ESA Document - Emits - ESA

More documents

Recommendations

Info

s For more detailed information, see section 3.2.1 Transfer Habitation Module. 2.7.7.1.2 Propulsion module HMM Assessment Study Report: CDF-20(A) February 2004 page 64 of 422 The propulsion module is split into three submodules, one for each main propulsive manoeuvre, as shown in Figure 2-29. 2.7.7.1.2.1 TMI Figure 2-29: Propulsion module It provides the required ∆V for the trans Mars injection manoeuvre. It is composed of three serial stages, each of them split into four identical stacks and a supporting structure. Cryogenic propulsion technology has been selected for this module. Each stack has a wet mass of 80 tonne to fit into Energia, and it is equipped with a single engine and the corresponding oxygen and hydrogen tanks. Stack characteristic Value Overall (tonnes) mass 80 Propellant 70.7 Figure 2-30: TMI stack characteristics mass (tonnes) Engine Vulcain 2 Thrust (kN) 1300 Diameter (m) 5 Length (m) 13.6
s The core supporting structure has a cylindrical shape, as shown in Figure 2-31: Supporting structure characteristics Value Overall mass (tonnes) 5.2 Diameter (m) 5 Length (m) 16.8 Figure 2-31: TMI supporting structure characteristics HMM Assessment Study Report: CDF-20(A) February 2004 page 65 of 422 The four stacks and the associated supporting structure are discarded once the burn is performed. The used stage will be provided by a small propulsion system that will allow the required manoeuvres for a controlled entry in the case of the first and second stage, or put it into a trajectory the does not impact Mars or the TV in the case of the third stage. 2.7.7.1.2.2 MOI It provides the required ∆V for the Mars orbit injection and final orbit acquisition manoeuvres. It is composed of two stages, each of them split into two identical stacks, and a supporting structure. Storable propulsion technology has been selected for this module. The first stage (orbit insertion) is composed of two stacks of 80 tonnes, while in the case of the second stage (final orbit acquisition, it is composed of two stacks of 50 tonnes each. Stack characteristics Value Overall mass (tonnes) 80 Propellant mass (tonnes) 76.3 Diameter (m) 5 Length (m) about 9.5 Overall mass (tonnes) 50 Propellant mass (tonnes) 47.7 Diameter (m) 5 Length (m) about 8 Engine RD-0212 Thrust (kN) 612 Figure 2-32: MOI stack characteristics The four stacks are attached to a supporting structure with a cylindrical shape.
Page 1 and 2:
s HMM Assessment Study Report: CDF-
Page 3 and 4:
s STUDY TEAM HMM Assessment Study R
Page 5 and 6:
s T A B L E O F C O N T E N T S HMM
Page 7 and 8:
Page 9 and 10:
s L I S T O F F I G U R E S HMM Ass
Page 11 and 12:
Page 13 and 14: s HMM Assessment Study Report: CDF-
Page 15 and 16: s L I S T O F T A B L E S HMM Asses
Page 19 and 20: s 1 INTRODUCTION 1.1 Background HMM
Page 21 and 22: s 2 GENERAL ARCHITECTURE 2.1 Study
Page 25 and 26: s 2.2.4.2 Accelerations HMM Assessm
Page 27 and 28: s 2.2.4.4 Temperature and relative
Page 33 and 34: s Figure 2-10: Trajectory Overview
Page 35 and 36: s 2.4.3.5 TEI and planetary protect
Page 45 and 46: s Mars Excursion Vehicle Transfer H
Page 47 and 48: s 2.7.5.1 Mission elements dry mass
Page 49 and 50: s 2.7.5.8 MEV release The MEV is re
Page 51 and 52: s Total mission time (days) 1200 10
Page 57 and 58: s stack 9 Propellant mass of the ne
Page 63: s HMM Assessment Study Report: CDF-
Page 67 and 68: s 2.7.7.1.3 Mars excursion module S
Page 69 and 70: s 2.7.7.1.4 Earth return capsule HM
Page 71 and 72: s Mission Phase Description Event s
Page 73 and 74: s Mission Phase Description Event s
Page 75 and 76: s 2.7.10 Mission performance Table
Page 77 and 78: s Days on Martian surface 450 400 3
Page 83 and 84: s Maximum manoeuvre duration 6 mont
Page 85 and 86: s % of loss from baseline 20 18 16
Page 87 and 88: s 2.7.15 Sensitivity analysis HMM A
Page 89 and 90: s 2.7.15.4 Influence of the mass of
Page 93 and 94: s Parameters used: • No Shuttle
Page 95 and 96: s 2.8.3.3 Launch 3- Front node Figu
Page 109 and 110: s 2.10.1.4 Communications HMM Asses
Page 113 and 114: s 2.10.2.2.2 LEO assembly HMM Asses
Page 115 and 116:
Page 117 and 118:
s Basic RF link Four 70-m Ka-band s
Page 119 and 120:
Page 121 and 122:
Page 123 and 124:
Page 125 and 126:
s 3 TRANSFER VEHICLE 3.1 Systems…
Page 127 and 128:
s Operational Requirements It shall
Page 129 and 130:
s Trans Mars Injection Module Mars
Page 131 and 132:
s Figure 3-2: Parallel configuratio
Page 133 and 134:
s Figure 3-6: Global dimensions com
Page 135 and 136:
s Front Node 3.2.3.1.3 EVA systems
Page 137 and 138:
s Trans Mars Injection (three stage
Page 139 and 140:
s Figure 3-16: Recommendations for
Page 141 and 142:
s Factors to be considered Impacts
Page 143 and 144:
Page 145 and 146:
Page 147 and 148:
Page 149 and 150:
s Figure 3-24: Baseline design back
Page 151 and 152:
s Figure 3-26: Baseline design priv
Page 153 and 154:
s Module part 3............= 0 m 3
Page 155 and 156:
s 3.3.2.1 Requirements and design d
Page 157 and 158:
Page 159 and 160:
Page 161 and 162:
Page 163 and 164:
Page 165 and 166:
Page 167 and 168:
Page 169 and 170:
Page 171 and 172:
Page 173 and 174:
Page 175 and 176:
Page 177 and 178:
s flux [W/m2] 250 200 150 100 50 0
Page 179 and 180:
s Figure 3-38: Power required to ma
Page 181 and 182:
Page 183 and 184:
Page 185 and 186:
s 3.3.4.3 Assumptions and trade-off
Page 187 and 188:
s 3.3.4.3.3 Power conditioning and
Page 189 and 190:
s 3.3.5 AOCS HMM Assessment Study R
Page 191 and 192:
Page 193 and 194:
s Configuration Length (m) Total ma
Page 195 and 196:
s 3.3.5.5 ACS for TMI 1 st HMM Asse
Page 197 and 198:
Page 199 and 200:
Page 201 and 202:
Page 203 and 204:
Page 205 and 206:
s 3.3.6.2 Baseline design HMM Asses
Page 207 and 208:
Page 209 and 210:
s 5 Reduce 2dB pointing precision t
Page 211 and 212:
s 70-m antenna 70-m antenna 3.3.7.5
Page 213 and 214:
s Angular separation SEM > 10º SEM
Page 215 and 216:
s Figure 3-63: Communications MEV/M
Page 217 and 218:
Page 219 and 220:
Page 221 and 222:
Page 223 and 224:
Page 225 and 226:
s Element 1: Transfer Habitation Mo
Page 227 and 228:
Page 229 and 230:
s Radiation Shielding Shielding Req
Page 231 and 232:
Page 233 and 234:
s The propulsion system and its cha
Page 235 and 236:
Page 237 and 238:
s Item Nr. Mass [kg] Margin [%] Mas
Page 239 and 240:
Page 241 and 242:
Page 243 and 244:
Page 245 and 246:
Page 247 and 248:
s 3.4.4 Mechanisms HMM Assessment S
Page 249 and 250:
s 4 MARS EXCURSION VEHICLE 4.1 Syst
Page 251 and 252:
Page 253 and 254:
s Figure 4-2: Option 2: Vertical co
Page 255 and 256:
Page 257 and 258:
s 4.3 Surface habitation module Fig
Page 259 and 260:
s Figure 4-11: Section through the
Page 261 and 262:
Page 263 and 264:
Page 265 and 266:
Page 267 and 268:
s 4.3.1.5.3 Top level Figure 4-20:
Page 269 and 270:
Page 271 and 272:
s Schedule in hours for the most ac
Page 273 and 274:
s 4.3.3.6 Waste production HMM Asse
Page 275 and 276:
s Figure 4-26: Total pressure vs. O
Page 277 and 278:
s ECLS system mass: Figure 4-27: Ma
Page 279 and 280:
Page 281 and 282:
s Figure 4-28: Mars albedo (L), ars
Page 283 and 284:
Page 285 and 286:
s sun flux (W/m2) 450 400 350 300 2
Page 287 and 288:
Page 289 and 290:
s Insulation structure (external) F
Page 291 and 292:
s cryocooler heat lift [W] cryocool
Page 293 and 294:
Page 295 and 296:
Page 297 and 298:
s • a duty cycle value (duration
Page 299 and 300:
s Figure 4-48: MAV Power Inputs HMM
Page 301 and 302:
Page 303 and 304:
s 4.3.5.4.2 Power storage HMM Asses
Page 305 and 306:
s Figure 4-52: Regenerative Fuel Ce
Page 307 and 308:
s Figure 4-54: Solar irradiance on
Page 309 and 310:
s 450.00 400.00 350.00 300.00 250.0
Page 311 and 312:
s 4.3.6.1 Budgets HMM Assessment St
Page 313 and 314:
Page 315 and 316:
Page 317 and 318:
Page 319 and 320:
Page 321 and 322:
Page 323 and 324:
s Surface Surface Container MAV Con
Page 325 and 326:
Page 327 and 328:
s 4.3.9.3 Baseline design 4.3.9.3.1
Page 329 and 330:
s Bio-Lock Masses: Core Samples No.
Page 331 and 332:
Page 333 and 334:
Page 335 and 336:
s Figure 4-72: Entry Velocity (L) a
Page 337 and 338:
Page 339 and 340:
Page 341 and 342:
Page 343 and 344:
s 2 3.9 233 923.1 347 923 12.3 352
Page 345 and 346:
s Figure 4-85: Communications MEV/M
Page 347 and 348:
Page 349 and 350:
s 4.4.5.3.2 GNC equipment HMM Asses
Page 351 and 352:
s 4.4.5.4 Control laws generation H
Page 353 and 354:
Page 355 and 356:
s Finally, the Figure 4-97 shown th
Page 357 and 358:
Page 359 and 360:
Page 361 and 362:
s velocity (m/sec) altitude (km) 50
Page 363 and 364:
s 4.5 Mars Ascent Vehicle 4.5.1 Tra
Page 365 and 366:
s Term Value Unit Radius of equator
Page 367 and 368:
Page 369 and 370:
Page 371 and 372:
Page 373 and 374:
s Inclination (deg) 47.5 47 46.5 46
Page 375 and 376:
Page 377 and 378:
Page 379 and 380:
s 4.5.3 Structures HMM Assessment S
Page 381 and 382:
Page 383 and 384:
s 4.5.5 Thermal HMM Assessment Stud
Page 385 and 386:
s 4.5.5.3 Baseline thermal design H
Page 387 and 388:
Page 389 and 390:
s Crew Ingress/Egress Hatch: HMM As
Page 391 and 392:
s Element 3: Mars Ascent Vehicle HM
Page 393 and 394:
s 4.5.7.5 Budgets Characteristic Va
Page 395 and 396:
s PER DAY PER MISSION DRINKING WATE
Page 397 and 398:
Page 399 and 400:
Page 401 and 402:
s 5 OVERALL CONCLUSIONS HMM Assessm
Page 403 and 404:
s 6 APPENDIX A - MARTIAN SURFACE NU
Page 405 and 406:
Page 407 and 408:
s Figure 6-1: Example of buried rea
Page 409 and 410:
Page 411 and 412:
s 7 APPENDIX B - REFERENCES [RD1] C
Page 413 and 414:
s [RD26] IES2, Phase A0: Final Repo
Page 415 and 416:
Page 417 and 418:
s [RD85] Mars Transportation Enviro
Page 419 and 420:
s 8 APPENDIX C - ACRONYMS AAA Avion
Page 421 and 422:
s MLI Multi-Layer Insulation MMH Mo
show all

ESA Document - Emits - ESA

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?