

Spraymarker .................................................................. b|10 

Starter Kit ceramill .....................................................b|22 

Starter Kit for milling technique..............................b|31 

Starter Kit Giroform ......................................................b|11 

Starter Kit Quadrant ....................................................b|12 

Steamer X3 ..........................................................m|37, b|18 

Stones ............................................................m|34-36, b|15 

Stymonet ........................................................................ b|18 

T 

teleskopkit ceramill .........................................f|24, b|22 

template ...........................................................................b|6 

template flat ....................................................................b|6 

titanium .............................................................. f|28, b|28 

titanium alloy ................................................................f|49 

transfer Jig artex ..........................................................b|9 

transfer Stand artex .........................................m|19, b|9 

transfer table artex ..........................................m|19, b|9 

tray handle artex ................................................f|18, b|8 

UVW 

Vertex ................................................................................b|12 

Wax ...................................................................................b|29 

Waxjet ..............................................................................b|29 

Wide range of materials .............................................. f|21 

Worklight .........................................................................b|25 

XYZ 

Zi cam..............................................................................f|22 

Zirconium-oxide .....................................f|18-22, b|22-23 

a | 3

Amann Girrbach AG Herrschaftswiesen 1 

6842 Koblach | Austria 

Fon +43 5523 62333-399 

Fax +43 5523 55990 

austria@amanngirrbach.com 


www.hellblau.com 900028 Handel GB 0809

+ Model ManageMent - dentes.sk

Create successful ePaper yourself

Delete template?

Save as template?